2016 Citroen C4 display

190
C4-2_en_Chap06_conduite_ed02-2015
Maintenance
In the event of a malfunction with the system, the "ECO OFF"   switch   warning   lamp   flashes,  
t

hen   comes   on   continuously.
have
  it   checked   by   a   CITROËN   dealer   or   a  
q

ualified
 w
orkshop.
Operating fault
This system requires the use of a 12 V battery of   specific   technology   and   characteristics  
(

reference   numbers   available   from   a   CITROËN  
d

ealer   or   a   qualified   workshop).
Fitting
  a   battery   not   listed   by   CITROËN would  
i

ntroduces   the   risk   of   faults   with   the   system.
Before
  doing   any   work   under   the  
b

onnet, deactivate the Stop & Start
system   to   avoid   the   risk   of   injury   related  
t

o   an   automatic   change   to   START  
m

ode.
The   Stop   &   Start   system   makes   use   of  
a

n   advanced   technology.   All   work   on  
t

his   type   of   battery   must   only   be   carried  
o

ut   by   a   CITROËN   dealer   or   a   qualified  
w

orkshop.
In
 
the
 
event
 
of
 
a
 
fault
 
in
 
STOP
 
mode,
 
t

he
 
vehicle
 
may
 
stall.
 
All
 
of
 
the
 
i

nstrument
 
panel
 
warning
 
lamps
 
come
 
o

n.
Depending
 
on
 
version,
 
an
 
alert
 
m

essage
 
may
 
also
 
be
 
displayed
 
asking
 
y

ou
 
to
 
put
 
the
 
gear
 
lever
 
into
 
position
 
N
and
 
put
 
your
 
foot
 
on
 
the
 
brake
 
pedal.
It is then necessary to switch off the
ignition,
 
then
 
restart
 
the
 
engine
 
using
 
t

he
 
key
 
or
 
the
 
"START/STOP"
 
button.
Reactivation
The system is reactivated automatically a t   every   new   start   using   the   key   or   the  
"

START/STOP"   button.
Press the "ECO OFF"
  switch   again.
The
 
system   is   active   again;   this   is   confirmed  
b

y
 
the
  switch   warning   lamp   going   off   and   the  
d

isplay   of   a   message.
Driving

193
C4-2_en_Chap06_conduite_ed02-2015
The flashing and then fixed illumination   of   the   under-inflation w

arning   lamp   accompanied   by   the
 i

llumination   of   the   service   warning
 l

amp   indicates   a   fault   with   the   system.
Operating fault
The alert is given by the fixed illumination   of   this   warning   lamp,  
a

ccompanied   by   an   audible   signal,  
a

nd   depending   on   equipment,   the  
d

isplay   of   a   message.
Under-inflation alert
In the event of a problem on one of the tyres, the   symbol   or   the   message   appears,   according  
t

o   equipment,   to   identify   it.
F
 
R
educe   speed,   avoid   sudden   steering  
m

ovements   or   harsh   brake   applications.
F
 
S
top   as   soon   as   it   is   safe   to   do   so. In
  this   case,   monitoring   of   the   tyre   pressures   is  
n

ot   assured.
F  
I
f   you   have   a   compressor   (the   one   in   the  
t

emporary   puncture   repair   kit   for   example),  
c

heck   the   four   tyre   pressures   when   cold.
 I

f   it   is   not   possible   to   check   the   tyre  
p

ressures   at   the   time,   drive   carefully   at  
r

educed
 s
peed.


or
F
I
n the event of a puncture, use the
temporary   puncture   repair   kit   or   the   spare  
w

heel   (according   to   equipment).
Go   to   a   CITROËN   dealer   or   a   qualified  w
orkshop to   have   the   system   checked   or,  
f

ollowing   the   repair   of   a   puncture,   to   have   the  
o

riginal   wheel,   equipped   with   a   sensor,   refitted.
Any
  tyre   repair   or   replacement   on   a   wheel  
f

itted   with   this   system   must   be   carried   out   by   a  
C

ITROËN   dealer   or   a   qualified   workshop.
If
  after   changing   a   tyre,   a   wheel   is   not   detected  
b

y   your   vehicle   (fitting   snow   tyres   for   example),  
y

ou   must   have   the   system   reinitialised   by   a  
C

ITROËN   dealer   or   a   qualified   workshop.
The loss of pressure detected does not
always
  lead   to   visible   deformation   of  
t

he   tyre.
Do
  not   rely   on   just   a   visual   check.This alert is also displayed when one or
more
  wheels   is   not   fitted   with   a   sensor  
(

for   example,   a   space-saver   or   steel  
spar

e
 w
heel).
The   alert   is   maintained   until   the   tyre   or  t
yres concerned is reinflated, repaired
or   replaced.
The
  spare   wheel   (space-saver   type   or   a  
s

teel   rim)   does   not   have   a   sensor.
6
Driving

198
C4-2_en_Chap06_conduite_ed02-2015
6. Speed  limiter   on   /   pause   indication.
7. S peed   limiter   mode   selection   indication.
8.
 P

rogrammed   speed   value.
9.
 S

election   of   a   memorised   speed   setting.
Displays in the instrument panel
Speed limiter
1. Speed  limiter   mode   selection   wheel.
2. P rogrammed   value   decrease   button.
3.
 P

rogrammed   value   increase   button.
4.
 S

peed   limiter   on   /   pause   button.
5.
 D

isplay   memorised   speed   settings   button.
Steering mounted controls
System which prevents the vehicle from exceeding the speed programmed by the driver.
The speed limiter is switched on manually.
The   minimum   programmed   speed   is 2

0 mph   (30   km/h).
The
  programmed   speed   remains   in   the
 s

ystem   memory   when   the   ignition   is
 s

witched   off.
The speed limiter is a driving aid that cannot,   in   any   circumstances,   replace   the n

eed   to   observe   speed   limits   or   the   need
 f

or   vigilance   on   the   part   of   the   driver.
Driving

199
C4-2_en_Chap06_conduite_ed02-2015
Switching on
F If  the   speed   setting   is   suitable   (last   speed  s
etting   programmed   in   the   system)   press  
b

utton 4   to   switch   the   speed   limiter   on.
F

T
urn the wheel 1 to the "LIMIT"
position
to   select   the   speed   limiter;   the   function   is  
pa

used.
F  
P
ressing   button   4   temporarily   interrupts   the  
f

unction
 (
pause).
Adjusting the limit speed
setting
You do not have to switch the speed limiter on in   order   to   set   the   speed. To
  modify   the   limit   speed   setting   from   the  
c

urrent   speed   of   the   vehicle:
F
 
i
n   steps   of   +/-   1   mph   (km/h),   make  
s

uccessive short presses on button 2 or 3,
F
 
c
ontinuously,   in   steps   of   +/-   5   mph   (km/h),  
p

ress and hold button 2 or 3.
To
  modify   the   limit   speed   setting   using  
m

emorised   speeds   and   from   the   touch   screen  
t

ablet:
F

p
ress button 5   to   display   the   six   memorised  
s

peed
 se
ttings,
F

p
ress the button for the desired speed
setting.
This
  setting   becomes   the   new   limit   speed.
To
  modify   the   limit   speed   setting   using  
m

emorised  
s
peeds  
a
nd  
f
rom  
y
our  
A
udio  
s
ystem  
(

only   with   the   monochrome   screen   C):
F
 
w
ith   the   system   first   activated.
For
  more   information   on   memorising   speeds,  
r

efer   to   the   corresponding   section.
F
 
m
ake   a   long   press   on   button   2 or 3, the
system
  displays   the   memorised   speed  
c

losest   to   the   actual   speed   of   the   vehicle;  
t

his   setting   becomes   the   new   limit   speed.
F
 
t
o   choose   another   memorised   speed,   make  
a

nother   long   press   on   button   2 or 3.
6
Driving

200
C4-2_en_Chap06_conduite_ed02-2015
On a steep descent or in the event of
sharp  acceleration,   the   speed   limiter  
w

ill not be able to prevent the vehicle
from
  exceeding   the   programmed   speed. The
  use   of   mats   not   approved   by  
C

ITROËN   may   inter fere   with   the  o
peration   of   the   speed   limiter.
To   avoid   any   risk   of   jamming   of   the  
ped

als:
-
 
e
nsure   that   the   mat   is   positioned  
c

o r r e c t l y,
-
 
d
o   not   fit   one   mat   on   top   of   another.
Temporarily exceeding the
programmed speed
F If  you   want   to   temporarily   exceed   the  p
rogrammed   limit   speed,   press   firmly on
the
  accelerator   pedal,   going   beyond   the  
p

oint of resistance .
The
  speed   limiter   is   deactivated   temporarily  
a

nd   the   displayed   programmed   speed   flashes.
Switching off
When the limit speed is exceeded but is not due to action by the driver, there is an audible
signal
  to   complete   the   alert.
Once the speed of the vehicle returns to
the
  programmed   setting,   the   speed   limiter  
f

unctions   again:   the   display   of   the   programmed  
s

peed   setting   becomes   steady   again.
F

T
urn wheel 1 to the "0"
 
position:   the  
d

isplay   of   information   on   the   speed   limiter  
d

isappears.
Operating fault
Flashing dashes indicate a fault with the speed limiter.
Have
  it   checked   by   a   CITROËN   dealer   or   a  
q

ualified
 w
orkshop.
Driving

201
C4-2_en_Chap06_conduite_ed02-2015
Cruise control
1. Cruise  control   mode   selection   wheel.
2. B utton   for   setting   the   current   speed   of   the  
v

ehicle   as   the   cruise   setting   or   lowering   the  
c

ruise
 se
tting.
3.
 B

utton   for   setting   the   current   speed   of   the  
v

ehicle   as   the   cruise   setting   or   raising   the  
c

ruise
 se
tting.
4.
 C

ruise   control   pause   /   resume   button.
5.
 D

isplay   memorised   speed   settings   button.
Steering mounted controls
6. Cruise  control   pause   /   resume   indication.
7. C ruise   control   mode   selected   indication.
8.
 C

ruise   speed   setting.
9.
 S

electing   a   memorised   cruise   speed.
Displays in the instrument panel
The operation of the cruise control can be
interrupted (pause):
-
 
b
y   pressing   control   4   or   by   pressing   the  
b

rake   or   clutch   pedal,
-
 
a
utomatically,   if   operation   of   the   dynamic  
s

tability   control   system   is   triggered.
Switching
  off   the   ignition   cancels   any  
p

rogrammed   speed   setting.
The cruise control is switched on

manually.
It   requires   a   minimum   vehicle   speed   of  
2

5   mph   (40   km/h)   as   well   as:
-  
w
ith   a   manual   gearbox,   the  
e

ngagement   of   fourth   gear   or  
h

igher,
-  
w
ith   an   automatic   gearbox,   the   gear  
s

elector at position D or second
gear   or   higher   in   manual   mode.
System   which   automatically   maintains   the   cruising   speed   of   the   vehicle   at   a   setting   programmed   by  
t

he   driver,   without   any   action   on   the   accelerator   pedal.
The   cruise   control   system   is   a   driving   aid
 t

hat   cannot,   in   any   circumstances,   replace
 t

he   need   to   observe   speed   limits,   nor   the
 n

eed   for   vigilance   on   the   part   of   the   driver.As
  a   safety   measure,   you   are   advised  
t

o   keep   your   feet   near   the   pedals   at   all  
ti

mes.
6
Driving

202
C4-2_en_Chap06_conduite_ed02-2015
Switching on
F To start the cruise control and set a cruise speed, once the vehicle has reached the
desired speed, press button 2 or 3 :
  the  
c

urrent   speed   of   your   vehicle   becomes   the  
c

ruise   speed   setting.
 Y

ou   can   release   the   accelerator   pedal.
F

T
urn the wheel 1 to the "CRUISE"
position
to   select   cruise   control   mode;   the   function  
i

s   paused. F  
P
ressing   button   4 interrupts operation of
the   system   (pause).
Take   care:   pressing   and   holding  
b

utton 2 or 3 results   in   a   rapid   change  
i

n   the   speed   of   your   vehicle.
F
 
P
ressing   button   4   again   restores   operation  
o

f   the   cruise   control   (ON).
As   a   precaution,   it   is   recommended  
t

hat the cruise speed chosen be close
to the current speed of your vehicle, so
as to avoid any sudden acceleration or
deceleration   of   the   vehicle.
Adjusting the cruise speed
setting
The cruise control must be activated.
T o   modify   the   cruise   speed   setting   from   the  
c

urrent   speed   of   the   vehicle:
F
 
i
n   steps   of   +   or   -   1   mph   (km/h),   make  
r

epeated short presses on button 2 or 3,
F
 
c
ontinuously,   in   steps   of   +   or   -   5   mph  
(

km/h),   press   and   hold   button   2 or 3.
To
  modify   the   cruise   speed   setting   using  
m

emorised   speeds   and   from   the   touch   screen  
t

ablet:
F
p
ress button 5   to   display   the   six   memorised  
s

peed
 se
ttings,
F
p
ress the button for the desired speed
setting.
This   setting   becomes   the   new   cruise   speed.
To   modify   the   cruise   speed   setting   using  
m

emorised  
s
peeds  
a
nd  
f
rom  
y
our  
A
udio  
s
ystem  
(

only   with   the   monochrome   screen   C):
F
 
w
ith   the   system   first   activated.
For
  more   information   on   memorising   speeds,  
r

efer   to   the   corresponding   section.
F
 
m
ake   a   long   press   on   button   2 or 3, the
system
  displays   the   memorised   speed  
c

losest   to   the   actual   speed   of   the   vehicle;  
t

his   setting   becomes   the   new   cruise   speed.
F
 
t
o   choose   another   memorised   speed,   make  
a

nother   long   press   on   button   2 or 3.
Driving

203
C4-2_en_Chap06_conduite_ed02-2015
Temporarily exceeding the
programmed speed
When descending a steep hill, the cruise   control   system   cannot   prevent  
t

he   vehicle   from   exceeding   the  
pro

grammed
 s
peed.
When
  required   (overtaking   manoeuvre...),   it   is  
p

ossible   to   exceed   the   programmed   speed   by  
p

ressing   the   accelerator   pedal.
The
 
cruise   control   is   temporarily   overridden  
a

nd
 
the   programmed   speed   setting   flashes.
Only use the cruise control if the traffic
conditions will allow you to drive for a
certain   time   at   a   steady   speed   and   at   a  
s

afe   distance   from   the   vehicle   ahead.
Do not activate the cruise control in
urban   areas,   in   heavy   traffic,   on   winding  
o

r steep roads, on slippery or flooded
roads, or in conditions of poor visibility
(heavy   rain,   fog,   falling   snow...).
In   some   circumstances,   it   may   not  
b

e   possible   to   maintain   or   reach   the  
p

rogrammed   speed:   towing,   vehicle  
h

eavily   loaded,   steep   climb.
The   use   of   mats   not   approved   by  
C

ITROËN   may   inter fere   with   the  
o

peration   of   the   cruise   control.
To   avoid   any   risk   of   jamming   of   the  
ped

als:
-  e nsure   that   the   mat   is   positioned  c
o r r e c t l y,
-
 
n
ever   fit   one   mat   on   top   of   another.
To
 
return   to   the   programmed   speed,   simply  
r

elease   the   accelerator   pedal.
Once the vehicle has returned to the
programmed   speed,   the   cruise   control   takes  
ov

er
 
again:   the   display   of   the   programmed  
s

peed
  setting   becomes   steady   again.You   may   have   to   brake   to   control   the   speed   of  
y

our   vehicle.   In   this   case,   the   cruise   control   is  
au

tomatically
 p
aused.
To   activate   the   system   again,   press   button   4
.
Switching off
F Turn wheel 1 to the "0"  position:   the   cruise  c
ontrol   information   disappears   from   the  
sc

reen.
Operating fault
Flashing dashes indicate a fault with the cruise control   system.
Have
  it   checked   by   a   CITROËN   dealer   or   a  
q

ualified
 w
orkshop.
6
Driving