2016 AUDI TT ROADSTER display

Downloaded from www.Manualslib.com manuals search engine Navigation
Using a destination from the directory
Applies to: vehicles with navigation system
You can navigate directly to entries in the direc­
tory.
Fig. 154 Possible storage locations in directory
Important: A postal address with navigation data
must be available for a contact or a navigation
destination must have already been added for a
contact.
.,. Press the I NAV
/M
AP
I button
repeatedly until
the Enter destination menu is displayed
¢ page 169, Fig. 153.
.,. Select: left control button > Directory > a con-
tact.
Directory contacts are displayed in alphabetical
order and are displayed together with a location
symbol:
(D Business postal address
@ Private postal address
@ Business navigation destination
@ Private navigation destination
- Select and confirm a postal address or a naviga­
tion destination. If you select a navigation des­
tination, route guidance is started immediate­
ly.
- If you select a postal address, you can check the
address details again.
- You can then select and confirm Start route
guidance.
Further directory functions in the navigation sys­
tem can be found on¢ page 175.
((!> Note
-Addresses which you have imported from
your mobile phone into the MMI can also be
used as navigation destinations.
172 -
If a directory contact is greyed out, no navi­
gation destination/postal address has yet
been added for the contact.
Entering a special destination
Applies to: vehicles with navigation system
Nav1gat1on
Search area
Find entry
Select category Special
destinations
in immediate vicin ity (:
I
� myAudi special destinations
Bl Petrol station
P Parking space
Fig. 155 Entering a special destination
.,. Press the I NAV/
MAP
! button repeatedly until
the Enter destination menu is displayed
¢page 169, Fig. 153 .
.,. Select: Left control button > Special destina­
tions.
- To change the search area: Select and confirm
Search area > a search area from the list.
- To find a special destination in a specific cate­
gory: Select: Select category > category de­
sired, e.g. Restaurants.
The following search categories are available:
In immediate vicinity: You can select special des­
tinations from different categories. Special desti­
nations in a radius of up to 200 km from the vehi­
cle's position are Listed.
In vicinity of route: Special destinations along
the route can only be selected when the route
guidance function is active. The special destina­
tions are Located directly on or in the immediate
vicinity of your route.
In vicinity of destination/In vicinity of stopover:
You can also select special destinations from dif­
ferent categories in the vicinity of the destina­
tion/stopover. For example, you can Look for a
hotel or a car park at the destination.
In new town: Enter the name of the town. You
can select special destinations from different cat­
egories. You can use this function to find special �

Downloaded from www.Manualslib.com manuals search engine 0
0
N
,.....
N
......
0
,.....
Vl
CX) destinations
in any town irrespective of the
destination currently set or the vehicle position.
@ Note
- The distances to special destinations are
shown as the crow flies from the vehicle's
current position. The actual driving distance
between your current position and the spe­
cial destination is updated automatically.
However, the list of special destinations is
not sorted again.
- Sometimes there are destination entries in
the list that cannot be displayed completely
because they are too long. If you select one
of these entries with the rotary pushbutton,
detailed information on the selected entry
will be displayed automatically after a few
seconds.
Online point of interest search
Applies to: vehicles with navigation system and Audi connect
You can look for special destinations online.
Important: The requirements for Audi connect
services must be met ¢page 159.
.,. Press the I NAV/
M
AP!
button repeatedly until
the Enter destination menu is displayed
¢page 169, Fig. 153.
.,. Select: left control button > Online search. The
search area that was last set will be displayed
in the entry field.
-To change the search area: Select and confirm
Search area > a search area from the list.
- To find an online destination in the selected
search area: Enter a new town if necessary. En­
ter a search term (e.g. restaurant) and select
and confirm an online destination. Select and
confirm Start route guidance.
- To find an online destination in a specific cate­
gory: Select: Select category > category de­
sired, e.g. Hotels.
Please see ¢ page 172, Entering a special desti­
nation for information on which search areas are
available. Navigation
You can also use the speech dialogue system to
search for on line destinations ¢ table on
page 136.
@ Note
- Please always note the information in the
chapter ¢ page 167.
- Further information can be found on the In­
ternet at www.audi.com.
Calling up destinations from myAudi
account
Applies to: vehicles with navigation system and Audi connect
You can import navigation destinations from
your myAudi account to the MMI.
Important: You must have created a myAudi ac­
count at my.audi.com, added a vehicle to the ac­
count and stored one or more destinations.
.,. Press
the I N
AV/MAP!
button repeatedly until
the Enter destination menu is displayed
¢page 169, Fig. 153.
.,. Select: left control button > myAudi contacts.
.,. If necessary, enter your myAudi login details or
your myAudi PIN. The contacts stored in myAu­
di will be displayed .
- Select and confirm a contact > desired destina­
tion .
- Select and confirm Start route guidance.
@ Note
- You only have to enter your myAudi login
details once.
- You will receive your myAudi PIN after set­
ting up a myAudi account. For more infor­
mation, please refer to my.audi.com.
Entering a destination using coordinates
Applies to: vehicles with navigation system .,.
Press
the I NAV/M
AP! button repeatedly until
the Enter destination menu is displayed
¢page 169, Fig. 153.
... Select: left control button> Geographic coordi-
nates. .,.
173

Downloaded from www.Manualslib.com manuals search engine Navigation
- Select and confirm either Latitude or Longi­
tude.
- Turn the rotary pushbutton to adjust the Lati­
tude/Longitude.
- Press the rotary pushbutton to confirm your en­
try.
- Select and confirm Start route guidance.
Adding a stopover
Applies to: vehicles with navigation system
You can enter a new destination while route
guidance is active.
Fig. 156 Example: Current route guidance with stopover
Important: A destination must already have been
entered.
.,. Press the I NAV
/MAP
I button repeated Ly u nti L
the Enter destination menu is displayed
¢ page 169, Fig. 153.
Entering a desti nation as a sto pover
- Enter a destination in the entry Line (D
¢page 169, Fig. 153.
- Select a destination from the results List and
confirm it.
- Select and confirm Set as stopover.
Deleting a stopo
ver
- Turn the rotary pushbutton to the Left until the
active route guidance is displayed.
-Select and confirm Delete stopover ¢Fig. 156
under the stopover (D
. Select and confirm the
system request if necessary. The stopover will
be deleted.
l l
This function is not available in the Mexican market.
174 Further
options when entering a
destination
Applies to: vehicles with navigation system
"' Press the right control button.
Depending on the function chosen, the following
options may be available to you when you are en­
tering a destination:
Stop route guidance: The route guidance func­
tion must be active. The route guidance will be
stopped. For more information, please refer to
¢page 175.
Map settings: Refer to¢ page 180.
Navigation settings: Refer to ¢ page 176.
Voice guidance: Refer to¢ page 177.
Route criteria: Refer to ¢ page 176.
Show location on map: Important: You must
have selected a destination from the results List.
The destination entered will be shown on the
map.
Parking at this location: Important: You must
have selected a destination from the results List .
All the parking facilities near the Location selec­
ted are shown on the infotainment display.
Special destinations along the route: All special
destinations near the vehicle are displayed while
route guidance is active.
Delete: The selected entry will be deleted. You
can delete individual entries or all the entries
(e.g. favourites or Last destinations).
Audi connect for this location 1
)
: Important: You
must have selected a destination from the re­
sults List. Enables you to search for e.g. City
events or Travel information around the selected
location.
Online traffic data*1): Reception of online traffic
information ¢ page 183 can be switched on/off.
Online traffic data: Reception of on line traffic in-
formation ¢page 183 can be switched on/off. �

Downloaded from www.Manualslib.com manuals search engine Country
selection: Select all the countries in the
list (g) which, for example, you wish to include
in your searches ¢page 170.
Store as favourite: Refer to¢ page 175.
Stop route guidance
Applies to: vehicles with navigation system
Important: The route guidance function must be
active.
� Push the rotary pushbutton upwards. The ac­
tive route guidance will be displayed
¢ page 174, Fig. 156.
� Select and confirm Delete destination/Delete
stopover ¢page 174, Fig. 156 under the line
desired. The destination will be deleted. Or:
Press the right control button > Stop route
guidance.
Home address
Applies to: vehicles with navigation system
� Press the I NAV/ M
AP !
button repeatedly until
the Enter destination menu is displayed
¢page 169, Fig. 153.
Storing a home address
- Select and confirm Home address
@
¢ page 169, Fig. 153. After calling up the
home address for the first time, you will be
asked to set a home address.
- Select and confirm Create now.
- Enter a destination or select a destination from
the list. Or:
- Select and confirm a destination > right control
button > Store as home address.
A home address is stored in the MMI regardless
of any mobile phone which may be connected.
This home address is always available, even if no
mobile phone is connected to the MMI.
Editing home address
-Select Home address
@¢
page 169, Fig. 153.
- Select: right control button > Edit home ad-
� dress.
0
N -Select and confirm a new destination as the
,.....
� home address.
0
,..... Navigation
The selected destination will be stored as the
new home address.
Favourites
Applies to: vehicles with navigation system
� Press
the I NAV/MAP! button repeatedly until
the Enter destination menu is displayed
¢page 169, Fig. 153.
- To store an existing destination as a favourite:
Search for the desired destination using the en­
try field. Or: Select and confirm a destination
from the list. Select: right control button >
Store as favourite.
- To rename a favourite: Select the left control
button > Favourites > a favourite from the List
> right control button > Rename favourite.
- To move a favourite: Select the left control
button > Favourites > a favourite from the List
> right control button > Move favourite. Select
and confirm the item desired.
- To delete a favourite: Select and confirm a fa­
vourite > right control button> Delete this fa­
vourite/Delete all favourites.
Directory contacts
Applies to: vehicles with navigation system
Two addresses (private/business) can be stored
as a destination for each contact in the directo­
r y .
� Press the I NAV/MAP! button repeatedly until
the Enter destination menu is displayed
¢page 169, Fig. 153.
Storing a destination as a contact in the
di rectory
Important: A mobile phone must have been con­
nected to the MMI system.
- Select: a destination > right control button>
Add destination to contact.
- Select and confirm Add business destination or
Add private destination.
- Enter a name. Or: Select and confirm a directo­
ry contact from the list.
- Select and confirm Store business card.
175

Downloaded from www.Manualslib.com manuals search engine Navigation
Other settings
Navigation settings
Applies to: vehicles with navigation system
"" Press the
I NAV
/M
AP
I button
repeatedly until
the Enter destination menu is displayed
¢ page 169, Fig. 153.
""Select: right control button > Navigation set-
tings.
Depending on the function selected, you can use
the following settings:
Always display alternative routes
When this function is switched on�. up to three
suggested routes and their characteristics are
displayed on the overview map. Refer to
¢ page 177, Displaying alternative routes.
Fuel warning
When the fuel gauge is in the reserve zone, a
message will appear when this function is on �­
A list of nearby filling stations will be displayed
after you confirm this message. When you select
one of the filling stations, the route to its loca­
tion will be calculated based on the current posi­
tion of your car.
Arrival notification*
The arrival notification is switched off when the
vehicle leaves the factory.
When this function is switched on�. the MMI
will inform you when you are approaching selec­
ted special destinations (e.g. imported myAudi
special destinations). You can also have a sound
played using the Play notification tone function.
Delete myAudi special destinations*
Destinations that you import from your myAudi
account to your MMI are automatically saved.
You can delete them individually or all at once.
Presentation mode
You can use the presentation mode to plan and
"drive" a journey effectively without the need to
move the vehicle. You can choose your start loca-
l l
This function is not available in the Mexican market.
176 tion
manually (Select start location) if, for exam­
ple, you would like to calculate a route starting
from a different position than the current posi­
tion of the vehicle. Start the presentation mode
to simulate route guidance.
Route criteria
Applies to: vehicles with navigation system
©- [tS
[
®-�
®- [J,[ @-�
®-[l;lj (?)-�
©-� ®-�
Fig. 157 Possible route criteria
"" Press the I NAV/
MAP
! button repeatedly until
the Enter destination menu is displayed
¢page 169, Fig. 153.
"" Select: right control button > Route criteria.
(D Traffic avoidance 1
> .!!;
- automatic: The route is automatically opti­
mised using the current traffic information. If
the MMI system does not display a detour route
although the automatic traffic avoidance func­
tion is on and a traffic jam has been reported
on the planned route, this is because the esti­
mated time required for the detour is longer
than the delay on the route with the traffic jam.
- manual: The MMI indicates that a better route
is available and informs you of the potential
time saving ¢ page 184. You can then choose
which route you would like to use.
- off: The route is not updated automatically. No
optimised route is suggested.
@ Motorways/ @ Vignette roads1
>/ © Toll
roads/ ® Ferries/ ® Motorail 1
>: If you do not
wish for the navigation system to include motor­
ways, vignette/toll roads, ferries or car trains
when calculating the route, you can select the
..,.

Downloaded from www.Manualslib.com manuals search engine 0
0
N
,.....
N option
avoid. You can also use the Vignette
roads option to set the countries for which you
possess a vignette.
0 Ti me restricted
- avoid: Roads that are closed at certain times of
the day (e.g. pedestrian zones) are excluded
from the route calculation.
- automatic: The MMI system determines wheth­
er the restricted road can be included in the
route calculation based on the time tables cur­
rently stored in the navigation data.
- with: Roads that are closed at certain times of
the day are included in the route calculation.
® Seasonally restricted1
)
- avoid: Roads that are closed seasonally (e.g.
mountain passes) are excluded from the route
calculation.
- automatic: The MMI system determines wheth­
er the seasonally restricted road can be inclu­
ded in the route calculation based on the time
tables currently stored in the navigation data.
- with: Roads that are closed seasonally are in-
cluded in the route calculation.
HOV lanes 2
)
: Select avoid to exclude HOV lanes
from the route calculation. Select allow to have
the MMI system include HOV lanes in your navi­
gation and display them on the map.
Voice guidance
Applies to: vehicles with navigation system
� Press the I NAV/MAP
!
button repeatedly until
the Enter destination menu is displayed
¢page 169, Fig. 153.
� Select: right control button> Voice guidance.
Voice guidance: The navigation cues can be
played in complete or compact form. You can use
the traffic option to have the system play only
those announcements on traffic obstructions
that are relevant for your route. Select off if you
do not want the system to play any navigation
cues.
8 l)
This function is not available in the Mexican market.
,.....
� 2
> This function is only available in the Mexican market. Navigation
Voice guidance during calls: Navigation cues
during a telephone call can be switched on/off.
Entertainment fader: Refer to ¢ page 218.
Volume of spoken cues: Refer to¢ page 218.
Displaying alternative routes
Applies to: vehicles with navigation system
Fig. 158 Display of alternative routes
Important: A destination must have been en­
tered and you must have started route guidance.
� Press the I NAV/MAP
!
button repeatedly until
the Enter destination menu is displayed
¢page 169, Fig. 153.
� Select: right control button> Display alterna­
tive routes.
When this function is switched on, up to three
suggested routes and their characteristics are
displayed on the map ¢Fig. 158.
The following information (if available) is dis­
played in the route suggestions:
- Route type (fast(!), alternative fast@, eco­
nomical route@)
- Distance to destination and estimated time of
arrival
- Level of congestion on the route including
length of delay
The route which was calculated on the basis of
your route criteria is highlighted on the map. You
may also be shown further information on partic­
ular characteristics of your route (e.g. ferry or
motorail connections)@ ¢ Fig. 158. For more in­
formation on the individual route criteria, please
refer to ¢page 176.
.,..
177

Downloaded from www.Manualslib.com manuals search engine Navigation
You can use the rotary pushbutton to preselect
the possible alternative routes and have them
displayed on the map. Select and confirm the
Map How to use the map
Applies to: vehicles with navigation system
Fig. 159 Illustration: Map with crosshairs switched on
Fig. 160
� Press the I NAV /MAP
I button
repeatedly until
the map is displayed ¢Fig. 160.
Zooming
- Turn the rotary pushbutton clockwise or anti­
clockwise. You can also zoom in or out on the
map using MMI touch ¢ page 126. Or: Scroll
the left thumbwheel on the multi-function
steering wheel* ¢page 22.
Switching the crosshairs on/off
178 route
which you would like to use for route guid­
ance.
- To switch on the crosshairs: Press the rotary
pushbutton while the map is being displayed.
- To switch off the crosshairs: Press the
I BACK!
button.
With the crosshairs switched on ¢Fig. 159:
@ Orientation: The map is displayed either in
the 2D north or 2D driving position perspec­
tive.
@ Scale: Turn the rotary pushbutton clockwise/
anti-clockwise to zoom in or out.
�

Downloaded from www.Manualslib.com manuals search engine 0
0
N
,.....
N
......
0
,.....
Vl
CX) @
Zoom: When the Automatic zoom function is
switched on, an "A" for "automatic" is shown
in the zoom symbol.
@ The crosshairs: Move the crosshairs in the de­
sired direction using the MMI touch pad and
select an item on the map as the destination.
Alternatively, have information displayed on
the map item.
® Map content (special destinations, favour­
ites): If several special destinations are loca­
ted close to each other, their symbols are
stacked on the map.
@ Additional information on the position of the
crosshairs: If you move the crosshairs onto a
point on the map, any existing information
on the current position of the crosshairs will
be displayed. Press the rotary pushbutton to
call up the destination details or start route
guidance. If the crosshairs are switched off,
the road you are currently on will be dis­
played.
0 Display of an upcoming turn-off. If no ma­
noeuvre is coming up, the remaining distance
to the destination /
stopover is shown at this
position along with the estimated arrival
time.
@ For information on having a better route dis­
played, refer to¢ page 184.
With the crosshairs switched off¢ Fig. 160:
® If a directional arrow is displayed, a bar
graph will also appear. The fewer bars are
displayed, the shorter the distance to the
turn-off point.
@ Speed display 1
>: Display of the maximum
speed limit on motorways, dual carriageways
and other major roads.
@ Road the vehicle is currently on. When the
vehicle is stationary, "offroad" is displayed
here.
@ Location of the vehicle (@)
@ Traffic information display (�I O_ N
_L_I_ N
_E�I* or
!TMC! /!TMCpro!*
)
@ Altitude display (L!'.\)
1} Applies to vehicles without camera-based speed limit dis­
play only Navigation
@ Route information: Various information is
displayed during route guidance (e.g. the up­
coming manoeuvre including the calculated
distance and road name). Traffic information
or special destinations on your current route
are also displayed.
Map functions
Applies to: vehicles with navigation system
� Press the I N
AV/MAP
! button repeatedly until
the map is displayed ¢page 178, Fig. 160.
� Select: left control button> desired function.
Switch to destination entry
The Enter destination menu is displayed
¢ page 169, Fig. 153.
Traffic announcements
Up-to-date traffic information is shown on the in­
fotainment display. Refer to¢ page 182.
Route list
The route list can only be displayed when the
route guidance function is active; it contains in­
formation on the route, road names and the
length of the route sections. On motorways, po­
tential parking areas and service stations will be
displayed. You can select them as e.g. a stopover.
Special destinations along the route
Important: The route guidance function must be
active.
You can search for special destinations along
your current route. Refer to ¢page 172.
Further options on the map
Applies to: vehicles with navigation system
� Press the I N
AV/MAP
! button repeatedly until
the map is displayed ¢page 178, Fig. 160.
� Press the right control button.
Depending on the function chosen, the following
additional options may be available in the Map
menu: .,.
179