2016 Citroen BERLINGO MULTISPACE ignition

181
Berlingo-2-VP_en_Chap08_aide-rapide_ed01-2016
2. Sidelamps
Type A, W5W - 5W
- 
Remove
  the   cover   by   pulling   the  
flexible

  rubber   tab.
-
 
Remove
  the   bulb   holder   fitted   by  
pressure

  by   pulling   the   connector.
-
 
Change
  the   bulb.
-
 
Ensure
  that   the   cover   is   refitted  
correctly all round to assure correct
sealing.
Front lamps
1. Dipped / Main beam headlamps
T ype C, H4 - 55W
-
 
Remove
  the   centre   cover   by   pulling  
the

  flexible   rubber   tab.
-
 
Disconnect
  the   electrical   connector.
-
 
Release
  the   retaining   tab.
-
 
Change
  the   bulb   taking   care  
to

  align   the   metal   part   with   the  
grooves

  on   the   lamp.
-
 
Reposition
  the   retaining   tab.
-
 
Ensure
  that   the   cover   is   refitted  
correctly all round to assure correct
sealing.
High pressure washing Open

 
the
 
bonnet.
 
T

o
 
access
 
the
 
bulbs,
 
reach

 
behind
 
the
 
headlamp
 
unit.
Carry out the operations in reverse
order
 
to
 
refit
 
each
 
bulb
 
and
 
check
 
that
 
the

 
bonnet
 
is
 
closed
 
securely.
Halogen
 
bulbs
 
must
 
be
 
changed
 
with

 
the
 
headlamp
 
off.
 
Wait
 
a
 
few
 
minutes

 
(risk
 
of
 
serious
 
burns).
 
d
o not touch the bulb directly with your
fingers,
 
use
 
lint-free
 
cloths.
It
 
is
 
normal
 
for
 
condensation
 
to
 
form
 
inside

 
the
 
headlamps.
 
Regular
 
use
 
of
 the
 
vehicle
 
eliminates
 
this
 
misting.
The
 
bulbs
 
must
 
be
 
changed
 
with
 
the ignition of

f or with the battery
disconnected.
 
Wait
 
approximately
 
3 minutes

 
after
 
changing
 
the
 
bulb
 
before

 
reconnecting
 
the
 
battery.
Check
 
that
 
the
 
lamps
 
operate
 
correctly
 
after

 
each
 
operation.
When using this type of washing
on stubborn dirt, do not persist on
the
 
headlamps,
 
the
 
lamps
 
and
 
their
 
edges

 
to
 
avoid
 
damaging
 
their
 
coating
 
and

 
seals.
QUICk HELP
8
Changing a bulb

187
Berlingo-2-VP_en_Chap08_aide-rapide_ed01-2016
Dashboard fuses
Tilt the cover to gain access to the
fuses.Fuses
F Amperes  Aa
llocation
1 15 Rear wiper
2 -
n

ot used
3 5
a

irbag
4 10 Air
  conditioning,   diagnostic   socket,   mirror   control,  
headlamp

  beam
5 30 Electric windows
6 30 Locks
7 5Rear
  courtesy   lamp,   front   map   reading   lamp,   roof  
console
8 20 Audio

  equipment,   screen,   tyre   under-inflation  
detection,

  alarm   and   siren
9 30Front
  and   rear   12V   socket
10 15 Central
  column
11 15 Low current ignition switch
12 15 Rain and sunshine sensor, airbag
13 5 Instrument
  panel
14 15 Parking
  sensors,   digital   air   conditioning   controls,  
hands-free

  phone   kit
15 30 Locks
16 -
n

ot used
17 40Rear
  screen/mirrors   demist/defrost
QUICk HELP
8
Changing a fuse

190
Berlingo-2-VP_en_Chap08_aide-rapide_ed01-2016
Placing the windscreen wiper
blades in the special positionChanging a front wiper blade
- Lift
  the   wiper   arm.
-  
Unclip
  the   blade   and   remove   it.
-
 
Fit
  the   new   blade.
-
 
Push
  back   the   wiper   arm.
Changing the rear wiper blade
- Lift  the   wiper   arm,   then   unclip   the  blade
  and   remove   it.
-
 
Fit
  the   new   blade   and   push   back  
the

  wiper   arm.
CHANGING A WIPER BLADE
- Within  a   minute   after   switching   off  the
  ignition,   press   the   wiper   stalk  
downwards to position the wiper
blades along the windscreen pilla

rs
(special
  position). To return the windscreen wipers to
their
  normal   position,   switch   on   the  
ignition

  and   operate   the   wiper   stalk.
Changing a wiper blade

Audio and Telematics
 259
Berlingo-2-VP_en_Chap10a_SMEGplus_ed01-2016
The services available depend on
the  network,   the   SIM   card   and   the  
c

ompatibility   of   the   Bluetooth   telephone  
u

sed.   Check   the   telephone   manual   and  
w

ith   your   network   provider   for   details   of  
t

he   services   available   to   you.
The
  ability   of   the   system   to   connect  
w

ith only one profile depends on the
telephone.
  The   three   profiles   may   all  
c

onnect   by   default.
Visit
 
www.citroen.co.uk   for   more   information  
(

compatibility,   additional   help,   ...).
The recognised telephone
appears
  in   the   list.
Depending
  on   your   telephone,   you   may   be  
a

sked
  to   accept   automatic   connection   every  
t

ime
 
the   ignition   is   switched   on.
on r
eturn to the vehicle, if the last telephone
connected is present again, it is reconnected
automatically
  and   within   around   30   seconds  
a

fter switching on the ignition the pairing is
done without any action on your part, with
(Bluetooth
 a

ctivated).
To
  modify   the   automatic   connection   mode,  
s

elect the telephone in the list then select the
desired
 p

rofile.depending on the type of telephone,
the   system   will   ask   you   to   accept   or   not  
t

he   transfer   of   your   contacts.
If not, select " Update".
Connecting a Bluetooth®
peripheral device
Automatic reconnection
on switching on the ignition, the telephone
connected when the ignition was last switched
off
  is   automatically   reconnected,   if   this  
c

onnection   mode   had   been   activated   during   the  
pa

iring
 p
rocedure.
The
  connection   is   confirmed   by   the   display   of   a  
m

essage   and   the   name   of   the   telephone.
Manual connection
Press on Telephone to display the
primary pag e.
Press
  on   the   secondary   page.
Select " Bluetooth " to display the list
of
  paired   peripherals.
Select
 
the   peripheral   to   connect.
Press on " Search for devices ".
The
 
connection   is   confirmed   by   the   display   of   a  
m

essage
 
and   the   name   of   the   telephone.
TECHNOLOGY on BOARD
10

Audio and Telematics
274
Berlingo-2-VP_en_Chap10b_Rd45_ed01-2016
Media
USB player
This unit consists of a USB port
and
  an   auxiliary   Jack   socket,  
d

epending   on   model.
Insert
  a   USB   memory   stick   into   the   USB   port  
o

r connect a USB peripheral device to the USB
port
  using   a   suitable   cable   (not   supplied).
The
 
system   creates   playlists  
(

temporary   memory),   which   can   take  
f

rom
 
a
 
few   seconds   to   several   minutes  
o

n
 
the
 
first   connection.
Reducing
  the   number   of   non-music  
f

iles
 
and   the   number   of   folders   reduces  
t

his
 
waiting   time.   Playlists   are   updated  
e

very
 
time   the   ignition   is   switched   off   or  
a

 
USB
 
memory   stick   is   connected.
The
 
lists   are   memorised:   if   the   lists   are  
n

ot changed, the subsequent loading
time
 
is
 
reduced. Press and hold REFRESH LIST
to
display
  the   different   classifications.
Select by " Folder"
  /   "Artist "
  /  
"G

enre"
  /  
"Pl

aylist".
Press OK to select the classification
required, then press OK again to
confirm. Press REFRESH LIST
briefly to
display the previously selected
classification.
na

vigate through the list using the
left /right
  and   up/down   buttons.
Confirm
  the   selection   by  
p

ressing

OK.
Press one of these buttons to gain
access
  to   the   previous   /   next   track   in  
t

he   list.
Press and hold one of the buttons for
fast
  for ward   or   back.
Press one of these buttons to
gain
  access   to   the   previous   /   next  
"Fo

lder"
  /   "Artist "
  /   "Genre "
  /  
"Pl

aylist"
  in   the   list.

Audio and Telematics
278
Berlingo-2-VP_en_Chap10b_Rd45_ed01-2016
Telephone
Pairing a Bluetooth® telephone
Screen C
(Available according to model and version)
As a safety measure and because they r
equire prolonged attention on the part
of the driver, the operations for pairing
of
  the   Bluetooth   mobile   telephone   with  
t

he   Bluetooth   hands-free   system   of  
y

our   audio   equipment   must   be   carried  
o

ut with the vehicle stationary and the
ignition
 o

n.
Go
 
to
 
www.citroen.co.uk   for   more   information  
(

compatibility,   more   help, ...).
ac

tivate the telephone's Bluetooth function
and ensure that it is "visible to all" (telephone
configuration).
Press the MENU
 

button. In
  the   menu,   select:
- "Bluetooth : Telephone - Audio "
-
"Bluetooth configuration "
-
"Perform a Bluetooth search "
A
  window   is   displayed   with   a   message   that   a  
s

earch   is   in   progress.
The services available depend on
the
  network,   the   SIM   card   and   the  
c

ompatibility   of   the   Bluetooth   device  
u

sed.
Consult
  your   telephone's   manual   and  
y

our operator to find out which services
are
  available   to   you.
*
 
If
 
your   telephone   is   fully   compatible. The first 4 telephones recognised are displayed
in
  this   window.
The " Telephone "
  menu   permits   access   to   the  
f

ollowing   functions   in   particular:   "Directory " *,
" Calls list ", "Consult the paired equipment ".Select
  the   telephone   to   be   connected   from   the  l
ist.   Only   one   telephone   can   be   connected   at  
a

  time.
A
  virtual   keypad   is   displayed   in   the   screen:  
e

nter   a   code   with   at   least   4   digits.
Confirm
  by   pressing   OK.
A
 

message
 
in
 
the
 
screen
 
indicates
 
the
 
telephone
 c

hosen.   To   accept   the   pairing,   enter   the   same
 c

ode   on   the   telephone,   then   confirm   with   OK.
If
  pairing   fails,   the   number   of   attempts   is   not
 l

imited.
A
  message   that   the   pairing   has   been  
s

uccessful   appears   in   the   screen.
The
  automatic   connection   authorised   is   only  
a

ctive   after   the   telephone   has   been   configured.
The directory and the call list can be accessed
after
  the   necessary   synchronisation   period.