Page 105 of 396

103
C4-2_en_Chap03_ergonomie-et-confort_ed02-2015
12 V accessory socket
F To connect a 12 V accessory (max power: 1
20 W), lift the cover and connect a
s
uitable
a
daptor.
Component
which
protects
against
sunlight
f
rom
the
front
or
the
side,
also
equipped
with
an
i
lluminated
v
anity
m
irror.
F
W
ith
the
ignition
on,
raise
the
concealing
f
lap;
the
mirror
is
illuminated
automatically.
This
sun
visor
is
also
equipped
with
a
ticket
h
o l d e r.
Sun visor Illuminated glove box
It has dedicated locations for storing a water b
ottle, the vehicle's handbook pack...
Its
lid has locations for storing a pen, a pair of
g
lasses, tokens, maps, a cup...
F
T
o open the glove box, raise the handle.
The
glove box is illuminated when the lid is
ope
ned.
It
gives access to the passenger's front airbag
d
eactivation switch A .
It
contains an adjustable ventilation nozzle B,
distributing
the same conditioned air as the
v
ents in the passenger compartment. The connection of an electrical device
not approved by CITROËN, such as a
USB
charger, may adversely affect the
o
peration of vehicle electrical systems,
c
ausing faults such as poor telephone
r
eception or inter ference with displays
in
the screens.
3
Ease of use and comfort
Page 107 of 396

105
C4-2_en_Chap03_ergonomie-et-confort_ed02-2015
1. Front courtesy lamp
2. Front map reading lamps
3.
R
ear courtesy lamp
4.
R
ear map reading lamps
Courtesy lam ps
- when the vehicle is unlocked,
- w hen the key is removed from the ignition,
-
o
n opening a door,
-
w
hen the remote control locking button is
u
sed to locate your vehicle.
Front and rear courtesy lamps
In this position, the courtesy lamp comes on gradually:
It
switches
off gradually:
-
w
hen
the vehicle is locked,
-
w
hen
the ignition is switched on,
-
3
0
seconds after the last door is closed.To
switch off the rear courtesy lamp, put it in
t
he the "permanently off " position.
Permanently
off.
Permanent
l
ighting.
Front and rear map reading
lamps
F With the ignition on, press the c
orresponding s witch.
Take
care not to put anything in contact
w
ith the courtesy lamps.
In
permanent lighting mode, the
l
ighting time varies according to the
c
ircumstances:
-
w
ith the ignition off, approximately
t
en
m
inutes,
-
i
n energy economy mode,
a
pproximately thirty seconds,
-
w
ith the engine running, unlimited.
When the courtesy lamp is in the
"
permanent lighting" position, the rear
c
ourtesy lamp also comes on, except if
i
t
is
in the "permanently off " position.
3
Ease of use and comfort
Page 108 of 396
106
C4-2_en_Chap03_ergonomie-et-confort_ed02-2015
Interior mood lighting
Switching on
At night, two interior mood lamps in the front c
ourtesy lamp come on automatically when the
s
idelamps are switched on.
Switching off
The interior mood lighting switches off automatically when the sidelamps are
switched
off.
It
can be switched off manually by adjusting the
i
nstrument panel lighting rheostat button to one
o
f the lowest settings.
The
dimmed
passenger
compartment
lighting
improves visibility in the vehicle when the light is
p
o o r.
Ease of use and comfort
Page 109 of 396

107
C4-2_en_Chap03_ergonomie-et-confort_ed02-2015
Panoramic sunroof
Electric blind
Opening
Turn the dial to the left (four possible settings).
Closing
Return the dial to the initial position.
Safety anti-pinch
If the blind encounters an obstacle during c
losing, it stops and partially opens again.
If
the blind fails to close at a second attempt,
i
t may be necessary to force the closing of the
b
lind using the reinitialisation procedure.
The blind is controlled electrically by a rotary
dial.
Reinitialising the system
Following reconnection of the battery, or in the e
vent of a malfunction in its operation, it may
b
e necessary to reinitialise the system:
F
t
urn the dial to the fully closed position,
F
t
hen immediately press the dial, closing
s
tarts after about 10 seconds,
F
m
aintain pressure on the dial until the blind
h
as fully closed.
The anti-pinch function is inoperative
during these operations.
If
the
position
of
the
blind
does
not
agree
with
t
he position indicated by the dial, press the dial
to
open
the
blind
to
this
position. In
the event of contact during operation
o
f the blind, you must reverse its
m
ovement. To do this, turn the dial.
When the driver operates the dial, they
must
ensure that nothing prevents the
b
lind from closing correctly.
The
driver must ensure that the
p
assengers use the blind correctly.
Be
aware of children during operation
o
f the blind.
Your
vehicle
is
fitted
with
a
tinted
glass
panoramic
sunroof
which
increases
the
light
and
visibility
in
the
p
assenger
compartment.
Its
electric
blind
helps
control
the
temperature
in
the
passenger
compartment.
3
Ease of use and comfort
Page 112 of 396
110
C4-2_en_Chap03_ergonomie-et-confort_ed02-2015
Front armrest
Comfort and storage system for the driver and front passenger.
T he height and length of the armrest cover can be adjusted.
Height adjustment
F Raise the cover to the required position (
low, intermediate or high).
F
I
f you raise the cover slightly beyond the
h
igh position, guide it when lowering it to
t
he low position.
Longitudinal adjustment
F Slide the cover fully for wards or rear wards.
Storage
There is a storage space below the cover of t
he armrest. Depending on equipment, this can
c
ontain a 230 V / 50 Hz socket and the back-up
r
eader for the electronic key of the Keyless
E
ntry and Starting system.
F
Ra
ise
t
he
l
ever.
F
R
aise the cover fully.
Ease of use and comfort
Page 117 of 396

115
C4-2_en_Chap03_ergonomie-et-confort_ed02-2015
Rear seats
Rear head restraints
These have one position for use (up) and a stowed position (down).
They
can also be removed.
To
remove a head restraint:
F
r
elease the backrest using control 1,
F
t
ilt the backrest 2 slightly for wards,
F
p
ull the head restraint upwards to the stop,
F
t
hen, press the lug A. F
M
ove the corresponding front seat for ward
i
f necessary.
F
P
osition the seat belt between the outer
and centre head restraints to avoid
trapping
the belt when repositioning the
s
eat backrest.
F
P
lace the head restraints in the low
position. F
P
ull control 1 for wards to release the seat
back
2.
F
F
old the seat back 2 on to the cushion.
Never drive with the head restraints
removed;
they must be in place and
c
orrectly
adj
usted.
Folding the backrest
Bench seat with fixed one-piece cushion and split backrests (1/3 - 2/3) which can be folded individually to adapt the load space in the boot.
3
Ease of use and comfort
Page 121 of 396
119
C4-2_en_Chap03_ergonomie-et-confort_ed02-2015
To remove the shelf:
F u nhook the two cords,
F
r
aise the shelf slightly, then remove it.
There
are several options for storing the shelf:
-
e
ither upright behind the front seats,
-
o
r flat at the base of the boot.
Rear parcel shelf
The hooks can be used to secure shopping bags.
Hooks
Access to the storage box
An additional hook under the shelf is u sed to hold up the boot floor using its
c
ord, to facilitate access to the tools
and
spare wheel or the temporary
p
uncture repair kit...
3
Ease of use and comfort
Page 122 of 396
120
C4-2_en_Chap03_ergonomie-et-confort_ed02-2015
F To connect a 12 V accessory (max power: 1
20 W), remove the cap and connect an
a
ppropriate
a
daptor.
F
T
urn the key to the ignition on position.
12 V accessory socket
This is a removable lamp, fitted in the boot wall, which can be used to light the boot or as
a
torch.
For
information on the boot lamp, refer to the
c
orresponding
s
ection.
To r c h
Operation
This torch operates with NiMH type
rechargeable batteries.
It
has a battery life of approximately 45 minutes
a
nd charges while you are driving.
Observe
the polarities when fitting the
r
echargeable
b
atteries.
Never
r
eplace
t
he
r
echargeable
b
atteries
w
ith normal disposable batteries.
Ease of use and comfort