2016 MERCEDES-BENZ SL-Class display

XTo edit the access data:proceed as
described for manually entering the access
data (
Ypage 415).
When you confirm the edited access data,
the list of mobile phone network providers
appears and displays the selected provider.
If, after selecting a mobile phone network
provider, several access settings are dis-
played:
XSelect the appropriate access setting by
turning cVdthe COMAND controller and
press Wto confirm.
A menu appears.
XTo check access settings: selectEdit
and press Wto confirm.
The list of access data appears
(
Ypage 415).
XCheck the access data.
XIf the access data is correct: press the
% reset button or the &symbol and
press Wto confirm.
You can now accept the access data of the
mobile phone network provider.
XSelect Saveand press Wto confirm.
The list of mobile phone network providers
appears; the access data of the provider
has been accepted.
XTo edit the access data: proceed as
described in "Manually setting the access
data of the mobile phone network provider"
(
Ypage 415).
When you confirm the edited access data,
the list of mobile phone network providers
appears and displays the selected provider. The currently selected access settings (
#dot
in front of the entry) are used for the connec-
ted mobile phone.
XTo return to the carousel view: press the
% back button twice.
or
XPress Wthe COMAND controller and then
the % back button.
Manually setting the access data of the
mobile phone network provider
List of access data (new provider)
Calling up the list of access data
XConfirm Create New Providerin the list
of mobile phone network providers by
pressing Wthe COMAND controller.
The list of access data appears. The stand-
ard name Provider
is automatically
entered into the Provider:
field. You can
now make the entries.
iThe access data of the mobile phone net-
work provider is set once for the connected
mobile phone.
Online and Internet functions415
COMAND
Z

Explanation of the access data
Input fieldMeaning
Provider:Name of the provider to
be displayed in the list of
mobile phone network
providers. The name can
be freely selected.
The standard entry is
Provider
.
Tel.Number:Access number for estab-
lishing the connection
iThe access number
depends on the mobile
phone used. For GSM/
UMTS mobile phones,
*99***1#
is used as a
standard.
Access
Point:
APN network access point
( Access PointName)
You can obtain this infor-
mation from your mobile
phone network provider.
iEntry is not necessary
for all mobile phone
network providers and
mobile phones.
User ID:The user identification
can be obtained from your
mobile phone network
provider.
iEntry is not necessary
for all mobile phone
network providers.
Password:The password can be
obtained from your
mobile phone network
provider.
iEntry is not necessary
for all mobile phone
network providers.
Input fieldMeaning
DNSAddress:The DNS addresses
(Domain Name Service)
can be negotiated auto-
matically or entered man-
ually. The required infor-
mation can be obtained
from your mobile phone
network provider.
iMost mobile phone
network providers sup-
port the Automatic
function. If you selected
the Manual
option, you
are usually required to
enter a DNS address.
DNS1:
DNS2:
Fields for entering the
DNS server addresses
manually. The address
can be obtained from your
mobile phone network
provider.
Entering access data
XIn the list of access data, confirm the Pro‐
viderinput field by pressingW
(
Ypage 415).
An input menu appears.
XEnter the provider (Ypage 301).
XTo enter the phone number: in the list of
access data, select the Tel. Number:
input field by slidingÆVor turning cVd
416Online and Internet functions
COMAND

Managing access data of the mobile
phone network provider
Overview
The access data of the mobile phone networkprovider can be:
Redited
Rcopied, then edited and accepted for a new
provider name
Rdeleted
iChanges that you make to the access
data of a mobile phone network provider
apply to all mobile phones that use this
access data.
iWhen the Internet connection is active,
you cannot edit or delete the access data of
the currently set mobile phone network
provider.
Editing the access data
XSelect a provider from the list of mobile
phone network providers by turning cVd
the COMAND controller (
Ypage 414).
XSelect the symbol to the right of the entry
by sliding VYthe COMAND controller and
press Wto confirm.
XConfirm Editby pressing W.
The access data is displayed.
XEdit the access data. A description of the
entry can be found under "Manually setting
the access data of the mobile phone net-
work provider" (
Ypage 415). Saving access data under a new provider
name
XSelect a provider from the list of mobile
phone network providers by turning
cVd
the COMAND controller (
Ypage 414).
XSelect the symbol to the right of the entry
by sliding VYthe COMAND controller and
press Wto confirm.
XConfirm Copy Provider Entryby press-
ing W.
The access data is displayed.
XEdit the access data. A description of the
entry can be found under "Making entries"
in the "Manually setting the access data of
the mobile phone network provider" sec-
tion (
Ypage 415).
Deleting the access data of the mobile
phone network provider
XSelect a provider from the list of mobile
phone network providers by turning cVd
the COMAND controller (
Ypage 414).
XSelect the symbol to the right of the entry
by sliding VYthe COMAND controller and
press Wto confirm.
XConfirm Deleteby pressing W.
A prompt appears asking whether you wish
to delete the access data.
XSelect YesorNoand press Wto confirm.
Selecting the length of time for auto-
matic disconnection from the Internet
If a preset time has elapsed during which nei-
ther the online functions nor the Internet have
418Online and Internet functions
COMAND

Selecting the search position
XAfter a search term has been entered and
confirmed, a menu appears.
COMAND searches for available POIs for
the search term entered:
Rnear the current vehicle position
Ralong the calculated route
If a destination has previously been
entered, the function is available.
Rnear the destination
If a destination has previously been
entered, the function is available.
Rnear an address
XAfter selectingNear Destination, enter
an address and confirm.
The search results are displayed.
Example: search results
Using search results
XSelect an entry in the list of search results
by turning cVdthe COMAND controller
and press Wto confirm.
A menu appears.
XTo show the detailed view: confirm
Details
by pressing Wthe COMAND con-
troller.
The address of the selected entry is dis-
played.
XTo use a search result as the destina-
tion: select Navigate to
by turning cVd
the COMAND controller and press Wto
confirm.
You then switch to navigation mode and
can start route calculation (
Ypage 329).
You then switch to navigation mode and
can start route calculation.
iThe search result is stored in the
"Last destinations" memory at the same
time (
Ypage 366). You can take the desti-
nation from this memory and save it per-
manently in the destination memory
(
Ypage 363).
XTo call up a destination: selectCallwith
the COMAND controller and press Wto
confirm.
You then switch to the telephone function
and make the call (
Ypage 389).
You then switch to the telephone function
and make the call.
iIf there is no phone number available, the
menu item cannot be selected.
Online and Internet functions421
COMAND
Z

XTo import a destination:selectImport
with the COMAND controller and press W
to confirm.
You can choose whether you want to save
the POI as a personal POI on the SD mem-
ory card or in the address book.
iIf there is no SD memory card in the slot,
the Save As Personal POI
menu item
cannot be selected.
XInsert the SD memory card (Ypage 447).
XTo save as a personal POI: confirmSave
As Personal POIby pressing Wthe
COMAND controller.
The entry is saved as a personal POI on the
SD memory card.
iYou can use a personal POI in navigation
mode for route calculation (
Ypage 344).
If the personal POI is saved on the SD mem-
ory, you can also use it for route calculation
in another vehicle.
XTo save to the address book: select
Save to Address Book
by turning cVd
the COMAND controller and press Wto
confirm.
The entry is stored in the address book.
Popular searches
This function allows you to search using pre-
defined search criteria.
XBring Popular Searchesin the Local
Search menu to the front by turning cVd(the COMAND controller and press
Wto
confirm.
A menu displays the available search crite-
ria.
Example: popular searches
XSelect the search criteria and press Wto
confirm.
XProceed as described in the "Selecting the
search position" section (
Ypage 421). If
the vehicle is stationary, the search results
can be supplemented manually, e.g. "Hotel
Adler".
Search History
This function offers you the previous search
queries.
XBring Search Historyin the Local search
menu to the front by turning cVdthe
COMAND controller and press Wto con-
firm.
The previous search queries are shown
with the most recent at the top.
422Online and Internet functions
COMAND

You can save up to 20 routes and 50 desti-
nations for your vehicle on the server and dis-
play these in the list. If you send further routes
or destinations to the server, the existing
entries are deleted from the list.
iThe routes/destinations sent from Goo-
gle™ maps to the server are automatically
deleted from there after seven days.
Using destinations
Calling up the menu
XSelect an entry in the list by turning cVd
the COMAND controller and press Wto
confirm.
A menu appears.
Displaying details
XConfirm Detailsin the menu by pressing
W the COMAND controller.
The route or destination is displayed.
XTo call up a POI: confirm the entry by
pressing W.
iYou can use the function if:
Ra mobile phone is connected
(
Ypage 383)
Rthe destination address contains a tele-
phone number
Using as the destination
XSelect Navigatetoin the menu by turning
cVd the COMAND controller and press W
to confirm.
You then switch to navigation mode and
can start route calculation (
Ypage 329).
iA route can only be stored as a personal
POI on an SD memory card or taken directly
for route calculation (
Ypage 424).
Calling up the destination
XSelect Callin the menu by turning cVd
the COMAND controller and press Wto
confirm.
You then switch to the telephone function
and make the call (
Ypage 389). Importing a destination/route
When importing, you can choose whether you
want to save the destination as a personal POI
on an SD memory card or in the address book.
You can only save routes as personal POIs to
an SD memory card, but not in the address
book.
XSelect Importin the menu with the
COMAND controller and press Wto con-
firm.
iIf there is no SD memory card in the slot,
the As
PersonalPOImenu item is grayed
out.
XInsert the SD memory card (Ypage 447).
XTo save as a personal POI: confirmAs
Personal POIby pressing Wthe
COMAND controller.
The entry is saved as a personal POI on the SD memory card.
iYou can use a personal POI in navigation
mode for route calculation (
Ypage 344).
You can also use a personal POI in another
vehicle for route calculation.
XTo save to the address book: selectTo
Address Bookby turning cVdthe
COMAND controller and press Wto con-
firm.
The entry is stored in the address book.
Deleting a destination/route from the
server
XSelect an entry in the list by turning cVd
the COMAND controller and press Wto
confirm.
XSelect Deleteand press Wto confirm.
A query appears asking whether the desti-
nation or the route should be deleted.
XSelect YesorNoand press Wto confirm.
424Online and Internet functions
COMAND

Internet radio
General notes
A good Internet connection isrequired to
transmit audio data efficiently. To ensure the
best-possible reception, your mobile phone
should beconnected to the vehicle's exterior
antenna via the phone bracket (optional).
Bear inmind that a relatively large volume of
data can betransmitted when using the Inter-
net radio. An average 12 8kbit per second
data transfer rate can transfer 56 MB of data
in one hour.
The data transfer rate of a station is displayed
while receiving data.
Calling up the Internet radio
XSelect the ®icon in the main function bar
by sliding ZVand turning cV dthe
COMAND controller and press Wto con-
firm.
The carousel view appears.
XBring the Internet Radiopanel to the
front by turning cVdthe COMAND con-
troller and press Wto confirm.
The Internet radio menu appears.
Searching for stations
XSelect Searchin the Internet radio menu.
A list with search criteria appears.
XSelect criterion and press Wto confirm.
iFor example as a search criterion, you can
set an Internet radio station that is located
close to your navigation destination.
Connecting to a station
XSearch for a station (Ypage 428).
XSelect ;(play) in the Internet radio
menu and press Wto confirm.
The call is placed.
If the data stream is interrupted, an automatic
attempt is made to re-establish the connec-
tion.
Manually re-establishing a connection
XSelect ;(play) again in the Internet
radio menu and press Wto confirm.
Ending data transfer:
XSelect É(stop) in the Internet radio
menu and press Wto confirm.
or
XChange to another audio source, for exam-
ple Disc
.
If you change to a main function that is not an
audio source, e.g. navigation, the data con-
nection remains on. You can continue listen-
ing to the set station.
Internet
Display restriction
Internet pages cannot be shown while the
vehicle is in motion.
Calling up a website
Calling up the carousel view
428Online and Internet functions
COMAND

XTo call up the entire menu:when the
short menu is displayed, slide VÆthe
COMAND controller downwards.
or
XSelect a free area on the website by sliding
ZVÆ, XVYoraVb the COMAND control-
ler and press Wto confirm.
Open
Opens the website to the selectable item.
XCall up the menu (Ypage 431).
XConfirm Openby pressing Wthe COMAND
controller.
Enter URL
XCall up the menu (Ypage 431).
XSelect Enter URLby turning cVdor slid-
ing ZVÆ the COMAND controller and press
W to confirm.
XEnter a web address (URL) (Ypage 429). Calling up the previous website
XCall up the menu (Ypage 431).
XSelect
Previousby turning cVdor sliding
ZVÆ the COMAND controller and press W
to confirm.
Calling up the next website
XCall up the menu (Ypage 431).
XSelect Nextby turning cVdor sliding ZVÆ
the COMAND controller and press Wto
confirm.
View
You can use this function to:
Rposition a selection window on websites
that are larger than the display
Rselect a window that is already open
XCall up the menu (Ypage 431).
XSelect Viewby turning cVdor sliding ZVÆ
the COMAND controller and press Wto
confirm.
or
XPress the zkey on the number keypad.
iYou cannot use the zkey if a phone
call is being made.
XTo position the selection window: con-
firm Fullscreen
ViewofCurrentPage
by pressing Wthe COMAND controller.
A selection window appears on the web-
site.
XSlide XVY, ZVÆoraVb the COMAND
controller and position the selection win-
dow on the website.
XPress Wthe COMAND controller.
The selected section is enlarged.
XTo display and select open windows:
select Display Open Windows
by turning
cVd or sliding ZVÆthe COMAND control-
ler and press Wto confirm.
The carousel view appears.
XPress Wthe COMAND controller.
The website is displayed.
432Online and Internet functions
COMAND