2016 Lexus ES350 set

5
ES350_QG_OM33B82U_(U)
OverviewInstrument Panel
Windshield wiper and washer switch
P.34Multi-information display P.28
Headlight switch
Turn signal lever
Fog light switch
*
P.31
P.27
Inside lock button P.97
Trunk opener P.102
Hood lock release lever*
Driving position memory switches∗
P.19
See P.8
See P.7
Window lock switch
P.98
Power window switches P.98
Door lock switch P.97
Tire pressure warning re-set switch
P.47
Fuel filler door opener P.101
Tilt and telescopic steering lock release le-

7
ES350_QG_OM33B82U_(U)
OverviewInstrument Panel
Odometer/trip meter and trip meter reset button*
Instrument panel light control switches*
Outside rear view mirror switches P.21
Intuitive parking assistswitch
∗
P.44
BSM (Blind Spot Monitor) main switch
∗
P.45
Automatic High Beam switch∗
P.32

12
ES350_QG_OM33B82U_(U)
Fuel Consumption Screen (if equipped)
nDisplaying the fuel consumption screen
l Trip information
Navigation system screen
Press the “MENU” button on the Remote T ouch, then select “Info” on the “Menu”
screen, and then select “Fuel Consumption”.
If the “Trip Information” screen does not appear, select “Trip Information”.
Resetting the consumption data
Fuel consumption in the past 15
minutes (if equipped)
Current fuel consumption
Average vehicle speed since the
engine was started
Elapsed time since the engine was
started
Cruising range
Fuel consumption information can be displayed on the navigation system screen
or Lexus Display A udio system screen.
1
2
3
4
5
6

14
ES350_QG_OM33B82U_(U)
Keys
nElectronic key
Smart access system with push-button
start ( →P.15, 22)
Wireless remote control ( →P.14)
nMechanical key
To take out the mechanical key, push
the release button and take the key out.
After using the mechanical key, store
it in the electronic key. Carry the
mechanical key together with the
electronic key. If the electronic key
battery is depleted or the entry func-
tion does not operate properly, you
will need the mechanical key.
nWireless remote control
Locks the doors
Unlocks the doors
Opens the windows and moon
roof
*
Opens the trunk
Sounds the alarm
*: This setting must be customized at
your Lexus dealer.
1
2
3
4
5

15
ES350_QG_OM33B82U_(U)
Smart Access System with Push-button Start
nEntering and exiting the vehicle
Grip the driver’s door handle to
unlock the door. Grip the passen-
ger’s door handle to unlock all the
doors.
*
Make sure to touch the sensor on
the back of the handle.
The doors cannot be unlocked for
3 seconds after the doors are
locked.
*: The door unlock settings can be
changed.
Touch the lock sensor (the indenta-
tion on the upper part of the door
handle) to lock all the doors. Check that the door is securely
locked.
n Opening the trunk
Press the button.
If the vehicle is equipped with power
trunk opener and closer, the trunk lid
automatically opens fully.
The following operations can be performed simply by carrying the electronic key
on your person, for example in your pocke t. The driver should always carry the
electronic key.
Fd il i h i 22
1
2
For details on what to do when the electronic key does not operate properly, see
page 108.

16
ES350_QG_OM33B82U_(U)
Theft Deterrent System
nEngine immobilizer system
The indicator light flashes after the
engine switch has been turned off to
indicate that the system is operating.
The indicator light st ops flashing after
the engine switch has been turned to
ACCESSORY or IGNITION ON mode
to indicate that the system has been can-
celed.
n Alarm
The alarm uses light and sound to give an alert when an intrusion is detected.
To set the alarm:
Close the doors, trunk and hood, and lock all the doors. The system will be set auto-
matically after 30 seconds. The indicator light changes from being on to flashing when the system is set.
To deactivate or stop the alarm:
l Unlock the doors or open the trunk.
l Turn the engine switch to ACCESSORY or IGNITION ON mode, or start the engine. (The alarm will be deactivated or stopped after a few seconds.)

19
ES350_QG_OM33B82U_(U)
Driving Position Memory (if equipped)
nDriving position memory
n
Recording procedure
Check that the shift lever is in P.
Turn the engine switch to IGNITION ON mode.
Adjust the driver’s seat, steering wheel, and outside rear view mirrors to the
desired positions.
While pressing the “SET” button, or
within 3 seconds af ter the “SET” button
is pressed, press button “1”, “2” or “3”
until the buzzer sounds. If the selected button has already
been preset, the previously recorded
position will be overwritten.
nRecall procedure
Check that the shift lever is in P.
Turn the engine switch to IGNITION ON mode.
Press one of the buttons for the driving
position you want to recall until the
buzzer sounds.
This feature automatically adjusts the front seats, steering wheel (power adjust-
ment type) and outside rear view mirrors to suit your preferences.
1
2
3
4
1
2
3

22
ES350_QG_OM33B82U_(U)
Engine (Ignition) Switch
nStarting the engine
Check that the parking brake is set.
Check that the shift lever is set in P.
Firmly depress the brake pedal.
will be displayed on the
multi-information display. If it is
not displayed, the engine cannot
be started.
Press the engine switch. The engine will crank until it
starts or for up to 30 seconds,
whichever is less.
Continue depressing the brake
pedal until the engine is com-
pletely started.
The engine can be started from
any engine switch mode.
Performing the following operations wh en carrying the electronic key on your
person starts the engine or changes engine switch modes.
1
2
3
4