2016 Citroen GRAND C4 PICASSO RHD Owner's Manual

71
OFF
Locking the vehicle with exterior perimeter
monitoring only
Deactivate the interior volumetric monitoring to   avoid   unwanted   triggering   of   the   alarm   in  
c

ertain   cases   such   as:
-
 
l
eaving   a   window   partially   open,
-
 
w
ashing   your   vehicle,
-
 
c
hanging   a   wheel,
-
 
t
owing   your   vehicle,
-
 
t
ransport   on   a   ferry.
Deactivating the volumetric
monitoring
F Switch  off   the   ignition   and   within  t
en   seconds   press   this   button  
u

ntil   its   indicator   lamp   is   on   fixed.
F
 
G

et
 
out   of   the   vehicle.
F
 
I

mmediately   lock   the   vehicle   using   the  
r

emote   control   or   the   "Keyless   Entry   and  
S

tarting"   system.
Only
 
the
 
exterior   perimeter   protection   system   is  
a

ctive:
 
the   indicator   lamp   in   the   button   flashes  
o

nce
 
per
 
second.
To
 
be
 
effective,   this   deactivation   must   be   done  
e

very
 
time   the   ignition   is   switched   off.
In
 
the
 
case
 
of
 
automatic
 
locking
 
of
 
the
 
v

ehicle
 
(which
 
occurs
 
after
 
a
 
period
 
o

f
 
30
 
seconds
 
if
 
a
 
door
 
or
 
the
 
boot
 
is
 
n

ot
 
opened),
 
the
 
monitoring
 
system
 
is
 
r

eactivated
 a

utomatically.
Deactivation
F Press   one   of   the   unlocking   buttons   on   the  r
emote   control:
short press
long
  press
or
F
 
U
nlock   the   vehicle   using   the   "Keyless   Entry  
a

nd   Starting"   system.
The
  monitoring   system   is   deactivated:   the  
i

ndicator   lamp   in   the   button   is   off   and   the  
d

irection   indicators   flash   for   about   2   seconds.
Reactivating the interior
volumetric monitoring
F Deactivate  the   exterior   perimeter  m
onitoring   by   unlocking   the   vehicle   using  
t

he   remote   control   or   the   Keyless   Entry   and  
S

tarting   system.
The
  indicator   lamp   in   the   button   goes   off.
F
 
R
eactivate   the   full   alarm   system   by   locking  
t

he   vehicle   using   the   remote   control   or   the  
"

Keyless   Entry   and   Starting"   system.
The
  indicator   lamp   in   the   button   flashes   once  
p

er   second   again.
2
Access

72
Triggering of the alarm
This is indicated by sounding of the siren and   flashing   of   the   direction   indicators   for  
t

hirty seconds.
The
  monitoring   functions   remain   active   until  
t

he   alarm   has   been   triggered   eleven   times   in  
s

uccession.
When
  the   vehicle   is   unlocked   using   the   remote  
c

ontrol   or   the   Keyless   Entry   and   Starting  
s

ystem,   rapid   flashing   of   the   indicator   lamp  
i

n   the   button   informs   you   that   the   alarm   was  
t

riggered   during   your   absence.   When   the  
i

gnition   is   switched   on,   this   flashing   stops  
i

mmediately.
Failure of the remote control
To deactivate the monitoring functions:
F  
U
nlock   the   vehicle   using   the   key   (integral  
w

ith   the   remote   control)   in   the   driver's   door  
l

ock.
F
 
O
pen   the   door;   the   alarm   is   triggered.
F
 
S
witch   on   the   ignition;   the   alarm   stops.   The  
i

ndicator   lamp   in   the   button   goes   off.
Locking the vehicle without
activating the alarm
F Lock  or   deadlock   the   vehicle   using   the   key  (
integral   with   the   remote   control)   in   the  
d

river's   door   lock.
Operating fault
When the ignition is switched on, fixed illumination   of   the   indicator   lamp   in   the   button  
i

ndicates   a   fault   in   the   system.
Have
  it   checked   by   a   CITROËN   dealer   or   a  
q

ualified
 w
orkshop.
Automatic activation*
2 minutes after the last door or the boot is closed,   the   system   is   activated   automatically.
F
 
T
o   avoid   triggering   the   alarm   on   entering  
t

he   vehicle,   first   press   the   unlocking   button  
o

n   the   remote   control   or   unlock   the   vehicle  
u

sing   the   Keyless   Entry   and   Starting  
s

ystem.
*
  Depending   on   the   country   of   sale.
Access

73
Electric windows
Manual operation
To open or close the window, press or pull the switch   gently.   The   window   stops   as   soon   as   the  
s

witch   is   released.
To
  open   or   close   the   window,   press   or   pull  
t

he   switch   fully:   the   window   opens   or   closes  
c

ompletely   when   the   switch   is   released.  
P

ressing   the   switch   again   stops   the   movement  
o

f   the   window.
1.
 L

eft-hand
 
front.
2.
 R

ight-hand
 
front.
3.
 R

ight-hand
 r

ear.
4.
 L

eft-hand
 r

ear.
5.
 D

eactivate
 
the
 
electric
 
window
 
switches
 
l

ocated
 
at
 
the
 
rear
 
seats.
Automatic operation Safety anti-pinch
When the window rises and meets an obstacle, i
t   stops   and   immediately   partially   lowers   again.
In
  the   event   of   unwanted   opening   of   the  
w

indow   on   closing,   press   the   switch   until   the  
w

indow   opens   completely,   then   pull   the   switch  
i

mmediately   until   the   window   closes.   Continue  
t

o  
h
old  
t
he  
s
witch  
f
or  
a
pproximately  
o
ne  
s
econd  
a

fter   the   window   has   closed.
The
  safety   anti-pinch   function   is   not   active  
d

uring   this   operation.
The
 
electric
 
window
 
switches
 
remain
 
o

perational
 
for
 
approximately
 
45
 
seconds
 
after
 
s

witching
 
off
 
the
 
ignition.
Once
 
this
 
time
 
has
 
elapsed,
 
the
 
electric
 
w

indows
 
will
 
not
 
operate.
 
To
 
reactivate
 
them,
 
s

witch
 
the
 
ignition
 
on
 
again.
2
Access

74
Reinitialising the electric
windows
Deactivating the rear
controls for the rear
windows
In the event of contact during operation o
f   the   windows,   you   must   reverse   the  
m

ovement   of   the   window.   To   do   this,  
p

ress   the   switch   concerned.
When
  operating   the   passenger   electric  
w

indow   switches,   the   driver   must  
e

nsure   that   nothing   is   preventing  
c

orrect   closing   of   the   windows.
The
  driver   must   ensure   that   the  
p

assengers   use   the   electric   windows  
c

o r r e c t l y.
Be
  particularly   aware   of   children   when  
o

perating
 t
he
 w
indows.
Be
  aware   of   passengers   or   other  
p

ersons   present   when   closing   the  
w

indows   using   the   electronic   key   or   the  
"

Keyless   Entry   and   Starting"   system.
Following
 
reconnection
 
of
 
the
 
battery,
 
the
 s
afety
 
anti-pinch
 
function
 
must
 
be
 
reinitialised.
The
 
safety
 
anti-pinch
 
function
 
is
 
not
 
active
 
d

uring
 
these
 
operations.
For
 
the
 
safety
 
of
 
your
 
children,
 
press
 
s

witch 5 to prevent operation of the
rear
 
windows
 
irrespective
 
of
 
their
 
p

ositions.
The
 
indicator
 
lamp
 
in
 
the
 
button
 
comes
 
on,
 
a

ccompanied
 
by
 
a
 
message
 
confirming
 
a

ctivation.
 
It
 
remains
 
on,
 
as
 
long
 
as
 
the
 
child
 
l

ock
 
is
 
off
 
(deactivated).
Use
 
of
 
the
 
rear
 
electric
 
windows
 
from
 
the
 
d

river's
 
controls
 
remains
 
possible. For
 
each
 
window:
-
 
l

ower
 
the
 
window
 
completely,
 
then
 
raise
 
it,
 
i

t
 
will
 
rise
 
in
 
steps
 
of
 
a
 
few
 
centimetres
 
with
 
e

ach
 
action.
 
Repeat
 
the
 
operation
 
until
 
the
 
w

indow
 
closes
 
completely,
-
 
c

ontinue
 
to
 
pull
 
the
 
switch
 
for
 
at
 
least
 
o

ne second
 
after
 
reaching
 
this
 
position,
 
w

indow
 c

losed.
Access

75
Front seats
Manual adjustments
Forwards-backwards
F Raise  the   control   bar   and   slide   the   seat  f
or wards   or   backwards.
When
  the   seat   is   in   the   desired   position,   push  
i

t   for wards   and   backwards   without   raising   the  
c

ontrol   bar   to   check   that   it   has   latched.
Driver's seat backrest angle
F Turn  the   knob   to   adjust   the   seat   backrest.
As
 
a
 
safety
 
measure,
 
seat
 
adjustments
 
should   only   be   done   when   stationary.
Driver's seat height
F Pull
  the   control   upwards   to   raise   or   push  i
t   downwards   to   lower,   as   many   times   as  
n

ecessary,   to   obtain   the   desired   position.
Seat
 
consisting
 
of
 
a
 
seat
 
cushion,
 
a
 
seat
 
backrest
 
and
 
a
 
head
 
restraint
 
which
 
can
 
all
 
be
 
adjusted
 
to
 
adapt   your   position   for   ease   of   driving   and   comfort.
Before
 
moving
 
the
 
seat
 
backwards,
 
ensure
 
that
 
there
 
is
 
nothing
 
that
 
might
 
prevent
 
the
 
full
 
travel
 
of   the   seat,   so   as   to   avoid   the   risk   of   jamming  
t

he
 
seat
 
caused
 
by
 
the
 
presence
 
of
 
objects
 
on
 
the
 
floor
 
behind
 
the
 
seat
 
or
 
rear
 
passengers.
 
If
 
the
  seat   jams,   stop   the   movement   immediately.
3
Ease of use and comfort

76
Passenger's seat backrest angle
F Pull  the   control   upwards   or   turn   the   knob   to  a
djust   the   backrest.
When
  the   backrest   is   at   the   desired   angle,  
r

elease   the   control.
Table position for the
passenger's seat backrest
This position, associated with the position of the   rear   seats,   allows   you   to   carry   long   objects  
i

nside   the   vehicle.
When the backrest is at the desired angle, release   the   control   lever.   To   ensure   that   the  
b

ackrest   does   not   suddenly   fold   for wards  
a

nd   hurt   you,   restrain   it   with   your   back   or  
y

our   hand   while   operating   the   control.
Check that there is no object that could inter fere   with   the   movement   of   the   seat,  
b

oth   above   and   below.
F
 
P

lace   the   head   restraint   in   the   low   position,  
r

aise   the   armrest   and   fold   the   fixed   table  
o

nto   the   back   of   the   seat.
F
 
P

ull   the   control   fully   up   and   tip   the   backrest  
fo

rwards.
To
 
return   to   the   normal   position,   guide   the  
b

ackrest   backwards   until   it   locks.
Ease of use and comfort

77
Front seats
Electric adjustments
Forwards-backwards
(driver's seat)
F Push  the   control   for wards   or   rear wards   to  s
lide   the   seat.
Seat backrest angle
F Tilt  the   control   for wards   or   rear wards   to  a
djust   the   angle   of   the   seat   backrest.
Seat cushion height and angle
F Operate the rear part of the control upwards   or   downwards   to   obtain   the  
de

sired
 h
eight.
F

O
perate the front part of the control
upwards
  or   downwards   to   obtain   the  
de

sired
 a
ngle.
To avoid discharging the battery, carry out these   adjustments   with   the   engine   running.
Before moving the seat backwards, ensure that there is nothing that might prevent the full travel of the seat, so as to avoid the risk of jamming the   seat   caused   by   the   presence   of   objects   on   the   floor   behind   the   seat   or   rear   passengers.   If   the   seat   jams,   stop   the   movement   immediately.
3
Ease of use and comfort

78
System which registers the electrical settings of   the   driver's   seat   and   door   mirrors.   It   enables  
y

ou   to   store   and   recall   two   positions   using   the  
b

uttons   on   the   side   of   the   driver's   seat.
Storing driving positions
Storing a position
Using buttons M / 1 / 2
F Switch  on   the   ignition.
F  A djust   your   seat   and   the   door   mirrors.
F

P
ress button M , then press button 1 or 2
within
  four   seconds.
An
  audible   signal   indicates   that  
t
he   position   has  
b

een   stored.
Storing
  a   new   position   cancels   the   previous  
p

osition.
Recalling a stored position
Ignition on or engine running
F Press button 1 or 2 to recall the corresponding p osition.
An
  audible   signal   confirms   that   adjustment   is  
c

omplete.
You
  can   interrupt   the   current   movement   by  
p

ressing   button   M, 1 or 2
  or   by   using   one   of   the  
s

eat   controls.
A
  stored   position   cannot   be   recalled   while  
d

riving.
Recalling
  stored   positions   is   deactivated  
4

5 seconds   after   switching   off   the   ignition.
Ease of use and comfort