2016 Citroen GRAND C4 PICASSO RHD Owner's Manual

199
Under-inflation alertReinitialisation
This is given by fixed illumination of t
his   warning   lamp,   accompanied   by  
a

n   audible   signal   and,   depending   on  
e

quipment,   the   display   of   a   message. It
  is   necessary   to   reinitialise   the   system   every  t
ime   one   or   more   tyre   pressures   are   adjusted,  
a

nd   after   changing   one   or   more   wheels.
F
 
R

educe   speed   immediately,   avoid  
e

xcessive   steering   movements   and   sudden  
b

raking.
F

S

top the vehicle as soon as it is safe
to
 
do
 
so. F
I n the event of a puncture, use the
temporary
  puncture   repair   kit   or   the   spare  
w

heel   (depending   on   equipment),
or
F
 
i
f   you   have   a   compressor,   such   as   the   one  
i

n   the   temporary   puncture   repair   kit,   check  
t

he   pressures   of   the   four   tyres   when   cold,
or
F
 
i
f   it   is   not   possible   to   make   this   check  
i

mmediately,   drive   carefully   at   reduced  
s

peed.
The
  loss   of   pressure   detected   does   not  
a

lways   cause   visible   bulging   of   the   tyre.  
D

o
 
not   satisfy   yourself   with   just   a   visual  
c

heck. The
  alert   is   maintained   until   the   system  
i

s
 r
einitialised.
Snow chains
The system does not have to be reinitialised   after   fitting   or   removing  
sn

ow
 c
hains.
Before
  reinitialising   the   system,   ensure  
t

hat the pressures of the four tyres are
correct   for   the   use   of   the   vehicle   and   in  
l

ine   with   the   recommendations   on   the  
t

yre   pressure   label.
The   under-inflation   alert   can   only  
b

e   relied   on   if   the   reinitialisation   of  
t

he   system   has   been   done   with   the  
p

ressures in the four tyres correctly
adjusted.
The   under-inflation   detection   system  
d

oes   not   give   a   warning   if   a   pressure   is  
i

ncorrect   at   the   time   of   reinitialisation.
4
Driving

200
Reinitialisation of the system is done in the touch   screen   tablet,   with   the   ignition   on   and   the  
v

ehicle   stationary.
F

I
n the Driving
 
menu,   select   the   "Driving
assistance "
  tab   then   "Under-inflation  
i

nitialisation".
F
 
C
onfirm   the   instruction   by   pressing   "Ye s ",
an
  audible   signal   and   a   message   confirm  
th

e
 r
einitialisation.
The
  new   pressure   settings   registered   are  
c

onsidered   to   be   reference   values   by   the  
s

ystem.
Operating fault
The flashing and then fixed illumination of the u nder-inflation w arning lam p a ccompanied b

y   illumination   of   the   Service   warning   lamp  
i

ndicates   a   fault   with   the   system.
A
  message   appears,   accompanied   by   an  
a

udible
 s
ignal.
Before
  doing   anything   to   the   system,  
t

he   pressures   of   the   four   tyres   must   be  
c

hecked   and   the   system   reinitialised.
The
 
under-inflation
 
alert
 
can
 
only
 
be
 
r

elied
 
on
 
if
 
reinitialisation
 
of
 
the
 
system
 
i

s
 
done
 
with
 
the
 
four
 
tyre
 
pressures
 
c

orrectly
 
set. In
  this   case,   under-inflation   monitoring   of   the  
t

yres   is   no   longer   assured.
Have
  the   system   checked   by   a   CITROËN  
d

ealer   or   a   qualified   workshop.
Driving

201
Mirrors
Adjustment
F Move control A  to   the   right   or   to   the   left   to  s
elect   the   corresponding   mirror.
F

M
ove control B   in   all   four   directions   to  
adj

ust.
F

R
eturn control A   to   the   central   position.
Each
 
fitted
 
with
 
an
 
adjustable
 
mirror
 
glass
 
p

roviding
 
the
 
lateral
 
rear ward
 
vision
 
necessary
 
f

or
 
overtaking
 
or
 
parking.
They
 
can
 
also
 
be
 
folded
 
for
 
parking
 
in
 
confined
 
spa

ces.
Demisting - Defrosting
Door mirrors
Demisting-defrosting of the door m irrors   operates   with   the   engine  
r

unning,   by   switching   on   the   heated  
re

ar
 sc
reen. As
  a   safety   measure,   the   mirrors   should  b
e   adjusted   to   reduce   the   "blind   spots".
The
  objects   observed   are,   in   reality,  
c

loser   than   they   appear.
Take
  this   into   account   in   order   to  
c

orrectly   judge   the   distance   of   vehicles  
a

pproaching   from   behind.
Folding
F From  outside:   lock   the   vehicle   using   the  e
lectronic   key   or   the   Keyless   Entry   and  
S

tarting   system.
F
 
F
rom   inside:   with   the   ignition   on,   pull   the  
c

ontrol A   in   the   central   position   rear wards.
If
  the   mirrors   are   folded   using   control   A,
they
  will   not   unfold   when   the   vehicle   is  
u

nlocked.   Pull   again   on   control   A.
The
  folding   and   unfolding   of   the   door  
m

irrors   using   the   remote   control   can   be  
d

eactivated   by   a   CITROËN   dealer   or   a  
q

ualified
 w
orkshop.
F
 
F
rom   outside:   unlock   the   vehicle   using   the  
e

lectronic   key   or   the   Keyless   Entry   and  
S

tarting   system.
F
 
F
rom   inside:   with   the   ignition   on,   pull   the  
c

ontrol A   in   the   central   position   rear wards.
Unfolding
If necessary, it is possible to fold the mirrors m anually.
For
 
more
 
information
 
on
 
Demisting -
Defrosting the rear screen , refer to the
corresponding
 s

ection.
5
Lighting and visibility

202
Rear view mirror
Equipped with an anti-dazzle system, which darkens the mirror glass and reduces the nuisance to the   driver   caused   by   the   sun,   headlamps   from   other   vehicles...
Manual model
Adjustment
F A djust   the   mirror   so   that   the   glass   is  
d

irected   correctly   in   the   "day"   position.
In
  order   to   ensure   optimum   visibility  
d

uring   your   manoeuvres,   the   mirror  
l

ightens   automatically   when   reverse  
g

ear
 i
s
 enga
ged.
Day / night position
F
 
P
ull   the   lever   to   change   to   the   "night"   anti-
dazzle
  position.
F
 
P
ush   the   lever   to   change   to   the   normal  
"

day"   position.
Automatic "electrochrome"
model
This system automatically and progressively changes   between   the   day   and   night   uses   by  
m

eans   of   a   sensor,   which   measures   the   light  
f

rom   the   rear   of   the   vehicle.
Automatic tilting in reverse gear
With the engine running, on engaging reverse gear,   the   mirror   glasses   tilt   downwards.
They
  return   to   their   initial   position:
-
 
a few seconds a fter c oming o ut o f r everse g ear,- once  the   speed   of   the   vehicle   exceeds  6 m
ph   (10   km/h),
-
 
o
n   switching   off   the   engine.
System
  which   provides   a   view   of   the   ground  
d

uring   parking   manoeuvres   in   reverse   gear.
This   function   can   be   deactivated   in   the   Driving
menu.
F

Sel
ect the " Setting" tab then " Comfort"
and
  "Auto mirror dipping in reverse".
Lighting and visibility

203
Child surveillance mirror
A child surveillance mirror is fitted above the rear   view   mirror.   This   allows   you   to   monitor   the  
v

ehicle’s   rear   passengers,   or   it   can   facilitate  
c

onversation   between   the   front   and   rear  
p

assengers   without   the   need   to   move   the   rear  
v

iew   mirror.  
I

t   can   be   folded   away   to   eliminate   dazzle.
5
Lighting and visibility

204
Lighting control stalk
Main lighting
The various front and rear lamps of the vehicle are   designed   to   adapt   the   driver's   visibility  
p

rogressively   according   to   the   climatic  
c

onditions:
-
 
s
idelamps,   to   be   seen,
-
 
d
aytime   running   lamps   to   be   more   visible  
d

uring   the   day,
-
 
d
ipped   beam   headlamps   to   see   without  
d

azzling
 o
ther
 d
rivers,
-
 
m
ain   beam   headlamps   to   see   clearly   when  
t

he   road   is   clear.
Additional lighting
Other lamps are provided to meet the requirements   of   particular   driving   conditions:
-
 r

ear
 fo
glamps,
-
 
f
ront   foglamps   with   cornering   lighting,
-
 
d
irectional   headlamps   for   improved  
v

isibility
 w
hen
 c
ornering,
-
 
g
uide-me-home   and   welcome   lighting   to  
f

acilitate access to the vehicle,
-
 
p
arking   lamps   as   vehicle   position   markers.
Programming
The setting of some functions can be adjusted:
-  a utomatic   illumination   of   headlamps,
-
 
a
utomatic   headlamp   dipping,
-
 
g
uide-me-home   lighting,
-
 
w
elcome   lighting,
-
 
c
ornering   lighting,
-
 d

irectional
 l
ighting.
In
 
some
 
weather
 
conditions
 
(e.g.
 
low
 
t

emperature
 
or
 
humidity),
 
the
 
presence
 
o

f
 
misting
 
on
 
the
 
internal
 
sur face
 
of
 
the
 
g

lass
 
of
 
the
 
headlamps
 
and
 
rear
 
lamps
 
i

s
 
normal;
 
it
 
disappears
 
after
 
the
 
lamps
 
h

ave
 
been
 
on
 
for
 
a
 
few
 
minutes.
Travelling abroad
Halogen headlamps
For   motoring   in   countries   that   drive  
o

n   the   other   side   of   the   road,   it   is  
n

ecessary   to   adapt   the   adjustment   of  
t

he   dipped   beams   so   as   to   not   dazzle  
t

he   drivers   of   approaching   vehicles.  
C

ontact   a   CITROËN   dealer   or   qualified  
w

orkshop.
Xenon headlamps
The
  design   of   the   dipped   beam  
h

eadlamps   allows   you   to   drive   in   a  
c

ountry   that   drives   on   the   other   side  
o

f   the   road,   without   the   need   for   any  
m

odification.
In
 
the
 
event
 
of
 
the
 
failure
 
of
 
one
 
or
 
more
 
b

ulbs,
 
a
 
message
 
advises
 
you
 
to
 
check
 
t

he
 
lamp(s)
 
in
 
question.
Selection
 
and
 
control
 
of
 
the
 
various
 
front
 
and
 
rear
 
lamps
 
providing
 
the
 
vehicle's
 
lighting.
Lighting and visibility

205
Displays
Illumination of the corresponding indicator lamp   in   the   instrument   panel   confirms   that   the  
l

ighting   selected   is   on.
The
  rear   sidelamps   and   direction  
i

ndicators   are   located   on   the   tailgate.  
W

hen   they   are   on,   opening   the   tailgate  
a

utomatically   transfers   illumination   to  
t

he   lamps   located   in   the   rear   bumper,   to  
m

aintain   the   safety   of   the   vehicle.
Main lighting
Lighting off (ignition off) /Daytime running lamps (engine running).
Automatic illumination of headlamps.
D aytime   running   lamps   /   Dipped  
b

eam   /   Main   beam.
Sidelamps.
Dipped
  or   main   beam   headlamps.
Turn
 
the
 
ring   A   to   place   the   desired   symbol  
a

gainst
 
the   mark.
Selection of main lighting mode
Model without AUTO lighting
Model with AUTO lighting Headlamp dipping
Pull the stalk B towards you to switch the l
ighting   between   dipped   and   main   beam  
h

eadlamps   or   to   activate   automatic   headlamp  
d

ipping.
In
  the   lighting   off   and   sidelamps   modes,   the  
d

river   can   switch   on   the   main   beam   headlamps  
t

emporarily   ("headlamp   flash")   by   maintaining   a  
p

ull   on   the   stalk.
5
Lighting and visibility

206
Model with rear foglamps only
Rear foglamps
Rotate
 
and   release   the   ring   C:
F
 
f

or wards   a   first   time   to   switch   on   the   front  
fo

glamps,
F
 
f

or wards   a   second   time   to   switch   on   the  
r

ear
 fo
glamps,
F
 
r

ear wards   a   first   time   to   switch   off   the   rear  
fo

glamps,
F
 
r

ear wards   a   second   time   to   switch   off   the  
f

ront
 
fog   lamps.
Model with front and rear
foglamps Foglamps
F To
  switch   on   the   foglamps,   turn   the   ring   C
forwards.
Front
  and   rear   foglamps
F
 
T
o   switch   off   the   foglamps,   turn   the   ring   C
rearwards. When
  the   headlamps   switch   off   with   automatic  
i

llumination   of   headlamps   or   when   the   dipped  
b

eam   headlamps   are   switched   off   manually,  
t

he   foglamps   and   sidelamps   remain   on.
F  
T
urn   the   ring   rear wards   to   switch   off  t
he   foglamps,   the   sidelamps   will   then  s
witch off.
When
  switching   off   dipped   beam  
m

anually,   the   rear   foglamps   also   go   off.
The
  foglamps   operate   with   the   dipped   and   main  
b

eam
 h
eadlamps.
Lighting and visibility