2016 Citroen C4 PICASSO check engine

148
C4-Picasso-II_en_Chap04_conduite_ed01-2016
Operating fault
Have it checked by a CITROËN dealer or a qualified w orkshop.
In the event of a fault in STOP mode, the vehicle
may
  stall.
All
  of   the   instrument   panel   warning   lamps   come on.
Depending on version, an alert message may also   be   displayed,   asking   you   to   place   the   gear  
s

elector lever at position N and put your foot on
the
  brake   pedal.
It is then necessary to switch off the ignition and start   the   engine   again   using   the   "START/STOP" b

utton.
In the event of a fault with the system,
this indicator lamp flashes for a few
moments then comes on continuously,
accompanied
  by   a   message.
Opening the bonnet
Before
 
doing
 
anything
 
under
 
the
 
b

onnet, deactivate the Stop & Start
system
 
to
 
avoid
 
the
 
risk
 
of
 
injury
 
related
 
t

o
 
an
 
automatic
 
change
 
to
 
START
 
m

ode.
Driving on flooded roads
Before
 
driving
 
through
 
a
 
flooded
 
road,
 
i

t
 
is
 
strongly
 
recommended
 
that
 
you
 
d

eactivate
 
the
 
Stop
 
&
 
Start
 
system.
For more information on Driving
advice , particularly on flooded roads,
refer
 
to
 
the
 
corresponding
 
section. The Stop & Start system requires a
battery
  of   advanced   technology   and  
sp

ecial
 c
haracteristics.
All
 
work   on   this   type   of   battery   must  
o

nly be done by a CITROËN dealer
or
 
a
  qualified   workshop.
For more information on the
12 V
batter y ,
  refer   to   the   corresponding  
s

ection.
Driving

191
C4-Picasso-II_en_Chap04_conduite_ed01-2016
Operation
Activating the function
With the engine running:
F I n the Driving menu, select the " Driving
assistance " tab, then "Panoramic visual
aid ".
With this menu displayed, select one of the
three
  views:
Deactivating the function
F Accelerate   so   as   to   exceed   18   mph  
(30   km/h).
or
F

I
n the Driving menu, select the " Driving
assistance " tab, then "Panoramic visual
aid ".
F
 
Sel
ect
 "
Camera
 O
ff".
Check
  the   cleanliness   of   the   camera  
l

enses
 r
egularly.
High pressure jet wash
When
  washing   your   vehicle,   direct   the  
l

ance   at   least   30   cm   away   from   the  
c

amera.
"Front
 
camera".
"360°
 
camera".
"Rear
 
camera".
The view selected is displayed in the
instrument
 pan

el.
360 vision
The cameras located in the front and rear
bumpers and under the door mirrors are
activated and a reconstruction of the view from
above  
y
our  
v
ehicle  
i
n  
i
ts  
i
mmediate  
s
urroundings
 i

s   displayed   in   the   instrument   panel.
Opening
  a   door   or   the   tailgate   disturbs  
t

he   360   and   rear   views.
Fitting
  the   very   cold   conditions   screen  
a

ffects   the   image   transmitted   by   the  
f

ront   camera.
The display in the instrument panel
disappears
  above   9   mph   (15   km/h).
The
  image   transmitted   by   the   camera  
c

an   be   slightly   affected   by   the   presence  
o

f   the   very   cold   conditions   screen.
4
Driving

199
C4-Picasso-II_en_Chap04_conduite_ed01-2016
The system is deactivated by pressing the control.
The
  system   is   deactivated   automatically:
-
 
o
n   switching   off   the   ignition,
-
 
i
f   the   engine   stalls,
-

i
f no manoeuvre is started within 5 minutes
of selection of the type of manoeuvre,
-
 
a
fter   a   prolonged   stop   of   the   vehicle   during  
a

manoeuvre,
-
 
i
f   the   road   wheel   anti-slip   regulation   (ASR)  
i

s
 t
riggered,
-
 
i
f   the   speed   of   the   vehicle   exceeds   the  
s

tated limit,
-

w
hen the driver interrupts movement of the
steering
 w

heel,
-

a
fter 4 manoeuvre cycles,
-
 
o
n   opening   the   driver's   door,
-

i
f one of the front wheels encounters an
obstacle.
The
  operation   indicator   lamp   goes   off   in   the  
i

nstrument   panel   and   a   message   is   displayed  
a

ccompanied   by   an   audible   signal.
The
  driver   should   then   take   back   control   of   the  
v

ehicle's
 s
teering.
Deactivation
The system is switched off automatically:
-  w hen   towing   a   trailer,   connected  
e

lectrically,
-
 
i
f   the   driver's   door   is   opened,
-

i
f the speed of the vehicle is above 42 mph
(70
  km/h).
To
  switch   the   system   of   for   a   prolonged   period,  
c

ontact a CITROËN dealer or a qualified
workshop.
Operating faults
In the event of a fault with the power
steering,   this   warning   lamp   flashes   in  
t

he instrument panel, accompanied
by
  a   message.
Contact a CITROËN dealer or a qualified
workshop.
Switching off
If the lateral distance between your
vehicle   and   the   space   is   too   great,   the s

ystem may not be able to measure the
space.
Anything
  projecting   beyond   the   envelope
 o

f the vehicle (a ladder on the roof, for
example)
  is   not   taken   into   account   by   the
 P

ark   Assist   system   during   a   manoeuvre.
In bad weather or in winter, ensure that
the sensors are not covered by road
dirt,
  ice   or   snow.
In the event of a fault, have the system
checked
  by   a   CITROËN   dealer   or   a  
q

ualified
 w
orkshop.
If
 
the
 
system
 
is
 
deactivated
 
during
 
a
 
ma

noeuvre, the drive should reactivate
it
 
to
 
repeat
 
the
 
measurement. In
 
the
 
event
 
of
 
a
 
fault,
 
this
 
warning
 
l

amp flashes for a few seconds,
accompanied
 
by
 
an
 
audible
 
signal.
If
 
the
 
fault
 
occurs
 
during
 
the
 
use
 
o

f
 
the
 
system,
 
the
 
warning
 
lamp
 
g

oes off. High pressure jet washing
When
  washing   your   vehicle,   keep   the  
l

ance   at   least   30   cm   away   from   the  
sen

sors.
4
Driving

227
C4-Picasso-II_en_Chap06_securite_ed01-2016
Anti-slip regulation (ASR)
Activation
This system is activated automatically each
time  the   vehicle   is   started.
It comes into operation in the event of a
problem
  of   grip.
Deactivation
In exceptional conditions (starting a vehicle which   is   bogged   down,   stuck   in   snow,   on   soft  
g

round...),   it   may   be   advisable   to   deactivate  
t

he DSC and ASR, so that the wheels can turn
freely
  and   regain   grip.
This
 
is
 
indicated
 
by
 
the
 
flashing
 
of
 
t

his
 
warning
 
lamp
 
in
 
the
 
instrument
 
pan

el. Reactivate the systems as soon as the level of
grip
  permits.
F

I
n the Driving menu, select the " Driving
assistance " tab, then "Anti-slip
regulation ".
This indicator lamp comes on in the
instrument
 pan

el.
The
  ASR   system   will   no   longer   act  
o

n   the   operation   of   the   engine   and  
o

n   the   brakes   in   the   event   of   an  
i

nvoluntary   change   of   trajectory.
After
 
an
 
impact,
 
have
 
the
 
system
 
checked
 
by
 
a
 C
ITROËN
 
dealer
 
or
 
a
 
qualified
 
workshop.
Operating fault
Reactivation
The system is reactivated automatically every
time
  the   ignition   is   switched   back   on   or   from  
3

0 mph   (50   km/h).
Below
  30   mph   (50   km/h),   you   can   reactivate   it  
m

anually:
F

I
n the Driving menu, select the " Driving
assistance " tab, then "Anti-slip
regulation ".
Illumination
  of   this   warning   lamp,  
a

ccompanied   by   an   audible   signal  
a

nd   a   message,   indicate   a   fault   with  
t

he   system.
Contact a CITROËN dealer or a qualified
workshop
  to   have   the   system   checked.
6
Safety

258
C4-Picasso-II_en_Chap07_info-pratiques_ed01-2016
The petrol or Diesel engine of your vehicle is fitted with a catalytic converter, a device which
helps to reduce the level of harmful emissions
in
  the   exhaust   gases.
For petrol engines, you must use unleaded
fuel.
The
  filler   neck   is   narrower,   allowing   only  
u

nleaded   petrol   nozzles   to   be   introduced.
If you have put in the wrong fuel
for your vehicle, you must have the
fuel tank drained and filled with
the correct fuel before star ting the
engine.
Fuel cut- of f
Your vehicle is equipped with a safety device
which cuts off the fuel supply in the event of a
collision.
Misfuel prevention (Diesel)*
Operation
When a petrol filler nozzle is introduced into the
fuel   filler   neck   of   your   Diesel   vehicle,   it   comes  
i

nto   contact   with   the   flap.   The   system   remains  
c

losed   and   prevents   filling.
Do not persist but introduce a Diesel type
filler nozzle. Mechanical   device   which   prevents   filling   the   tank   of   a   Diesel   vehicle   with   petrol.   It   avoids   the   risk   of  
e

ngine   damage   that   can   result   from   filling   with   the   wrong   fuel.
It remains possible to use a fuel can to
fill   the   tank.
In   order   to   ensure   a   good   flow   of   fuel,  
d

o not place the nozzle of the fuel can
in direct contact with the flap of the
misfuel prevention device and pour
s l ow l y.
Travelling abroad
As Diesel fuel pump nozzles may
be different in other countries, the
presence of the misfuel prevention
device
  may   make   refuelling   impossible.
Before
  travelling   abroad,   we  
r

ecommend   that   you   check   with   the  
C

ITROËN   dealer   network,   whether   your  
v

ehicle is suitable for the fuel pumps in
the
  country   in   which   you   want   to   travel.
* Depending
 
on
 
the
 
country
 
of
 
sale.
Practical information

271
C4-Picasso-II_en_Chap07_info-pratiques_ed01-2016
Bonnet
F Open  the   left   hand   front   door.
F  
L
ift   the   safety   catch   and   raise   the   bonnet.F
 U nclip   the   stay   from   its   housing   and   place  i
t in the support slot to hold the bonnet
open.
Opening
F Pull the release lever, located at the bottom of   the   door   aperture,   towards   you. Before
  doing   anything   under   the  
b

onnet, switch off the Stop & Start
system
  to   avoid   any   risk   of   injury  
r

esulting   from   an   automatic   change   to  
S

TART   mode.
The cooling fan may star t after switching off the engine: take care with ar ticles and
clothing that might be caught by the fan blades. Do not open the bonnet under very
windy
 c

onditions.
The location of the interior bonnet
release   lever   prevents   opening   of   the  
b

onnet when the left hand front door
is   shut.
When   the   engine   is   hot,   handle   the  
e

xterior   safety   catch   and   the   stay   with  
c

are   (risk   of   burns),   using   the   protected  
a

rea.
When   the   bonnet   is   open,   take   care   not  
t

o   damage   the   safety   catch.
Because of the presence of electrical equipment under the bonnet, it is recommended that
exposure   to   water   (rain,   washing,   ...)   be   limited.
Closing
F Take  the   stay   out   of   its   support   slot.
F  C lip   the   stay   back   into   its   housing.
F

L
ower the bonnet and release it at the end
of
  its   travel.
F
 
P
ull   on   the   bonnet   to   check   that   it   has  
l

atched   correctly.
7
Practical information

274
C4-Picasso-II_en_Chap07_info-pratiques_ed01-2016
Checking levels
Take care when working under the bonnet, as certain areas of the engine may be extremely hot (risk of burns) and the cooling fan could start at any   time   (even   with   the   ignition   off).
Engine oil level
The check is carried out either when the   ignition   is   switched   on   using   the  
o

il level indicator in the instrument
panel for vehicles so equipped, or
using
  the   dipstick.Checking using the dipstick
The location of the dipstick is shown in the corresponding   underbonnet   layout   view.
F
 
T
ake   the   dipstick   by   its   coloured   grip   and  
r

emove   it   completely.
F
 
W
ipe   the   end   of   the   dipstick   using   a   clean  
n

on-fluffy   cloth.
F
 
R
efit   the   dipstick   and   push   fully   down,   then  
p

ull   it   out   again   to   make   the   visual   check:  
t

he   correct   level   is   between   the   marks   A
and B .
It is normal to top-up the oil level between
two
 
services
 
(or
 
oil
 
changes).
 
CITROËN
 
r

ecommends
 
that
 
you
 
check
 
the
 
level,
 
and
 
top-
up
 
if
 
necessary,
 
every
 
3
 
000
 
miles
 
(5
 
000
 
kms).
Check
 
all
 
of
 
these
 
levels
 
regularly,
 
in
 
line
 
with
 
the
 
manufacturer's   service   schedule.   Top   them   up   if   necessary,   unless   other wise   indicated.
If
 
a
 
level
 
drops
 
significantly,
 
have
 
the
 
corresponding   system   checked   by   a   CITROËN   dealer   or   a   qualified   workshop.
To
 
ensure
 
that
 
the
 
reading
 
is
 
correct,
 
y

our
 
vehicle
 
must
 
be
 
parked
 
on
 
a
 
level
 
s

ur face
 
with
 
the
 
engine
 
having
 
been
 
off
 
f

or
 
more
 
than
 
30
 
minutes. A = MA X
B = MIN
If you find that the level is above the A
  mark   or  
belo

w the B   mark,   do not star t the engine.
-

I
f the level is above the MAX
 
mark   (risk  
o

f   damage   to   the   engine),   contact   a  
C

ITROËN   dealer   or   a   qualified   workshop.
-

I
f the level is below the MIN
 
mark,   you  
m

ust   top-up   the   engine   oil.
Practical information

275
C4-Picasso-II_en_Chap07_info-pratiques_ed01-2016
The brake fluid level should be close to   the   "MA X"   mark.   If   it   is   not,   check  
t

he   brake   pad   wear.
Brake fluid level
Changing the fluid
Refer to the manufacturer's service schedule for   details   of   the   interval   for   this   operation.
Fluid specification
The brake fluid must conform to the manufacturer's r ecommendations.
Topping-up the engine oil level
The location of the oil filler cap is shown in the
corresponding  underbonnet   layout   view.
F

U
nscrew the oil filler cap to reveal the filler
aperture.
F
 
A
dd   oil   in   small   quantities,   avoiding   any  
s

pills   on   engine   components   (risk   of   fire).
F
 
W
ait   a   few   minutes   before   checking   the  
l

evel   again   using   the   dipstick.
F
 
A
dd   more   oil   if   necessary.
F
 
A
fter   checking   the   level,   carefully   refit   the  
o

il   filler   cap   and   the   dipstick   in   its   tube.
Engine oil change
Refer to the manufacturer's service schedule for   details   of   the   interval   for   this   operation.
In
  order   to   maintain   the   reliability   of   the   engine  
a

nd emission control system, never use
additives
  in   the   engine   oil.
After
  topping-up   the   oil,   the   check   when  
s

witching   on   the   ignition   with   the   oil  
l

evel indicator in the instrument panel
is   not   valid   during   the   30   minutes   after  
t

opping   up.
Oil grade
Before topping-up the oil or changing the oil, c
heck   that   the   oil   is   the   correct   grade   for   your  
e

ngine   and   conforms   to   the   manufacturer's  
r

ecommendations.
7
Practical information