183
C4-Picasso-II_en_Chap04_conduite_ed01-2016
The alert is given by a warning lamp which comes on in the door mirror on the side in
question as soon as a vehicle - car, lorry,
bicycle
- is detected and the following
c
onditions are fulfilled:
-
a
ll vehicles are moving in the same
d
irection and in adjacent lanes,
-
t
he speed of your vehicle is between 7 and
87
mph (12 and 140 km/h),
-
y
ou overtake a vehicle with a speed
d
ifference of less than 6 mph (10 km/h),
-
a
vehicle overtakes you with a speed
d
ifference of less than 15 mph (25 km/h),
-
t
he traffic is flowing normally,
-
i
n the case of an overtaking manoeuvre,
i
f this is prolonged and the vehicle being
ov
ertaken remains in the blind spot,
-
y
ou are driving on a straight or slightly
c
urved road,
-
y
our vehicle is not pulling a trailer, a
c
aravan... No
alert will be given in the following situations:
-
i
n the presence of non-moving objects
(
parked vehicles, barriers, street lamps,
r
oad
s
igns...),
-
w
ith vehicles moving in the opposite
d
irection,
-
d
riving on a winding road or a sharp corner,
Operation
- when overtaking (or being overtaken by) a v
ery long vehicle (lorry, coach...) which is
a
t the same time detected at the rear in the
blind
spot angle and present in the driver's
f
orward field of vision,
-
i
n very heavy traffic: vehicles detected in
f
ront and behind are confused with a lorry
or
a stationary object,
-
w
hen overtaking quickly.
4
Driving
186
C4-Picasso-II_en_Chap04_conduite_ed01-2016
Fatigue detection system
Depending on version, the "Driving time warning system" may be combined with the
"
Fatigue detection system".
Using
a camera placed at the top of the
w
indscreen, the system assesses the driver's
l
evel of vigilance by identifying variations in
t
rajectory compared to the lane markings.
This system is particularly suited to fast roads
(speed
higher than 40 mph (65 km/h)).Once the system considers that the behaviour
of
the vehicle suggests a certain level of fatigue
o
r inattention by the driver, it triggers the first
l
evel of alert.
The
driver is then alerted by the message
"Ta
k e c a r e !", accompanied by an audible
signal.
After
three first level alerts, the system triggers
a
new alert with the message "Take a break! ",
accompanied by a more pronounced audible
signal. In
certain driving conditions (poor road
s
ur face or strong winds), the system
m
ay give alerts independent of the
d
river's level of vigilance.
The following situations may inter fere
w
ith operation of the system or prevent
it working:
-
p
oor visibility (inadequate lighting
o
f the roadway, falling snow, heavy
r
ain, dense fog, ...),
- d azzle (headlamps of an oncoming v
ehicle, low sun, reflections on
a
damp road, leaving a tunnel,
a
lternating shade and light, ...),
-
w
indscreen area located in front
of
the camera: dirty, misted, frost-
covered,
snow-covered, damaged
o
r covered by a sticker,
-
l
ane markings absent, worn,
m
asked (snow, mud) or multiple
(
roadworks,
...
),
-
c
lose to the vehicle ahead (lane
markings
not detected),
-
r
oads that are narrow, winding, ...
Driving
204
C4-Picasso-II_en_Chap05_eclairage-visibilite_ed01-2016
Rear view mirror
Equipped with an anti-dazzle system, which darkens the mirror glass and reduces the nuisance to the driver caused by the sun, headlamps from other vehicles...
Manual model
Adjustment
F A djust the mirror so that the glass is
d
irected correctly in the "day" position.
In order to ensure optimum visibility
during
your manoeuvres, the mirror
l
ightens automatically when reverse
g
ear
i
s
enga
ged.
Day / night position
F
P
ull the lever to change to the "night" anti-
dazzle
position.
F
P
ush the lever to change to the normal
"
day" position.
Automatic "electrochrome"
model
This system automatically and progressively changes between the day and night uses by
m
eans of a sensor, which measures the light
f
rom the rear of the vehicle.
Automatic tilting in reverse gear
With the engine running, on engaging reverse gear, the mirror glasses tilt downwards.
They
return to their initial position:
-
a few seconds a fter c oming o ut o f r everse g ear,- once the speed of the vehicle exceeds 6 m
ph (10 km/h),
-
o
n switching off the engine.
System
which provides a view of the ground
d
uring parking manoeuvres in reverse gear.
This function can be deactivated in the Driving
menu.
F
Sel
ect the " Setting" tab then " Comfort"
and " Auto mirror dipping in reverse".
Lighting and visibility
206
C4-Picasso-II_en_Chap05_eclairage-visibilite_ed01-2016
Lighting control stalk
Main lighting
The various front and rear lamps of the vehicle
are designed to adapt the driver's visibility
p
rogressively according to the climatic
c
onditions:
-
s
idelamps, to be seen,
-
d
aytime running lamps to be more visible
d
uring the day,
-
d
ipped beam headlamps to see without
dazzling
o
ther
d
rivers,
-
m
ain beam headlamps to see clearly when
the
road is clear.
Additional lighting
Other lamps are provided to meet the
requirements of particular driving conditions:
-
r
ear
fo
glamps,
-
f
ront foglamps with cornering lighting,
-
d
irectional headlamps for improved
visibility
w
hen
c
ornering,
-
g
uide-me-home and welcome lighting to
f
acilitate access to the vehicle,
-
p
arking lamps as vehicle position markers.
Programming
The setting of some functions can be adjusted:
- a utomatic illumination of headlamps,
-
a
utomatic headlamp dipping,
-
g
uide-me-home lighting,
-
w
elcome lighting,
-
c
ornering lighting,
-
d
irectional
l
ighting.
In
some
weather
conditions
(e.g.
low
t
emperature or humidity), the presence
of
misting
on
the
internal
sur face
of
the
g
lass
of
the
headlamps
and
rear
lamps
i
s
normal;
it
disappears
after
the
lamps
h
ave
been
on
for
a
few
minutes.
Travelling abroad
Halogen headlamps
For motoring in countries that drive
o
n the other side of the road, it is
necessary
to adapt the adjustment of
t
he dipped beams so as to not dazzle
the
drivers of approaching vehicles.
C
ontact a CITROËN dealer or qualified
workshop.
Xenon headlamps
The
design of the dipped beam
h
eadlamps allows you to drive in a
country that drives on the other side
of the road, without the need for any
modification.
In the event of the failure of one or more
bulbs,
a
message
advises
you
to
check
t
he
lamp(s)
in
question.
Selection
and
control
of
the
various
front
and
rear
lamps
providing
the
vehicle's
lighting.
Lighting and visibility
207
C4-Picasso-II_en_Chap05_eclairage-visibilite_ed01-2016
Displays
Illumination of the corresponding indicator lamp in the instrument panel confirms that the
lighting
selected is on.
The rear sidelamps and direction
indicators
are located on the tailgate.
W
hen they are on, opening the tailgate
a
utomatically transfers illumination to
the lamps located in the rear bumper, to
maintain
the safety of the vehicle.
Main lighting
Lighting off (ignition off) /Daytime running lamps (engine running).
Automatic illumination of headlamps.
D aytime running lamps / Dipped
b
eam / Main beam.
Sidelamps.
Dipped
or main beam headlamps.
Turn
the
ring A to place the desired symbol
against
the mark.
Selection of main lighting mode
Model without AUTO lighting
Model with AUTO lighting Headlamp dipping
Pull the stalk B towards you to switch the
l ighting between dipped and main beam
h
eadlamps or to activate automatic headlamp
dipping.
In
the lighting off and sidelamps modes, the
d
river can switch on the main beam headlamps
temporarily
("headlamp flash") by maintaining a
p
ull on the stalk.
5
Lighting and visibility
208
C4-Picasso-II_en_Chap05_eclairage-visibilite_ed01-2016
Model with rear foglamps only
Rear foglamps
Rotate
and release the ring C:
F
f
or wards a first time to switch on the front
foglamps,
F
f
or wards a second time to switch on the
rear
fo
glamps,
F
r
ear wards a first time to switch off the rear
foglamps,
F
r
ear wards a second time to switch of the
front
fog lamps.
Model with front and rear
foglamps Foglamps
F To
switch on the foglamps, turn the ring C
forwards.
Front
and rear foglamps
F
T
o switch off the foglamps, turn the ring C
rearwards. When the headlamps switch off with automatic
illumination of headlamps or when the dipped
beam headlamps are switched off manually,
the
foglamps and sidelamps remain on.
F
T
urn the ring rear wards to switch off t
he foglamps, the sidelamps will then s
witch off.
When
switching off dipped beam
m
anually, the rear foglamps also go off.
The
foglamps operate with the dipped and main
b
eam
h
eadlamps.
Lighting and visibility
209
C4-Picasso-II_en_Chap05_eclairage-visibilite_ed01-2016
Operation of the rear foglamps is inhibited with the tailgate open.
Opening
the tailgate when these lamps
a
re on causes them and their indicator
lamp
in the instrument panel to go off.
They
do not come back on
a
utomatically when the tailgate is
c
losed: they must be switched on again
u
sing the control stalk. In
good or rainy weather, by both day a
nd night, the front foglamps and the
r
ear foglamps are prohibited. In these
s
ituations, the power of their beams
may
dazzle other drivers. They should
o
nly be used in fog or falling snow.
In these weather conditions, you should
switch
on the foglamps and dipped
b
eam headlamps manually, as the
sunshine sensor may detect sufficient
light.
Do
not forget to switch off the front and
r
ear foglamps when they are no longer
n
ecessary.Switching off the lighting
when switching off the ignition
When the ignition is switched off, all of the lamps switch off immediately, except for the d
ipped beam headlamps if automatic guide-
me-home
lighting is activated.
Switching on the lighting when
switching on the ignition
To reactivate the lighting control stalk, turn the ring A to position "0"
- lighting off, then t
o the position of your choice.
When the driver's door is opened, a temporary audible signal warns you that
t
he vehicle's lighting is on.
They switch off automatically after a period
which depends on the state of charge of the b
attery (entry to energy economy mode).
5
Lighting and visibility
210
C4-Picasso-II_en_Chap05_eclairage-visibilite_ed01-2016
Automatic
When the automatic illumination of headlamps
is activated (lighting control stalk at the
A
UTO position), if the ambient light level is
l
ow, the dipped beam headlamps come on
automatically
when switching off the ignition.
Activation or deactivation of the system, as well
as
the period of operation of the guide-me-
home
lighting is set in the touch screen tablet.
F
I
n the Driving menu, select the " Settings"
tab, then " Lighting" and "Guide-me-home
lighting ".
To
adjust the period of operation, select the
s
ymbol for the " Guide-me-home lighting "
function.
Parking lamps Guide-me-home lighting
Manual
Deactivation
The
manual guide-me-home lighting switches
o
ff automatically after a set time.
The temporary illumination of the dipped beam
headlamps
after the vehicle's ignition has been
s
witched off makes the driver's exit easier
w
hen the light is poor.
Side
markers
for
the
vehicle
by
illumination
of
t
he
sidelamps
on
the
traffic
side
only.
F
D
epending
on
version,
within
one
minute
o
f
switching
off
the
ignition,
operate
the
l
ighting
control
stalk
up
or
down
depending
o
n
the
traffic
side
(for
example:
when
p
arking
on
the
left;
lighting
control
stalk
u
pwards;
the
right
hand
sidelamps
are
on).
This
is
confirmed
by
an
audible
signal
and
i
llumination
of
the
corresponding
direction
i
ndicator
warning
lamp
in
the
instrument
panel.
To
switch
off
the
parking
lamps,
return
the
l
ighting
control
stalk
to
the
central
position. Activation
F
W
ith the ignition off, "flash" the headlamps
u
sing the lighting stalk.
F
A f
urther "headlamp flash" switches the
function off.
Lighting and visibility