2016 Citroen C4 display

178
C4-2_en_Chap06_conduite_ed02-2015
Particular situations
In certain situations (e.g. starting the engine), the   parking   brake   can   automatically   alter   its  
f

orce.   This   is   normal   operation.
To
  advance   your   vehicle   a   few   centimetres  
w

ithout   starting   the   engine,   but   with   the   ignition  
o

n,   press   on   the   brake   pedal   and   release   the  
p

arking   brake   by pulling then releasing the
control lever A .
  The   full   release   of   the   parking  
b

rake   is   confirmed   by   the   warning   lamps   in  
t

he control lever A   and   in   the   instrument   panel  
g

oing   off   and   display   of   the   message   "Parking  
b

rake   off ".
Emergency braking
In the event of failure of the electronic
stability   control   system,   signalled   by t

he   illumination   of   this   warning   lamp,
 b

raking   stability   is   then   not   guaranteed.
In
 
the
 
event
 
of
 
a
 
failure
 
of
 
the
 
main
 
service
 
b

rake
 
or
 
in
 
an
 
exceptional
 
situation
 
(e.g.
 
driver
 
t

aken
 
ill,
 
under
 
instruction,
 
etc)
 
a
 
continuous
 
p

ull on the control lever A
 
will
 
stop
 
the
 
vehicle.
The electronic stability control provides stability
during
 em

ergency
 b

raking.
If
 
the
 
emergency
 
braking
 
malfunctions,
 
t

he
 
message
 
"Parking
 
brake
 
faulty"
 
will
 
be
 
d

isplayed. The
  emergency   braking   must   only   be  
us

ed
 in e
xceptional
 c
ircumstances.
In
 
this
 
event,   stability   must   be   assured   by   the  
d

river
 
by
 
repeating   alternate   "pull-release"  
a

ctions on the control lever A .
Driving

179
C4-2_en_Chap06_conduite_ed02-2015
Operating faults
If the electric parking brake malfunction warning lamp comes on together with one or more of the warning lamps presented in these tables, place the vehicle   in   a   safe   condition   (on   level   ground,   gear   engaged)   and   contact   a   CITROËN   dealer   or   a   qualified   workshop   without   delay.
Situations Consequences
Display
  of   the   message   "Parking brake fault "
  and   of   the   following  
w

arning
 lam
ps: -
 
T
he   automatic   functions   are   deactivated.
-
 
H
ill   start   assist   is   not   available.
-
 
T
he   electric   parking   brake   can   only   be   used   manually.
Display
  of   the   message   "Parking brake fault "
  and   of   the   following  
w

arning
 lam
ps: -
 
M
anual   release   of   the   electric   parking   brake   is   only   available   by   pressing  
t

he   accelerator   pedal   and   releasing   the   control.
-
 
H
ill   start   assist   is   not   available.
-
 
T
he   automatic   functions   and   the   manual   application   are   still   available.
Display
  of   the   message   "Parking brake fault "
  and   of   the   following  
w

arning
 lam
ps: -
 
T
he   automatic   functions   are   deactivated.
-
 
H
ill   start   assist   is   not   available.
6
Driving

180
C4-2_en_Chap06_conduite_ed02-2015
SituationsConsequences
To   apply   the   electric   parking   brake:
F
 
i
mmobilise   the   vehicle   and   switch   off   the   ignition.
F
 
p
ull   the   control   for   at   least   5   seconds   or   until   application   is   complete.
F
 
s
witch   on   the   ignition   and   check   the   switching   on   of   the   electric   parking  
b

rake   warning   lamps.
The
  application   is   slower   than   during   normal   operation.
To
  release   the   electric   parking   brake:
F
 
s
witch   on   the   ignition.
F
 
p
ull   the   control   and   hold   it   for   approximately   3   seconds   then   release   it.
If
  the   braking   warning   lamp   is   flashing   or   if   the   warning   lamps   do   not   come  
o

n   with   the   ignition   on,   these   procedures   will   not   work.   Place   the   vehicle  
o

n   level   ground   and   have   it   checked   by   a   CITROËN   dealer   or   a   qualified  
w

orkshop.
and possibly
flashing
Display
 
of
 
the
 
message
 
" Parking brake fault "
  and   of   the   following  
w

arning
 lam

ps: -
 
O
nly   the   automatic   application   on   switching   off   the   engine   and   automatic  
r

elease   on   acceleration   functions   are   available.
-
 
T
he   manual   application/release   of   the   electric   parking   brake   and   the  
e

mergency   braking   are   not   available.
and possibly
flashing
Battery
 
fault: -
 I

f   the   battery   warning   lamp   comes   on   you   must   stop   immediately   as   soon   as
 t

he   traffic   allows.   Stop   and   immobilise   your   vehicle   (if   necessary,   place   the
 t

wo   chocks   under   the   wheels).
-
 
A
pply   the   electric   parking   brake   before   switching   off   the   engine.
Driving

182
C4-2_en_Chap06_conduite_ed02-2015
Automatic gearbox
Gear selection gate
1. Gear  selector.
2. B utton " T" (snow) .
3.
B

utton " S" (spor t) .
4.
 P

osition   markings   for   the   gear   selector.P.
 Pa

rk.
-  
I
mmobilisation   of   the   vehicle,   parking   brake  
o

n   or   off.
-  
S
tarting   the   engine.
R.
 R
everse.
-  
R
eversing   manoeuvres,   vehicle   stationary,  
e

ngine   at   idle.
N.
 N
eutral.
-  
I
mmobilisation   of   the   vehicle,   parking   brake  
o

n.
-  
S
tarting   the   engine.
D.
 A
utomatic
 ope
ration.
M.+ / -
   M
anual   operation   with   sequential  
c

hanging   of   the   six   gears.
F  
P
ush   for wards   to   change   up   through   the  
g

ears.
or
F  P ull   backwards   to   change   down   through  
t

he   gears.
Gear selector positions
When you move the selector in the gate to select   a   position,   the   corresponding   indicator  
c

omes   on   in   the   instrument   panel.
P
 
Pa
rk
R
Reverse
N
Neutral
D
 
D
rive   (automatic   driving)
S

Sp
ort
 pro
gramme
T

S
now
 pro
gramme
1 to 6
   Gear   engaged   during   manual   operation
-
 
I
nvalid   value   during   manual   operation
Displays in the instrument
panelSix speed  automatic  gearbox  which  of fers  a  choice b
etween   the   comfort   of   fully   automatic   operation, e

nhanced   by   sport   and   snow   programmes,   and
 t

he   pleasure   of   manual   gear   changing.
Two
  driving   modes   are   offered:
-

a
utomatic operation for electronic
management
  of   the   gears   by   the   gearbox,  
w

ith a sport
 
programme   for   a   more  
d

ynamic   style   of   driving   and   a   snow
programme
  to   improve   driving   when  
t

raction is poor,
-

m
anual
 
operation   for   sequential   changing  
o

f   the   gears   by   the   driver.
Driving

183
C4-2_en_Chap06_conduite_ed02-2015
Moving off
If position N is engaged inadvertently while   driving,   allow   the   engine   to  
r

eturn   to   idle   then   engage   position   D to
accelerate. F

Sel
ect position D for automatic
 c
hanging
 o

f   the   six   gears.
The   gearbox   then   operates   in   auto-adaptive  
m

ode,   without   any   intervention   on   the   part  
o

f   the   driver.   It   continuously   selects   the   most  
s

uitable   gear   according   to   the   style   of   driving,  t
he profile of the road and the load in the
vehicle.
For
  maximum   acceleration   without   touching  
t

he selector, press the accelerator pedal down
fully
  (kick   down).   The   gearbox   changes   down  
a

utomatically   or   maintains   the   gear   selected  
u

ntil   the   maximum   engine   speed   is   reached.
On
  braking,   the   gearbox   changes   down  
a

utomatically   to   provide   effective   engine  
b

raking.
If you release the accelerator sharply, the
gearbox
  will   not   change   to   a   higher   gear   for  
s

afety   reasons.
When
  the   engine   is   running   at   idle,   with  
t

he   brakes   released,   if   position   R,
D
or
M   is   selected,   the   vehicle   moves  
e

ven   without   the   accelerator   being  
p

ressed.
Never leave children unsupervised in
the
  vehicle   when   the   engine   is   running.
When
  carrying   out   maintenance   with  
t

he   engine   running,   apply   the   parking  
b

rake   and   select   position   P.
Never select position N while the
vehicle
  is   moving.
Never select positions P or R unless the
vehicle
  is   completely   stationary.
If
  the   parking   brake   does   not   release  
a

utomatically,   check   that   the   front   doors  
a

re   fully   closed.
F
 
W

ith
 
your
 
foot
 
on
 
the
 
brake,
 
select
 
p

osition


P or N
.
F
 
S

tart
 
the
 
engine.
If this procedure is not followed, an audible
signal
 
is
 
heard,
 
accompanied
 
by
 
a
 
message
 
in
 
t

he
 
instrument
 
panel
 
screen.
F
 W
ith
 
the
 
engine
 
running,
 
press
 
the
 
brake
 ped
al.
F

Sel

ect position R , D or M.
Automatic operation
The parking brake is released manually, the v
ehicle   moves   off.
If
  the   parking   brake   is   on   and   automatic   mode  
i

s   activated,   accelerate   progressively.
If you do not press the brake pedal when trying   to   move   the   gear   selector   out o

f position P ,
  this   warning   lamp   or   this
 s

ymbol
 ap

pears
 in t
he
 in
strument
 pan
el
 a
ccompanied
 b

y
 
a
 
message,   flashing   of   the   P
 
symbol,   the   display   of
 a

 
message
  and   an   audible   signal.
F Check  that   the   display   in   the   instrument  p
anel   agrees   with   the   position   engaged.
F
 
G
radually   release   the   brake   pedal.
6
Driving

185
C4-2_en_Chap06_conduite_ed02-2015
Manual operation
D disappears and the gears engaged   appear   in   succession   on  
t

he   instrument   panel.
Invalid value during manual
operation
This symbol is displayed if a gear is   not   engaged   correctly   (selector  
b

etween   two   positions).
Stopping the vehicle
If the selector is not in position P ,
when   the   driver's   door   is   opened   or  
a

pproximately   45   seconds   after   the  
i

gnition   is   switched   off,   there   is   an  
a

udible   signal   and   a   message   appears.
F

R
eturn the selector to position P ;
 
t

he   audible   signal   stops   and   the  
m

essage
 d
isappears.
F

Sel

ect position M for sequential
 c

hanging
 o

f
 
the
 
six
 
gears.
F

P

ush the selector towards the +
 
sign
 
to
 
c

hange
 
up
 
a
 
gear.
F

P

ull the selector towards the -
 
sign
 
to
 
c

hange
 
down
 
a
 
gear.
It
 
is
 
only
 
possible
 
to
 
change
 
from
 
one
 
gear
 
to
 
a

nother
 
if
 
the
 
vehicle
 
speed
 
and
 
engine
 
speed
 p
ermit;
 
other wise,
 
the
 
gearbox
 
will
 
operate
 t
emporarily
 
in
 
automatic
 
mode.
If
 
the
 
engine
 
speed
 
is
 
too
 
low
 
or
 
too
 
high,
 
the
 
g

ear
 
selected
 
flashes
 
for
 
a
 
few
 
seconds,
 
then
 
t

he
 
actual
 
gear
 
engaged
 
is
 
displayed.
When
 
the
 
vehicle
 
is
 
stationary
 
or
 
moving
 
v

ery
 
slowly,
 
the
 
gearbox
 
selects
 
gear
 
1
automatically.
It is not necessary to release the accelerator
when
 c

hanging
 g

ear.
It
 
is
 
possible
 
to
 
change
 
from
 
position
 
D
(automatic)
 
to
 
position
 
M
 
(manual)
 
at
 
any
 
time.
The
 
sport
 
and
 
snow
 
programmes
 
do
 
not
 
o

perate
 
in
 
manual
 
mode. Before
 
s
witching  
o
ff  
t
he  
e
ngine,  
p
ut  
t
he  
s
elector  
i

n position P or N   to   place   the   gearbox   in  
neu

tral.
In
 
both   cases,   apply   the   parking   brake   to  
i

mmobilise   the   vehicle,   unless   it   is   programmed  
t

o
 
automatic   mode.
6
Driving

187
C4-2_en_Chap06_conduite_ed02-2015
Gear shift indicator*
Depending on the driving situation and your vehicle's   equipment,   the   system   may   advise  
y

ou   to   skip   one   (or   more)   gear(s).   You   can  
f

ollow   this   instruction   without   engaging   the  
i

ntermediate
 g
ears.
The
  gear   engagement   recommendations   must  
n

ot   be   considered   compulsory.   In   fact,   the  
c

onfiguration   of   the   road,   the   amount   of   traffic  
a

nd   safety   remain   determining   factors   when  
c

hoosing   the   best   gear.   Therefore,   the   driver  
r

emains   responsible   for   deciding   whether   or   not  
t

o   follow   the   advice   given   by   the   system.
This
  function   cannot   be   deactivated. -
 
Y
ou   press   the   accelerator   pedal.
Example:
-
 Y ou   are   in   third   gear.
-
 
T
he   system   may   suggest   that   you   engage  
a

  higher   gear.
The
  information   appears   in   the   instrument  
p

anel   in   the   form   of   an   arrow.
System
  which   reduces   fuel   consumption   by   recommending   the   most   appropriate   gear.
With   an   automatic   gearbox,   the   system   is   only  
a

ctive   in   manual   mode.
* Depending
  on   engine.
On
  vehicle   fitted   with   a   manual   gearbox,  
t

he   arrow   may   be   accompanied   by   the   gear  
re

commended. The
  system   adapts   its   gear   change  
r

ecommendation   according   to   the  
d

riving   conditions   (slope,   load, ...)   and  
t

he   demands   of   the   driver   (power,  
a

cceleration,   braking, ...).
The
  system   never   suggests:
-
 
e
ngaging   first   gear,
-
 enga

ging
 r
everse
 g
ear.
Operation
On BlueHDi Diesel 150 versions with
manual  gearbox,   the   system   may  
s

uggest   changing   into   neutral   so   that  
t

he   engine   can   go   into   standby   (STOP  
m

ode   with   Stop   &   Start),   in   certain  
d

riving   conditions.   In   this   case,   N is
displayed
  in   the   instrument   panel.
6
Driving

189
C4-2_en_Chap06_conduite_ed02-2015
Deactivation
Going into engine START mode
At any time, press the "ECO OFF" switch to
d eactivate   the   system.
This
  is   confirmed   by   the   switch   warning   lamp  
c

oming   on   accompanied   by   the   display   of   a  
m

essage.
Special cases: START invoked
automatically
The "ECO"  warning   lamp   goes   off  a
nd   the   engine   starts   automatically:
-

w

ith a manual gearbox , when you fully
depress the clutch pedal,
-

w

ith an automatic gearbox:
●
 
g

ear   selector   in   position   D or M, when
you
  release   the   brake   pedal,
●
 
o

r
 
gear   selector   in   position   N   and   brake  
p

edal   released,   when   you   place   the   gear  
s

elector in position D or M ,
●
 
o

r
 
when   you   engage   reverse   gear.For
  safety   reasons   or   to   ensure   smooth  o
peration,   START   mode   is   invoked  
a

utomatically
 w
hen:
-
 
y
ou   open   the   driver's   door,
-
 
y
ou   unfasten   the   driver's   seat   belt,
-
 
t
he   speed   of   the   vehicle   exceeds   15   mph  
(

25   km/h)   with   a   manual   gearbox   (3   km/h  
(

2   mph)   with   PureTech   130   petrol   and  
B

lueHDi   Diesel   115   and   120   versions)   or  
2 m

ph   (3   km/h)   with   an   automatic   gearbox,
-
 
t
he   electric   parking   brake   is   being   applied,
-
 
s
ome   special   conditions   (battery   charge,  
e

ngine   temperature,   braking   assistance,  
a

mbient   temperature...)   where   the   engine   is  
n

eeded   to   assure   control   of   a   system.
In this case the "ECO"
 

warning   lamp  
f

lashes   for   few   seconds,   then   goes  
o

f f.
This operation is perfectly normal.
With
  a   manual   gearbox   in   STOP   mode,  
i

f
 
a
  gear   is   engaged   without   fully  
d

epressing   the   clutch   pedal,   a   warning  
l

amp   comes   on   or   an   alert   message  
i

s
 
displayed   asking   you   to   depress   the  
c

lutch   pedal   to   restart   the   engine. If
  the   system   has   been   deactivated  
i

n   STOP   mode,   the   engine   restarts  
i

mmediately.
6
Driving