2016 Citroen C4 light

131
C4-2_en_Chap04_eclairage-et-visibilite_ed02-2015
Direction indicators
F Left:  lower   the   lighting   stalk   passing   the  p
oint   of   resistance.
F
 
R
ight:   raise   the   lighting   stalk   passing   the  
p

oint   of   resistance.Three flashes of the direction indicators
F Press briefly upwards or downwards, without   going   beyond   the   point   of  
r

esistance;   the   direction   indicators   will  
f

lash   3   times.
If
 
you
 
forget
 
to
 
cancel
 
the
 
direction
 
i

ndicators
 
for
 
more
 
than
 
twenty
 
s

econds,
 
the
 
volume
 
of
 
the
 
audible
 
s

ignal
 
will
 
increase
 
if
 
the
 
speed
 
is
 
above
 
4

0
 
mph
 
(60
 
km/h). On versions fitted with LED direction indicators,
the
  line   of   LEDs   is   illuminated   sequentially.
The
  brightness   of   the   daytime   runnning   lamps  
i

s   reduced   during   sequential   operation   of   the  
d

irection
 i
ndicators.
4
Lighting and visibility

132
C4-2_en_Chap04_eclairage-et-visibilite_ed02-2015
To avoid causing a nuisance to other road users,   the   height   of   the   halogen   headlamp  
b

eams   should   be   adjusted   according   to   the  
l

oad   in   the   vehicle.
0.
 1

  or   2   people   in   the   front   seats.
-.
 3

  people.
1.
 5

  people.
-.
 I

ntermediate
 s
etting.
2.
 5

  people   +   maximum   authorised   load.
-.
 I

ntermediate
 s
etting.
3.
 D

river   +   maximum   authorised   load.
Headlamp beam height adjustment
Automatic adjustment of
xenon headlamps
This system adjusts the height of the xenon headlamp   beams   automatically   and   when s

tationary,   according   to   the   load   in   the   vehicle,   so
 a

s   to   avoid   causing   a   nuisance   to   other   road   users.
If
  a   malfunction   occurs,   this  
w

arning   lamp   is   displayed   in   the  
i

nstrument   panel,   accompanied   by  
a

n   audible   signal   and   a   message   in  
t

he   screen.
The
  system   then   places   your  
h

eadlamps   in   the   lowest   position.
Do
  not   touch   the   xenon   bulbs.
Contact a CITROËN dealer or a
qualified
 w

orkshop.
The
 
initial
 
setting
 
is
 
position
 
"0" .
Manual adjustment of
halogen headlamps
Lighting and visibility

133
C4-2_en_Chap04_eclairage-et-visibilite_ed02-2015
Directional lighting
Programming
with directional lighting
without directional lighting
When
 
the
 
dipped
 
or
 
main
 
beam
 
headlamps
 
a

re
 
on,
 
this
 
function,
 
allows
 
the
 
light
 
beams
 
to
 
b

etter
 
follow
 
the
 
road.
The use of this function, coupled with the
xenon
 
headlamps
 
and
 
the
 
cornering
 
lighting,
 
c

onsiderably
 
improves
 
the
 
quality
 
of
 
your
 
l

ighting
 r

ound
 b

ends.
Operating fault
If a fault occurs, this warning lamp f lashes   in   the   instrument   panel,  
a

ccompanied   by   a   message   in   the  
sc

reen.
Contact
 
a
  CITROËN   dealer   or   a   qualified  
w

orkshop.
This
 
function   is   inactive:
-

w

hen stationary or at low speeds,
-
 w

hen
 r
everse
 i
s
 enga
ged.
The   system   is   activated   or  
d

eactivated in the vehicle
configuration
 m
enu.
 T

he
 
system   is   activated   by   default.
The
 
state
 
of   the   system   stays   in   memory   on  
s

witching
 
off   the   ignition.
4
Lighting and visibility

134
C4-2_en_Chap04_eclairage-et-visibilite_ed02-2015
Cornering lighting
With dipped or main beams, this function makes   use   of   the   beam   from   a   front   foglamp  
t

o   illuminate   the   inside   of   a   bend,   when   the  
v

ehicle   speed   is   below   25   mph   (approximately  
4

0   km/h)   (urban   driving,   winding   road,  
in

tersections,
 par
king
 m
anoeuvres...). with cornering lighting
without cornering lighting
Switching on
The system operates:
-  w hen   the   corresponding   direction   indicator  
i

s switched on,


or
-
 
f
rom   a   certain   angle   of   rotation   of   the  
s

teering
 w
heel.
Switching off
The system does not operate:
-  b elow   a   certain   angle   of   rotation   of   the  
s

teering
 w
heel,
-
 
a
bove   25   mph   (40   km/h),
-
 
w
hen   reverse   gear   is   engaged.
Programming
The system is activated or 
d eactivated in the vehicle
configuration
 m

enu.
The
  system   is   activated   by   default.
Lighting and visibility

135
C4-2_en_Chap04_eclairage-et-visibilite_ed02-2015
System for selection and control of the various front   and   rear   wiping   modes   for   the   elimination  
o

f   rain   and   cleaning   the   screens.
The
  vehicle's   front   and   rear   wipers   are  
d

esigned   to   improve   the   driver's   visibility  
a

ccording   to   the   climatic   conditions.
The
  wipers   are   controlled   by   means   of   stalk   A
for
  the   front   and   the   ring   B   for   the   rear.
Programming
Various automatic wiper control modes are also available   depending   on   whether   the   following  
o

ptions   are   fitted:
-
 a

utomatic
 r
ain
 sen
sitive
 w
indscreen
 w
ipers,
-
 r

ear   wiping   on   engaging   reverse   gear.
Model without AUTO wiping
Model with AUTO wiping
Windscreen wiper
A.  Wiping  speed   control   stalk:   raise   or   lower   the s
talk   to   the   desired   position.
Fast
  wiping   (heavy   rain).
Normal
  wiping   (moderate   rain).
Intermittent
  wiping   (proportional   to   the
 s

peed   of   the   vehicle).
Park.
Single
  wipe   (press   downwards   or   pull  
t

he   stalk   briefly   towards   you,   then  
r

elease).Automatic
  wiping   (press  
do

wn,
 t
hen
 r
elease).
or
Wiper controls
Single wipe (pull the stalk briefly towards you).
4
Lighting and visibility

136
C4-2_en_Chap04_eclairage-et-visibilite_ed02-2015
Automatic rain sensitive
windscreen wipers
Briefly push stalk A downwards.
Switching onSwitching off
Briefly push stalk A downwards
ag ain.
The
  automatic   rain   sensitive  
w

indscreen   wipers   must   be   reactivated  
i

f
 
the   ignition   has   been   off   for   more   than  
o

ne minute.
The
 
instruction
 
is
 
confirmed
 
by
 
a
 
wiping
 
cycle,
 
a

ccompanied
 
by
 
illumination
 
of
 
this
 
warning
 
l

amp
 
in
 
the
 
instrument
 
panel
 
and
 
an
 
activation
 
m

essage. The
 
instruction   is   confirmed   by   this   warning  
l

amp
 
going   off   in   the   instrument   panel   and/or  
t

he
 
display   of   a   deactivation   message.
The
 
windscreen
 
wipers
 
operate
 
automatically,
 
w

ithout any action on the part of the driver, if
rain
 
is
 
detected
 
(sensor
 
behind
 
the
 
rear
 
view
 
m

irror),
 
adapting
 
their
 
speed
 
to
 
the
 
intensity
 
of
 
t

he
 
rainfall.
Operating fault
If an automatic rain sensitive wiper malfunction o
ccurs,   the   wipers   will   operate   in   intermittent  
m

ode.
Contact
  a   CITROËN   dealer   or   a   qualified  
w

orkshop. Do
  not   cover   the   rain   sensor,   linked   with
 t

he sunshine sensor and located in the
centre of the windscreen behind the rear
view
  mirror.
Switch
  off   the   automatic   rain   sensitive
 w

ipers   when   using   an   automatic   car   wash.
In winter, it is advisable to wait until the
windscreen
  is   completely   clear   of   ice
 b

efore   activating   the   automatic   rain
 sen

sitive
 w
ipers.
Lighting and visibility

137
C4-2_en_Chap04_eclairage-et-visibilite_ed02-2015
Special position of the
windscreen wipers
This position permits release of the windscreen wiper   blades.
It
  is   used   for   cleaning   or   replacement   of   the  
b

lades.   It   can   also   be   useful,   in   winter,   to  
d

etach   the   blades   from   the   windscreen.
F
 
A
ny   action   on   the   wiper   stalk   in   the   minute  
a

fter   switching   off   the   ignition   places   the  
b

lades   vertically   on   the   screen.
F
 
T
o   park   the   blades   again,   switch   on   the  
i

gnition   and   operate   the   wiper   stalk.To
  maintain   the   effectiveness   of   the   flat  
w

iper   blades,   it   is   advisable   to:
-
 
h
andle   them   with   care,
-
 
c
lean   them   regularly   using   soapy  
w

ater,
-
 
a
void   using   them   to   retain  
c

ardboard on the windscreen,
-
 
r
eplace   them   at   the   first   signs   of  
w

e a r.
Windscreen and headlamp
wash
Low screenwash / headlamp
wash fluid level
On vehicle fitted with headlamp washers, the low   level   of   this   fluid   is   indicated   by   gauge   in  
t

he   reservoir   filler   neck   under   the   bonnet.
Checking
  and   topping   up   this   fluid   can   should  
b

e   done   with   the   engine   off.
The
  level   of   this   fluid   should   be   checked  
r

egularly,
 par
ticularly
 d
uring
 w
inter.
For
  more   information   on   checking   the  
s

creenwash   /   headlamp   wash   level,   refer   to   the  
c

orresponding
 s
ection.
F
 
P
ull   the   windscreen   wiper   stalk   towards  
y

ou.   The   windscreen   wash   then   the  
w

indscreen   wipers   operate   for   a   fixed  
p

eriod.
The   headlamp   washers   only   operate   when   the
dipped or main beam headlamps are on , with
the vehicle moving .
To   reduce   the   consumption   of   the   fluid  
b

y   the   headlamp   washers,   they   operate  
o

nly with every seventh use of the
screenwash   or   every   25   miles   (40   km)  
d

uring   a   given   journey.
4
Lighting and visibility

138
C4-2_en_Chap04_eclairage-et-visibilite_ed02-2015
B.  Rear  wiper   selection   ring:   turn   the   ring  t
o   place   the   desired   symbol   against   the  
m

arking.
Rear wiper
Park.
Intermittent
  wipe.
Wash-wipe.
Reverse gear
When reverse gear is engaged, the rear wiper w ill   come   into   operation   if   the   windscreen  
w

ipers   are   operating.
The function is activated or
deactivated via the vehicle
configuration
 m

enu.
This
  function   is   activated   by   default.
Programming
If a significant accumulation of snow or ice   is   present,   or   when   using   a   tailgate  
b

icycle   carrier,   deactivate   the   automatic  
r

ear   wiper   via   the   vehicle   configuration  
m

enu. T urn   the   ring   to   its   stop/the   rear   screen   wash,  t
hen   the   rear   wiper   operates   for   a   set   duration.
Lighting and visibility