2016 Citroen C4 CACTUS Owner's Manual

279
The services available depend on the   network,   the   SIM   card   and   the  
c

ompatibility   of   the   Bluetooth   telephone  
u

sed.   Check   the   telephone   manual   and  
w

ith   your   network   provider   for   details   of  
t

he   services   available   to   you.
The
  ability   of   the   system   to   connect  
w

ith   only   one   profile   depends   on   the  
t

elephone.   The   three   profiles   may   all  
c

onnect   by   default.
Visit
 
www.citroen.co.uk   for   more   information  
(

compatibility,   additional   help, ...).
The
  recognised   telephone  
a

ppears   in   the   list.
Depending
  on   your   telephone,   you   may   be  
a

sked
  to   accept   automatic   connection   every  
t

ime
 
the   ignition   is   switched   on. On return to the vehicle, if the last telephone
connected
  is   present   again,   it   is   reconnected  
a

utomatically   and   within   around   30   seconds  
a

fter   switching   on   the   ignition   the   pairing   is  
d

one   without   any   action   on   your   part,   with  
(

Bluetooth
 a
ctivated).
To
  modify   the   automatic   connection   mode,  
s

elect the telephone in the list then select the
desired
 p

rofile.
Depending
  on   the   type   of   telephone,  t
he   system   will   ask   you   to   accept   or   not  
t

he   transfer   of   your   contacts.
If not, select " Update".
Connecting a Bluetooth®
peripheral device
Automatic reconnection
On switching on the ignition, the telephone c
onnected   when   the   ignition   was   last   switched  
o

ff   is   automatically   reconnected,   if   this  
c

onnection   mode   had   been   activated   during   the  
pa

iring
 p
rocedure.
The
  connection   is   confirmed   by   the   display   of   a  
m

essage   and   the   name   of   the   telephone.
Manual connection
Press on Telephone to   display   the  p
rimary pag e.
Press
  on   the   secondary   page.
Select " Bluetooth "
  to   display   the   list  
o

f   paired   peripherals.
Select
 
the   peripheral   to   connect.
Press on " Search for devices ".
The
 
connection   is   confirmed   by   the   display   of   a  
m

essage
 
and   the   name   of   the   telephone.
.
Audio and Telematics

280
Managing paired
telephones
This function allows the connection or
disconnection  of   a   peripheral   device   as  
w

ell   as   the   deletion   of   a   pairing. Using
  the   telephone   is   not  r
ecommended   while   driving.
Park
  the   vehicle.
Make
  the   call   using   the   steering  
m

ounted   controls.
Press on Telephone
 

to   display   the  
p

rimary
 pag
e.
Press
  on   the   secondary   page.
Select " Bluetooth "
  to   display   the   list  
o

f   paired   peripheral   devices.
Select
  the   peripheral   in   the   list.
Select " Search for devices "
Or "Connect / Disconnect " to start or
end
  the   Bluetooth   connection   with  
t

he   selected   device.
Or "Delete "
  to   delete   the   pairing.
Receiving a call
An incoming call is announced by a ring and a superimposed   display   in   the   screen.
Make
  a   short   press   on   the   steering  
m

ounted   TEL button to accept an
incoming
 c

all.
Make
  a   long   press
on
  the   steering   mounted   TEL button
to
  reject   the   call.
Or Select "End call".
Making a call
Calling a new number
Press on Telephone  to   display   the  p
rimary pag e.
Enter
  the   phone   number   using   the  
d

igital
 k
eypad.
Press " Call"
  to   start   the   call.
Calling a contact
Press on Telephone to   display   the  p
rimary pag e.
Or
  make   a   long   press
on
  the   steering   mounted   TEL
 
button.
Audio and Telematics

281
Select "Contacts ".
Select
 
the   desired   contact   from   the   list   offered.
Select " Call".
Calling a recently used number
Press on Telephone  to   display   the  p
rimary pag e.
Select " Call log ".
Select
 
the   desired   contact   from   the   list   offered.
It
 
is
  always   possible   to   make   a   call  
d

irectly   from   the   telephone;   park   the  
v

ehicle   first   as   a   safety   measure.
Managing contacts / entries
Press on Telephone  to   display   the  p
rimary pag e.
Select " Contacts ".
Select " View".
Select " Create"
 

to
 
add
 
a
 
new
 
contact.
Or "Modify "
  to   edit   the   selected   contact.
Or "Delete "
  to   delete   the   selected  
c

ontact.
Or "Delete all "
  to   delete   all   information  
f

or   the   selected   contact. Select "
By name" to view the list of
contacts.
.
Audio and Telematics

282
The table below gives answers to the most frequently asked questions on your audio system.
Frequently asked questions
Navigation
QUESTIONANSWER SOLUTION
The route calculation is not
successful. The
  navigation   settings   may   conflict   with   the   current   location  
(

exclusion   of   toll   roads   on   a   toll   motor way).Check
  the   settings   in   the   "Navigation"   menu.
The
 
POIs   do   not   appear. The   POIs   have   not   been   selected.Select
  the   POIs   in   the   list   of   POIs.
The
 
Risk   areas   audible  
w

arning   does   not   work. The
  audible   warning   is   not   active.Activate
  audible   warnings   in   the   "Navigation"  
m

enu.
The
 
system   does   not  
s

uggest   a   detour   around   an  
i

ncident
  on   the   route. The
  guidance   criteria   do   not   take   account   of   TMC   messages. Select   the   "Information"   function   in   the   list   of  
g

uidance
 c
riteria.
I
 
receive   a   Risk   areas   alert  
w

hich
 
is   not   on   my   route.Other
  than   guidance,   the   system   announces   all   Risk   areas  
p

ositioned   in   a   cone   located   in   front   of   the   vehicle.   It   may   provide   an  
a

lert   for   Risk   areas   located   on   nearby   or   parallel   roads.Zoom
  in   on   the   map   to   view   the   exact   position   of  
t

he   Risk   areas.   Select   "On   the   route"   to   no   longer  
r

eceive   alerts   other   than   guidance   or   to   reduce  
t

he   time   for   the   announcement.
Audio and Telematics

283
QUESTIONANSWER SOLUTION
Certain
  traffic   jams   along  
t

he
 
route   are   not   indicated  
i

n
 
real
 
time. On
  starting,   it   is   several   minutes   before   the   system   begins   to   receive  
t

he   traffic   information. Wait
  until   the   traffic   information   is   being   received  
c

orrectly   (display   of   the   traffic   information   icons  
o

n   the   map).
The
  filters   are   too   restrictive. Modify
  the   settings.
In
  certain   countries,   only   major   routes   (motor ways...)   are   listed   for  
t

he   traffic   information. This
  phenomenon   is   normal.   The   system   is  
d

ependent   on   the   traffic   information   available.
The
 
altitude   is   not  
d

isplayed. On
  starting,   the   initialisation   of   the   GPS   may   take   up   to   3   minutes   to  
r

eceive   more   than   4   satellites   correctly.Wait
  until   the   system   has   completed   starting  
u

p,   so   that   there   is   GPS   coverage   of   at   least  
4

 satellites.
Depending
  on   the   geographical   environment   (tunnel...)   or   the  
w

eather,   the   conditions   of   reception   of   the   GPS   signal   may   vary.This
  phenomenon   is   normal.   The   system  
i

s   dependent   on   the   GPS   signal   reception  
c

onditions.
.
Audio and Telematics

284
Radio
QUESTIONANSWER SOLUTION
The
 
quality   of   reception   of  
t

he
 
radio   station   listened  
t

o
 
gradually   deteriorates  
o

r
 
the
 
stored   stations   do  
n

ot
 
function   (no   sound,  
87

.5 Mhz   is   displayed...). The
  vehicle   is   too   far   from   the   transmitter   used   by   the   station  
l

istened   to   or   there   is   no   transmitter   in   the   geographical   area  
t

hrough   which   the   vehicle   is   travelling.Activate
  the   "RDS"   function   by   means   of   the  
s

hort-cut   menu   to   enable   the   system   to   check  
w

hether   there   is   a   more   power ful   transmitter   in  
t

he   geographical   area.
The
  environment   (hills,   buildings,   tunnels,   basement   car   parks...)  
b

lock   reception,   including   in   RDS   mode.This
  phenomenon   is   normal   and   does   not   indicate  
a

  fault   with   the   audio   system.
The
  aerial   is   absent   or   has   been   damaged   (for   example   when   going  
t

hrough   a   car   wash   or   into   an   underground   car   park).Have
  the   aerial   checked   by   a   CITROËN   dealer.
I
 
cannot   find   some   radio  
s

tations in the list of
stations
 r

eceived. The
  station   is   not   received   or   its   name   has   changed   in   the   list. Press   on   the   "Update   list"   function   in   the   system  
t

o   update   the   list   of   stations   received.
Some
  radio   stations   send   other   information   in   place   of   their   name  
(

the   title   of   the   song   for   example).
The
  system   interprets   this   information   as   the   name   of   the   station.
The
 
name   of   the   radio  
s

tation
 c
hanges.
Audio and Telematics

285
Media
QUESTIONANSWER SOLUTION
Playback   of   my   USB  
m

emory   stick   starts   only  
a

fter
 
a
 
very   long   wait  
(

around
  2   to   3   minutes). Some
  files   supplied   with   the   memory   stick   may   greatly   slow   down  
a

ccess   to   reading   the   memory   stick   (multiplication   by   10   of   the  
c

atalogue   time). Delete
  the   files   supplied   with   the   memory   stick  
a

nd   limit   the   number   of   sub-folders   in   the   file  
s

tructure   on   the   memory   stick.
When
 
I
 
connect   my   iPhone  
a

s
 
telephone   and   to   the  
U

SB
 
port   at   the   same   time,  
I

 
am
 
unable   to   play   the  
m

usic
 
files. When
  the   iPhone   connects   automatically   as   a   telephone,   it   forces  
t

he   streaming   function.   The   streaming   function   takes   the   place   of  
t

he   USB   function   which   is   then   not   useable,   there   is   a   period   without  
s

ound   of   the   track   being   played   with   Apple
® players.D isconnect   and   reconnect   to   the   USB   port   (the  
U

SB   function   takes   priority   over   streaming).
Some
 
characters
 
in
 
the
 
m

edia
 
information
 
are
 
not
 
d

isplayed
 
correctly
 
while
 
p

laying. The
 
audio
 
system
 
does
 
not
 
display
 
some
 
types   of   characters. Use   standard   characters   to   name   tracks   and  
f

olders.
Playing
 
of
 
streaming
 
files
 
d

oes
 
not
 
start. The
 
peripheral
 
device
 
connected
 
does
 
not
 
support   automatic   play. Start   the   playback   from   the   device.
The
 
names
 
of
 
tracks
 
and
 
t

he
 
track
 
length
 
are
 
not
 
d

isplayed
 
on
 
the
 
screen
 
w

hen
 s

treaming
 a

udio. The
 
Bluetooth
 
profile
 
does
 
not
 
allow
 
the
 
transfer   of   this   information.
.
Audio and Telematics

286
Settings
QUESTIONANSWER SOLUTION
In
 
changing   the   setting  
o

f
 
treble   and   bass   the  
e

qualizer   setting   is  
d

eselected. The
  selection   of   an   equalizer   setting   imposes   the   balance   settings.
Modifying
  one   without   the   other   is   not   possible.Modify
  the   balance   or   equalizer   settings   to   obtain  
t

he   desired   musical   ambience.
In
 
changing   the   equalizer  
s

etting,
  treble   and   bass  
r

eturn
 
to   zero.
When
 
changing   the  
b

alance   settings,   the  
d

istribution   setting   is  
d

eselected. The
  selection   of   a   distribution   setting   imposes   the   balance   settings.
Modifying
  one   without   the   other   is   not   possible.Modify
  the   balance   or   distribution   settings   to  
o

btain   the   desired   musical   ambience.
When
 
changing   a   sound  
d

istribution   setting,  
t

he
 
balance   setting   is  
d

eselected.
Audio and Telematics