2016 Citroen C4 light

215
C4-2_en_Chap07_infos-pratiques_ed02-2015
Before each use
Check that the towball is correctly fitted by verifying the following points:
-  t he   towball   is   correctly   locked   in   place   (position   A),
-
 
t
he   security   key   lock   is   on   and   the   key   removed;   the   locking   wheel   can   no   longer   be  
ope

rated,
-
 
t
he   towball   must   no   longer   move   at   all   in   its   carrier;   try   to   shake   it   by   hand.
During use
Never unlock the device when a trailer or load carrier is fitted to the towball.
N ever   exceed   the   maximum   authorised   weight   for   the   vehicle   plus   trailer   (Gross   Train  
W

eight   -   GTW).
Before
  driving,   check   the   adjustment   of   the   headlamp   beam   height.
For
  more   information   on   adjusting   the   headlamps,   refer   to   the   corresponding   section.
After use
For journeys made without a trailer or load carrier, the trailer harness socket must be folded away,   the   towball   removed   and    the   blanking   plug   inserted   in   the   carrier.   This   measure  
a

pplies   particularly   if   the   towball   could   hinder   visibility   of   the   number   plate   or   lighting.
7
Practical information

231
C4-2_en_Chap07_infos-pratiques_ed02-2015
Automatic gearbox
The gearbox does not require any maintenance   (no   oil   change).
Refer
  to   the   manufacturer's  
s

ervice schedule for details of
the
  level   checking   interval   for   this  
c

omponent.
Electric parking brake
This system does not require any routine   servicing.   However,   in  
t

he   event   of   a   problem,   have   the  
s

ystem   checked   by   a   CITROËN  
d

ealer   or   a   qualified   workshop.
Manual parking brake
If a loss of effectiveness of this
system i s  n oticed,  t he  p arking  b rake  
m

ust   be   checked,   even   between  
t

wo   services.
Brake pads
Brake wear depends on the style of   driving,   particularly   in   the   case  
o

f vehicles used in town, over short
distances.
  It   may   be   necessary   to  
Brake disc wear
For information on checking brake disc wear, contact a CITROËN
dealer
  or   a   qualified   workshop.
For
  more   information   on   the   electric   parking  
b

rake,   refer   to   the   corresponding   section.
Manual gearbox
The gearbox does not require any maintenance   (no   oil   change).
Refer
  to   the   manufacturer's   service  
s

chedule   for   the   checking   interval  
f

or   this   component.
Only
  use   products   recommended   by  
C

ITROËN   or   products   of   equivalent  
q

uality
 an
d
 sp
ecification.
In
  order   to   optimise   the   operation   of  
u

nits   as   important   as   those   in   the  
b

raking   system,   CITROËN   selects   and  
o

ffers   very   specific   products.
After
  washing   the   vehicle,   dampness,  
o

r   in   wintry   conditions,   ice   can   form  
o

n   the   brake   discs   and   pads:   braking  
e

fficiency   may   be   reduced.   Make   light  
b

rake   applications   to   dry   and   defrost  
t

he   brakes.
have
 
the
 
condition   of   the   brakes   checked,   even  
b

etween
 v

ehicle
 s
ervices.
Unless
 
there   is   a   leak   in   the   circuit,   a   drop   in  
t

he
 
brake
 
fluid   level   indicates   that   the   brake  
p

ads
 
are
 
worn. Checking
  this   system   must   be   done   by   a  
C

ITROËN   dealer   or   a   qualified   workshop.
7
Practical information

234
C4-2_en_Chap07_infos-pratiques_ed02-2015
Recommendations on storageProcedure
F Switch  off   the   ignition   and   remove   the  k
ey,   or   if   your   vehicle   has   one,   press   the  
S

TART/STOP   button   to   switch   off   the  
e

ngine. F

R
aise the boot floor for access to the
AdBlue
® tank. S
ecure
 
the   boot   floor   by   attaching   its   cord  
t

o
 
the
 
hook   on   the   parcel   shelf   support.
F
 
U

nclip
 
the   black   plastic   blanking   plug   using  
i

ts
 
tab.
F
 
I

nsert
 
your   fingers   into   the   aperture   and  
t

urn
 
the
 
blue   cap   a   6
th of a turn anti-
clockwise.
F
 
C

arefully
 
lift
 
off
 
the
 
cap,   without   dropping   it.
Never store bottles of AdBlue
® in your
vehicle. Before
  topping-up,   ensure   that   the   vehicle   is  
p

arked   on   a   flat   and   level   sur face.
In wintry conditions, ensure that the
temperature   of   the   vehicle   is   above   -11°C.  
O

therwise the AdBlue
® may be frozen and s
o
 
cannot
 
be
 
poured
 
into   its   tank.   Park   your  
v

ehicle
 
in
 
a
 
warmer
 
area   for   a   few   hours   to  
a

llow
 
the
 
top-up
 
to
 
be
 
carried   out.
AdBlue
® freezes at about -11°C and d
eteriorates   above   25°C.   It   is   recommended  
t

hat bottles be stored in a cool area and
protected
  from   direct   sunlight.
Under
 
these   conditions,   the   additive   can   be  
k

ept
 
for
 
at   least   a   year.
If the additive has frozen, it can be used once it
has
 
completely   thawed   out.
Practical information

252
C4-2_en_Chap08_en-cas-de-panne_ed02-2015
F Remove  the   air   deflector   by   unclipping  e
ach   of   its   three   attachment   points.
F
 
U
nclip   the   bonnet   release   cable   at   its  
two
  fixings.
F
 
M
ove   the   cable   down.
After
  changing   the   failed   bulb,   remember   to  
p

ut   everything   back   in   place   (cable   and   air  
d

eflector).
Depending
  on   the   engine   and   only   on   the   left  
h

and   side,   you   must   first   carry   out   the   following  
o

perations for access to the protective covers
on   the   bulbs.
Access to bulbs
Model with halogen headlamps
and LED light signature* (type 2)
1. Direction indicators (LEDs).
2. Daytime running lamps / sidelamps (LEDs).3. Dipped beam headlamps (H7).
4. M
ain beam headlamps (H7).
5.
F

o g l a m p s ( H11) .
Bulbs
  with   lugs,   type   H1,   H7...   take   care  
t

o   position   them   correctly   to   ensure   the  
b

est
 l
ighting.
Model with halogen headlamps
(t y p e 1)
1. Direction indicators (H21 clear).
2. Dipped beam headlamps (H7).
3.
M

ain beam headlamps (H1).
4.
D

aytime running lamps / sidelamps
(P21/5W XL).
5.
F

o g l a m p s ( H11) .Bulbs
  with   lugs,   type   H1,   H7...   take   care  
t

o   position   them   correctly   to   ensure   the  
b

est
 l
ighting.
*
  LED:   light   emitting   diodes.
In the event of a breakdown

256
C4-2_en_Chap08_en-cas-de-panne_ed02-2015
Changing foglamp bulbs
F Introduce a flat screwdriver in the hole in the f inisher.
F
 
P
ull   and   lever   to   unclip   the   bumper   finisher  
(

the   parking   sensor   stays   with   the   finisher).
F
 
R
emove   the   two   module   fixing   screws   and
 r

emove   it   from   its   housing.
F
 
D
isconnect   the   bulb   holder   connector.
F
 
T
urn   the   bulb   holder   a   quarter   of   a   turn   and  
e

xtract   it.
F
 
P
ull   the   bulb   and   change   it.
To refit, carry out these operations in reverse
o r d e r.
To
  replace   these   bulbs   you   may   also   contact   a
 C

ITROËN   dealer   or   a   qualified   workshop.
Changing the side spotlamps
(LEDs)
For the replacement of this type of light emitting diode   lamp,   contact   a   CITROËN   dealer   or   a  
q

ualified
 w
orkshop.
Changing integrated direction
indicator side repeaters
F Insert a flat screwdriver towards the centre of the repeater between the repeater and
the
  base   of   the   mirror.
F
 
T
ilt   the   flat   screwdriver   to   extract   the  
r

epeater   and   remove   it.
F
 
D
isconnect   the   repeater   connector.
To
  reassemble,   carry   out   these   operations   in  
r

everse
 o
rder.
Contact
  a   CITROËN   dealer   or   a   qualified  
w

orkshop   to   obtain   replacement   repeaters.
In the event of a breakdown

259
C4-2_en_Chap08_en-cas-de-panne_ed02-2015
To facilitate the removal of the lamp, carry out this   operation   with   the   tailgate   half   open.
F

I
nsert a thin screwdriver into the lens
cutout.
F
 
P
ush   it   outwards.
F
 
R
emove   the   lens.
F
 
C
hange   the   faulty   bulb.
To
  refit,   press   on   the   lens   to   clip   it   in   place.
Third brake lamp (LEDs)
For the replacement of this type of light emitting diode   lamp,   contact   a   CITROËN   dealer   or   a  
q

ualified
 w
orkshop.
Number plate lamps (W5W)
8
In the event of a breakdown

272
C4-2_en_Chap09_caracteristiques_ed02-2015
Petrol weights and towed loads (in kg)
The GTW and towed load values indicated are valid up to a maximum altitude of 1 000 metres; the towed load mentioned must be reduced by 10 % for each   additional   1   000   metres   of   altitude.
When
  towing,   the   maximum   authorised   speed   is   reduced   (comply   with   the   legislation   in   force   in   your   country).
High
  ambient   temperatures   may   result   in   a   reduction   in   the   per formance   of   the   vehicle   to   protect   the   engine;   if   the   ambient   temperature   is   above   37   °C,  
l

imit   the   towed   load.
Petrol engine
PureTech 110 V Ti 120 PureTech 130 S&S
Gearbox Manual

(5 - speed) Manual

(5 - speed) Manual
(6- speed) EAT6 automatic
(6- speed)
Model code:
NC... HNZ6
HNZ6/1 -/2 5FS0HNYM/S
HNYM/1S HNY T/S
HNY T/1S - /2S
-  
U
nladen   weight
1 2001 2051 205 1 240
-  
K
erb   weight*
1   275
1   280
1   280
1   315
-  
G
ross   vehicle   weight   (GV W)
1   770
1   765
1   790
1   810
-  
G
ross   train   weight   (GTW)  
 
o
n   a   12   %   gradient
2   970
3   065
3   090
3   110
-  
B
raked   trailer   (within   the   GTW   limit)  
 
o
n   a   12   %   gradient
1 200
1   300
1   300
1   300
-  
B
raked   trailer**   (with   load   transfer   within   the  
G

TW   limit)
1 450
1 550 1 5501 550
-  
U
nbraked   trailer
635640 640 655
-  
R
ecommended   nose   weight
75757575
*   The   kerb   weight   is   equal   to   the   unladen   weight   +   driver   (75   kg).
**   
T
he   weight   of   the   braked   trailer   can   be   increased,   within   the   GTW   limit,   if   the   GV W   of   the   towing   vehicle   is   reduced   by   an   equal   amount.   Warning:  
t

owing   using   a   lightly   loaded   towing   vehicle   may   have   an   adverse   effect   on   its   road   holding.
Technical data

275
C4-2_en_Chap09_caracteristiques_ed02-2015
Diesel weights and towed loads (in kg)
The GTW and towed load values indicated are valid up to a maximum altitude of 1 000 metres; the towed load mentioned must be reduced by 10 % for each   additional   1   000   metres   of   altitude.
When
  towing,   the   maximum   authorised   speed   is   reduced   (comply   with   the   legislation   in   force   in   your   country).
High
  ambient   temperatures   may   result   in   a   reduction   in   the   per formance   of   the   vehicle   to   protect   the   engine;   if   the   ambient   temperature   is   above   37   °C,  
l

imit   the   towed   load.
Diesel engine
HDi 90HDi 90 FAP BlueHDi 100 e-HDi 115
Gearbox Manual

(5 - speed) Manual

(5 - speed) Manual

(5 - speed) Manual

(6- speed)
Model code:
NC... 9HJC

9HJC/1 9HP0BHY6
BHY6/1 BHY6/2S 9HD8/S

9HD8/1S 9HD8/2S
-  
U
nladen   weight
1   248
1 205 1 200 1 2051   280
1   280
-  
K
erb   weight*
1   323 1   280 1   275
1   280
1   355
1   355
-  
G
ross   vehicle   weight   (GV W)
1   745
1   790 1   830 1   840
1   820
1   820
-  
G
ross   train   weight   (GTW)  

o
n   a   12   %   gradient
2 545
2   890 3   130
3   140
3   120
2 220
-  
B
raked   trailer   (within   GTW   limit)
o

n   12   %   gradient
800
1 10 0 1   300 1   300 1   300
400
-  
B
raked   trailer**   (with   load   transfer   within   the  
G

TW   limit)
1 050
1   350
1 550 1 550 1 550 600
-  
U
nbraked   trailer
640640 635 640 670400
-  
R
ecommended   nose   weight
757575 757575
*   The   kerb   weight   is   equal   to   the   unladen   weight   +   driver   (75   kg).
**   
T
he   weight   of   the   braked   trailer   can   be   increased,   within   the   GTW   limit,   if   the   GV W   of   the   towing   vehicle   is   reduced   by   an   equal   amount.   Warning:  
t

owing   using   a   lightly   loaded   towing   vehicle   may   have   an   adverse   effect   on   its   road   holding.
9
Technical data