2015 SUZUKI NEXA battery
[x] Cancel search: batteryPage 9 of 288
Downloaded from www.Manualslib.com manuals search engine 0-3
VEHICLE DETAILS
MODEL CHASSIS NO. ENGINE NO. KEY NO.DATE OF
DELIVERYODOMETER
READING (KM)BATTERY
MAKESR.NO.
BATCH CODE
OWNER’S NAME & ADDRESS ________________________________________________________________________________
_________________________________________________________________________________________________________
E-mail ID_____________________________________________________________TEL.NO. ______________________________
ADDRESS/STAMP OF SELLING DEALER SELLING DEALER CODE
SHOWROOM
WORKSHOP IMPORTANT INFORMATION TO CUSTOMER
Dear Customer,
For any assistance with regard to our product, please contact
General Manager/Works Manager at any of our A U T H O R I S E D - A R U T I
<00330055005a0055004b004900000000002e00250038002100000000004400450041004c0045005200000000000f000000000041005500540048004f005200490053004500440000002d004100520055005400490000000000330055005a0055004b004900
0000000057004f0052004b00530048004f0050000e0000> For
D G G L W L R Q D O L Q T X L U \ \ R X may contact our 2 E G I O N A L / F F I C E O R
<00330045005200560049004300450000002400450050004100520054004d0045004e0054000e0000003400480045000000210044004400520045005300530045005300000041004e0044000000300048004f004e00450000004e004f0053000e0000004100
52004500000047004900560045004e000000000049004e0000>
<00330045005200560049004300450000002e004500540057004f0052004b000000000022004f004f004b004c00450054000000500052004f0056004900440045004400000041004c004f004e00470000005700490054004800000054004800450000005600
45004800490043004c0045000e0000>
Page 24 of 288
Downloaded from www.Manualslib.com manuals search engine % ( ) 2 5 ( ' 5 , 9 , 1 *
0 6 (
If you cannot unlatch the tailgate by pushing
the unlatch switch (1) due to a discharged
battery or malfunction, follow the proce-
dures below to unlatch the tailgate from
inside the vehicle.
1) Remove the luggage compartment
cover (if equipped) and fold the rear seat
forward for easier access. Refer to
“Folding Rear Seats” section for details
on how to fold the rear seat forward.
2) Push open the tailgate from inside by
pushing up on the emergency lever (2)
using a flat blade screwdriver or the jack
handle. The tailgate will be latched again
by closing the tailgate simply.
68LM246
If the tailgate cannot be unlatched by push-
ing the unlatch switch (1), have the vehicle
inspected by your D X W K R U L V H G 0 D U X W L 6 X ] X N L
Z R U N V K R S
. H \ O H V V 3 X V K 6 W D U W 6 \ V W H P 5 H P R W H
& R Q W U R O O H U . H \ O H V V ( Q W U \ 6 \ V W H P
7 U D Q V P L W W H U
64MS022
Your vehicle is equipped with either a key-
less push start system remote controller
(Type A) or a keyless entry system trans-
mitter (Type B). The remote controller has
a keyless entry system and a keyless push
start system. The transmitter has only a
keyless entry system. For details, refer to
the following explanations.
: $ 5 1 , 1 *
$ O Z D \ V P D N H V X U H W K D W W K H W D L O J D W H L V
F O R V H G D Q G O D W F K H G V H F X U H O \ & R P
S O H W H O \ F O R V L Q J W K H W D L O J D W H K H O S V S U H
Y H Q W R F F X S D Q W V I U R P E H L Q J W K U R Z Q
I U R P W K H Y H K L F O H L Q W K H H Y H Q W R I D Q
D F F L G H Q W & R P S O H W H O \ F O R V L Q J L W D O V R
K H O S V N H H S H [ K D X V W J D V H V I U R P H Q W H U
L Q J W K H Y H K L F O H
& $ 8 7 , 2 1
Page 28 of 288
Downloaded from www.Manualslib.com manuals search engine % ( ) 2 5 ( ' 5 , 9 , 1 *
0 6 (
80J056
(1) 80 cm (2 1/2 feet)
When the remote controller is within
approximately 80 cm (2 1/2 feet) from a
front door handle or the tailgate switch, you
can lock or unlock the doors by pushing
the request switch.
NOTE:
• If the remote controller is outside the
request switch operating range
described above, you will not be able to
operate the request switch.
• If the battery of the remote controller
runs down or there are strong radio
waves or noise, the request switch oper-
ating range may be reduced or the
remote controller may be inoperative.
• If the remote controller is too close to the
door glass, the request switches may not
operate.• If a spare remote controller is in the vehi-
cle, the request switches may not oper-
ate normally.
• The remote controller will only operate a
request switch if it is within the switch’s
operating range. For example, if the
remote controller is within the operating
range of the driver’s door request switch
but not the front passenger’s door
request switch or the tailgate request
switch, the driver’s door switch can be
operated but the front passenger’s door
switch or tailgate switch cannot be oper-
ated.
• Avoid operations of switch with sharp
objects.
NOTE:
The keyless push start system may not
function correctly in certain environments
or under certain operating conditions such
as the following:• When there are strong signals coming
from a television, power station or a cel-
lular phone.
• When the remote controller is in contact
with or covered by a metal object.
• When a radio wave type remote keyless
entry is used nearby.
• When the remote controller is placed
near an electronic device such as per-
sonal computer.
Some additional precautions you should
take and information you should be aware
of are:
• Make sure the key is stowed in the
remote controller. If the remote controller
becomes unreliable, you will not be able
to lock or unlock the doors.
• Be sure that the driver always carries the
remote controller.
•If you lose one of the remote controllers,
ask your
D X W K R U L V H G 0 D U X W L 6 X ] X N L
Z R U N V K R S as soon as possible for a
replacement. Be sure to have your
dealer program the
new remote
controller code in your vehi-cle’s
memory so that the old code is
erased.
• You can use up to four remote controllers
and the keys for your vehicle. Ask your
D X W K R U L V H G 0 D U X W L 6 X ] X N L Z R U N V K R S
for
details.
• The battery life of the remote controller is
about two years, but it can vary depend-
ing on usage conditions.
(1)
(1)(1)
( ; $ 0 3 / (
NOTICE
7 K H U H P R W H F R Q W U R O O H U L V D V H Q V L W L Y H
H O H F W U R Q L F L Q V W U X P H Q W 7 R D Y R L G G D P
D J L Q J W K H U H P R W H F R Q W U R O O H U
Page 30 of 288
Downloaded from www.Manualslib.com manuals search engine % ( ) 2 5 ( ' 5 , 9 , 1 *
0 6 (
the driver’s door will be automatically
unlocked.
• If you open the front passenger’s door
and lock the door by turning the lock
knob forward or pushing the power door
locking switch, the front passenger’s
door will be automatically unlocked.
NOTE:
• The reminder will not operate when the
remote controller is on the instrument
panel, in the glove box, in a storage
compartment, in the sun visor or on the
floor etc.
• Be sure that the driver always carries the
remote controller.
• Do not leave the remote controller in the
vehicle when leaving the vehicle. 5 H S O D F H P H Q W R I W K H E D W W H U \
If the remote controller becomes unreli-
able, replace the battery.
To replace the battery of the remote con-
troller:
71LMT0201
1) Pull the key out from the remote con-
troller.
2) Insert a flat blade screwdriver covered
with a soft cloth in the slot of the remote
controller and pry it open.
68LM210
(1) Lithium disc type battery:
CR2032 or equivalent
3) Replace the battery (1) so its + terminal
faces the bottom of the case as shown
in the illustration.
4) Close the remote controller firmly.
5) Make sure the door locks can be oper-
ated with the remote controller.
6) Dispose of the used battery properly
according to applicable rules or regula-
tions. Do not dispose of lithium batter-
ies with ordinary household trash.
NOTICE
: K H Q U H S O D F L Q J W K H E D W W H U \ G R Q R W
W R X F K W K H H O H F W U R Q L F F R P S R Q H Q W L Q W K H
U H P R W H F R Q W U R O O H U Z L W K Z H W R U R L O
V W D L Q H G K D Q G V 2 W K H U Z L V H W K H U H P R W H
F R Q W U R O O H U P D \ E H G D P D J H G
: $ 5 1 , 1 *
6 Z D O O R Z L Q J D O L W K L X P E D W W H U \ P D \
F D X V H V H U L R X V L Q W H U Q D O L Q M X U \ ' R Q R W
D O O R Z D Q \ R Q H W R V Z D O O R Z D O L W K L X P
E D W W H U \ . H H S O L W K L X P E D W W H U L H V D Z D \
I U R P F K L O G U H Q D Q G S H W V , I V Z D O O R Z H G
F R Q W D F W D S K \ V L F L D Q L P P H G L D W H O \
(1)
Page 33 of 288
![SUZUKI NEXA 2015 1.G Owners Manual Downloaded from www.Manualslib.com manuals search engine
% ( ) 2 5 ( 5 , 9 , 1 *
0 6 (
5 H S O D F H P H Q W R I W K H E D W W H U \
If the transmitter becomes unreli](/manual-img/20/7598/w960_7598-32.png "SUZUKI NEXA 2015 1.G Owners Manual Downloaded from www.Manualslib.com manuals search engine
% ( ) 2 5 ( 5 , 9 , 1 *
0 6 (
5 H S O D F H P H Q W R I W K H E D W W H U \
If the transmitter becomes unreli")
Downloaded from www.Manualslib.com manuals search engine
% ( ) 2 5 ( ' 5 , 9 , 1 *
0 6 (
5 H S O D F H P H Q W R I W K H E D W W H U \
If the transmitter becomes unreliable,
replace the battery.
To replace the battery of the transmitter:
68LM248
1) Remove the screw (1), and open the
transmitter cover.
2) Remove the transmitter (2).
64MS197
(4) Lithium disc type battery:
CR1620 or equivalent
3) Put the edge of a flat blade screwdriver
in the slot of the transmitter (2) and pry
it open.
4) Hold the cover around the electric com-
ponent (3), insert a precision screw-
driver covered with insulating tape in
the space between the cover and the
component, and then remove the com-
ponent.
5) Replace the battery (4) so its + terminal
faces the “ ” mark of the transmitter.
Insert the battery all the way into the
holder.
6) Close the transmitter and install it into
the transmitter holder.
7) Close the transmitter cover, install and
tighten the screw (1).
8) Make sure the door locks can be oper-
ated with the transmitter.9) Dispose of the used battery properly
according to applicable rules or regula-
tions. Do not dispose of lithium batter-
ies with ordinary household trash.
NOTE:
Used batteries must be disposed properly
according to applicable rules or regulations
and must not be disposed with ordinary
household trash.
NOTICE
: K H Q U H S O D F L Q J W K H E D W W H U \ G R Q R W
W R X F K W K H H O H F W U R Q L F F R P S R Q H Q W L Q W K H
W U D Q V P L W W H U Z L W K Z H W R U R L O V W D L Q H G
K D Q G V 2 W K H U Z L V H W K H W U D Q V P L W W H U P D \
E H G D P D J H G
(1)
(2)
(2)
(3)
(4)
: $ 5 1 , 1 *
6 Z D O O R Z L Q J D O L W K L X P E D W W H U \ P D \
F D X V H V H U L R X V L Q W H U Q D O L Q M X U \ ' R Q R W
D O O R Z D Q \ R Q H W R V Z D O O R Z D O L W K L X P
E D W W H U \ . H H S O L W K L X P E D W W H U L H V D Z D \
I U R P F K L O G U H Q D Q G S H W V , I V Z D O O R Z H G
F R Q W D F W D S K \ V L F L D Q L P P H G L D W H O \
NOTICE
7 K H W U D Q V P L W W H U L V D V H Q V L W L Y H H O H F
W U R Q L F L Q V W U X P H Q W 7 R D Y R L G G D P D J L Q J
L W G R Q R W H [ S R V H L W W R G X V W R U P R L V
W X U H R U W D P S H U Z L W K L Q W H U Q D O S D U W V
Page 35 of 288
Downloaded from www.Manualslib.com manuals search engine
% ( ) 2 5 ( ' 5 , 9 , 1 *
0 6 (
outside, or using the door lock knobs or
the central door locking switch from
inside.
• If any door is not operated within approx-
imately 30 seconds after the doors have
been unlocked using the keyless entry
system transmitter, keyless push start
system remote controller or request
switch, the doors are automatically
locked again. When the doors are
locked, the security system will be
armed in about 5 seconds if the system
is in the enabled state.
• If the security system indicator (1) blinks
when the ignition switch is in the “ON”
position or the ignition mode is “ON”,
there may be something wrong with the
security system. Ask your
D X W K R U L V H G 0 D U X W L 6 X ] X N L Z R U N V K R S to
inspect the system.
+ R Z W R G L V D U P W K H V H F X U L W \ V \ V W H P
Simply unlock the doors using the keyless
entry system transmitter, keyless push
start system remote controller or request
switch. The security system indicator will
go out, indicating that the security system
is disarmed.
+ R Z W R V W R S W K H D O D U P
Should the alarm be triggered accidentally,
unlock the doors using the keyless entry
system transmitter, keyless push start sys-
tem remote controller or request switch, or
insert the key in the ignition switch and turn
it to “ON” position, or press the engineswitch to change the ignition mode to
“ON”. The alarm will then stop.
NOTE:
• Even after the alarm has stopped, if you
lock the doors using the keyless entry
system transmitter, keyless push start
system remote controller or request
switch, the security system will be
rearmed with a delay of about 5 sec-
onds.
• If you disconnect the battery while the
security system is in the armed condition
or the alarm is actually in operation, the
alarm will be re-triggered when the bat-
tery is then reconnected.
• Even after the alarm has stopped at the
end of the predetermined operation time,
it will be triggered again if any of the
doors or engine hood is opened, or the
vehicle feels a shock (if the shock sen-
sor is in the enabled state), without dis-
arming the security system.
& K H F N L Q J Z K H W K H U W K H D O D U P K D V E H H Q
W U L J J H U H G G X U L Q J S D U N L Q J
If the alarm was triggered and you then
turn the ignition switch to “ON” position, or
press the engine switch to change the igni-
tion mode to “ON”, the security system
indicator will blink rapidly for about 8 sec-
onds and a buzzer will beep 4 times during
this period. If this happens, check whether
the vehicle has been broken into while you
were away from it. ( Q D E O L Q J D Q G G L V D E O L Q J W K H V H F X U L W \
V \ V W H P
The security system can be either enabled
or disabled.
: K H Q H Q D E O H G
• If any of the doors are opened without
unlocking by the keyless entry system
transmitter, keyless push start system
remote controller or request switch, all
turn signal lights start to blink and the
interior buzzer beeps intermittently. After
5 seconds, the siren will sound for about
27.5 seconds. The security system indi-
cator continues to blink during this time.
• If the engine hood is opened, all turn sig-
nal lights blink, and the siren sounds for
about 27.5 seconds. The security sys-
tem indicator continues to blink during
this time.
( , I W K H V K R F N V H Q V R U L V L Q W K H H Q D E O H G
V W D W H
• If the vehicle feels a shock, the siren
sounds for about 2 seconds (pre-warn-
ing). If the vehicle continues to feel a
shock, all turn signal lights start to blink
and the interior buzzer beeps intermit-
tently. After 5 seconds, the siren will
sound for about 27.5 seconds (full blast
warning). The security system indicator
continues to blink during this time.
NOTE:
If you set the full blast warning sensitivity
higher than the pre-warning sensitivity in
the setting mode of the information display,
or the vehicle feels such shock as to be
Page 39 of 288
Downloaded from www.Manualslib.com manuals search engine
% ( ) 2 5 ( ' 5 , 9 , 1 *
0 6 (
NOTE:
Even if you cannot close the window by the
auto-up feature because there may be
something wrong with the pinching preven-
tion function, you can close the window by
holding the window switch in the up posi-
tion.If you drive in extreme off-road condition,
the pinching prevention function may oper-
ate accidentally because the window react
to vehicle jolting. 7 K H 3 L Q F K L Q J 3 U H Y H Q W L R Q ) X Q F W L R Q , Q L
W L D O L ] D W L R QWhen you disconnect and re-connect the
battery or replace the fuse, the function will
be deactivated. In this condition, the auto-
down feature will be deactivated, while the
auto-up feature may remain being activated.
The pinching prevention function needs to
be initialized.To initialize the pinching prevention func-
tion, use the following procedure:
1) Turn the ignition switch to the “ON”
position or press the engine switch to
change the ignition mode to “ON”.
2) Open the driver’s window fully by hold-
ing the window switch in the “DOWN”
position.3) Close the driver’s window by holding the
switch in the “UP” position, and keep
holding the switch for 2 seconds after the
window fully closed.4) Check the driver’s window if the auto-
down/up feature work.If the auto-down/up feature would not work
after initialization, there might be some-
thing wrong with the pinching prevention
function. Have your vehicle inspected by
an D X W K R U L V H G 0 D U X W L 6 X ] X N L Z R U N V K R S.
0 L U U R U V , Q V L G H 5 H D U Y L H Z 0 L U U R U
68LMT0205
68LMT0206
(2) Day driving
(3) Night driving
You can adjust the inside rearview mirror
by hand so as to see the rear of your vehi-
cle in the mirror. To adjust the mirror, set
the selector tab (1) to the day position,
then move the mirror up, down or sideways
by hand to obtain the best view.
: $ 5 1 , 1 *
: K H Q H Y H U \ R X G L V F R Q Q H F W D Q G U H F R Q
Q H F W W K H E D W W H U \ R U U H S O D F H W K H I X V H
W K H S L Q F K L Q J S U H Y H Q W L R Q I X Q F W L R Q
Q H H G V W R E H L Q L W L D O L ] H G
7 K H S L Q F K L Q J S U H Y H Q W L R Q I X Q F W L R Q Z L O O
Q R W E H D F W L Y D W H G X Q W L O W K H L Q L W L D O L ] D W L R Q
F R P S O H W H
(1)
(2)(3)
Page 66 of 288
Downloaded from www.Manualslib.com manuals search engine % ( ) 2 5 ( ' 5 , 9 , 1 *
0 6 (
7 H P S H U D W X U H * D X J H
64MS046
When the ignition switch is in the “ON”
position or the ignition mode is “ON”, this
gauge indicates the engine coolant tem-
perature. Under normal driving conditions,
the indicator should stay within the normal,
acceptable temperature range between
“H” and “C”. If the indicator approaches
“H”, overheating is indicated. Follow the
instructions for engine overheating in the
³ ( 0 ( 5 * ( 1 & < 6 ( 5 9 , & ( ´ section.
% U L J K W Q H V V & R Q W U R O
61MM0A156
When the ignition switch is turned to the
“ON” position or the engine switch is
pressed to change the ignition mode to
“ON”, the instrument cluster lights come
on.
Your vehicle has a system to automatically
dim the brightness of the instrument panel
lights when the position lights or headlights
are on.
You can change the brightness of the
instrument panel lights regardless of
whether the position lights or headlights
are off or on.
To increase the brightness of the instru-
ment panel lights, turn the indicator selec-
tor knob (1) clockwise.
To reduce the brightness of the instrument
panel lights, turn the indicator selector
knob (1) counterclockwise.NOTE:
•If you do no
t turn the knob for more than
5 seconds while activating the bright-
ness control, the brightness control dis-
play will be canceled automatically.
• When you reconnect the battery, the
brightness of the instrument panel lights
will be reinitialized. Readjust the bright-
ness according to your preference.
NOTE:
If you select the high brightness level when
the position lights or headlights are on, the
instrument panel lights are not dimmed.
NOTICE
& R Q W L Q X L Q J W R G U L Y H W K H Y H K L F O H Z K H Q
H Q J L Q H R Y H U K H D W L Q J L V L Q G L F D W H G F D Q
U H V X O W L Q V H Y H U H H Q J L Q H G D P D J H ( ; $ 0 3 / (
( ; $ 0 3 / (
: $ 5 1 , 1 *
, I \ R X D W W H P S W W R D G M X V W W K H E U L J K W
Q H V V R I W K H L Q V W U X P H Q W S D Q H O O L J K W V
Z K L O H G U L Y L Q J \ R X F R X O G O R V H F R Q W U R O
R I W K H Y H K L F O H
' R Q R W D W W H P S W W R D G M X V W W K H E U L J K W
Q H V V R I W K H L Q V W U X P H Q W S D Q H O O L J K W V
Z K L O H G U L Y L Q J
(1)