Page 258 of 288
Downloaded from www.Manualslib.com manuals search engine , 1 6 3 ( & 7 , 2 1 $ 1 ' 0 $ , 1 7 ( 1 $ 1 & (
0 6 (
) R U Z L Q G V K L H O G Z L S H U V
70G119
1) Hold the wiper arm away from the win-
dow.
NOTE:
When raising both of the front wiper arms,
pull the driver’s side wiper arm up first.
When returning the wiper arms, lower the
passenger’s side wiper arm first.
Otherwise, the wiper arms may interfere
with each other.
54G130
2) Squeeze lock (1) towards wiper arm (2)
and remove the wiper frame from the
arm as shown.
3) Unlock the lock end of the wiper blade
and slide the blade out as shown. 5 H P R Y D O
60A260
, Q V W D O O D W L R Q
54G132
(1) Locked end
( ; $ 0 3 / (
Page 259 of 288
Downloaded from www.Manualslib.com manuals search engine
, 1 6 3 ( & 7 , 2 1 $ 1 ' 0 $ , 1 7 ( 1 $ 1 & (
0 6 (
54G135
(1) Retainer
4) If the new blade is provided without the
two metal retainers, move them from
the old blade to the new one.
60MH07160MH072
(A) Up
(B) Down
NOTE:When you install the metal retainers (3),
make sure the direction of metal retainers
as shown in the above illustrations.
5) Install the new blade in the reverse order
of removal, with the locked end posi-
tioned toward the wiper arm.
Make sure the blade is properly retained
by all the hooks. Lock the blade end into
place.6) Reinstall wiper frame to arm, making
sure that the lock lever is snapped
securely into the arm. ) R U U H D U Z L S H U V
80G146
1) Hold the wiper arm away from the win-
dow.
2) Remove the wiper frame from the arm
as shown.
3) Slide the blade out as shown.
(3)
(3)
( ; $ 0 3 / (
(3)(A)
(B)
( ; $ 0 3 / (
( ; $ 0 3 / (
Page 264 of 288
Downloaded from www.Manualslib.com manuals search engine ( 0 ( 5 * ( 1 & < 6 ( 5 9 , & (
0 6 (
7 L U H & K D Q J L Q J 7 R R O
61MM0B100
(1) Spare tire
(2) Jack
(3) Jack handle
(4) Wheel Brace
(5) Luggage Compartment Board
The tire changing tools are stowed in the luggage compartment.
(3) (4) (2)
(5)
(1)
( ; $ 0 3 / (
64MS142
To remove the spare tire, turn its bolt (1)
counterclockwise and remove it.
: $ 5 1 , 1 *
$ I W H U X V L Q J W K H W L U H F K D Q J L Q J W R R O V E H
V X U H W R V W R Z W K H P V H F X U H O \ R U W K H \
F D Q F D X V H L Q M X U \ L I D Q D F F L G H Q W
R F F X U V
& $ 8 7 , 2 1
7 K H M D F N V K R X O G E H X V H G R Q O \ W R
F K D Q J H Z K H H O V , W L V L P S R U W D Q W W R U H D G
W K H M D F N L Q J L Q V W U X F W L R Q V L Q W K L V V H F
W L R Q E H I R U H D W W H P S W L Q J W R X V H W K H
M D F N
(1)
( ; $ 0 3 / (
Page 265 of 288
Downloaded from www.Manualslib.com manuals search engine
( 0 ( 5 * ( 1 & < 6 ( 5 9 , & (
0 6 (
- D F N L Q J , Q V W U X F W L R Q V
75F062
1) Place the vehicle on level, hard ground.
2) Set the parking brake firmly and shift
into “R” (Reverse).
3) Turn on the hazard warning flasher if
your vehicle is near traffic.
4) Block the front and rear of the wheel
diagonally opposite of the wheel being
lifted.5) Place the spare wheel near the wheel
being lifted as shown in the illustration
in case that the jack slips.
54G253
63J10063J101
6) Position the jack at an angle as shown
in the illustration and raise the jack by
turning the jack handle clockwise until
the jack-head groove fits around the
jacking bar beneath the vehicle body.
7) Continue to raise the jack slowly and
smoothly until the tire clears the
ground. Do not raise the vehicle more
than necessary.
: $ 5 1 , 1 *
Page 269 of 288
Downloaded from www.Manualslib.com manuals search engine
( 0 ( 5 * ( 1 & < 6 ( 5 9 , & (
0 6 (
4) If the booster battery you are using is fit-
ted to another vehicle, start the engine of
the vehicle with the booster battery. Run
the engine at moderate speed.5) Start the engine of the vehicle with the
flat battery.
6) Remove the jump leads in the exact
reverse order in which you connected
them.
7 R Z L Q JIf you need to have your vehicle towed,
contact a professional service. Your dealer
can provide you with detailed towing
instructions.
: K H H O ' U L Y H : ' 0 D Q X D O 7 U D Q
V D [ O HManual transaxle vehicles may be towed
using either of the following methods.
1) From the front, with the front wheels
lifted and the rear wheels on the ground.
Before towing, make sure that the park-
ing brake is released.
2) From the rear, with the rear wheels lifted
and the front wheels on the ground, pro-
vided the steering and drivetrain are in
operational condition. Before towing,
make sure that transaxle is in neutral,
the steering wheel is unlocked (vehicle
without keyless push start system - the
ignition key should be in the “ACC” posi-
tion) (vehicle with keyless push start sys-
tem - the ignition mode is ACC), and the
steering wheel is secured with a clamp-
ing device designed for towing service.
& $ 8 7 , 2 1
& R Q Q H F W W K H M X P S O H D G W R W K H H Q J L Q H
P R X Q W E U D F N H W V H F X U H O \ , I W K H M X P S
O H D G G L V F R Q Q H F W V I U R P W K H H Q J L Q H
P R X Q W E U D F N H W E H F D X V H R I Y L E U D W L R Q D W
W K H V W D U W R I W K H H Q J L Q H W K H M X P S O H D G
F R X O G E H F D X J K W L Q W K H G U L Y H E H O W V
NOTICE
2 E V H U Y H W K H I R O O R Z L Q J L Q V W U X F W L R Q V
Z K H Q W R Z L Q J \ R X U Y H K L F O H
Page 272 of 288
Downloaded from www.Manualslib.com manuals search engine ( 0 ( 5 * ( 1 & < 6 ( 5 9 , & (
0 6 (
MHO-07-014
• Remove the warning triangle carefully
from the cover as shown by arrow 1.
• Open both the reflector arms as shown
by arrow and lock the arms with each
other with the clip provided in the right
arm. Open the bottom stand in counter
clock-wise direction as shown by arrow
3. Position the warning triangle behind
the vehicle on a plain surface.
• Reverse the removal procedure for keep-
ing inside the cover.
MHO-07-014
Page 280 of 288
Downloaded from www.Manualslib.com manuals search engine * ( 1 ( 5 $ / , 1 ) 2 5 0 $ 7 , 2 1
0 6 (
9 H K L F O H , G H Q W L I L F D W L R Q & K D V V L V 6 H U L D O 1 X P E H U
79MH0A01
64MS179
The chassis and/or engine serial numbers
are used to register the vehicle. They arealso used to assist your dealer when
ordering or referring to special service
information. Whenever you have occasion
to consult your D X W K R U L V H G 0 D U X W L
6 X ] X N L Z R U N V K R S, remember to iden-tify
your vehicle with this number. Should
you find the number difficult to read, you
will also find it on the identification plate.
( Q J L Q H 6 H U L D O 1 X P E H U
60G128
The engine serial number is stamped on
the cylinder block as shown in the
illustration.
( ; $ 0 3 / (
( ; $ 0 3 / (
Page 286 of 288
Downloaded from www.Manualslib.com manuals search engine 6 3 ( & , ) , & $ 7 , 2 1 6
0 6 (
*1 When tire replacement is necessary and if the specified load index and speed rated tire is not available, then use a tire of higher load
index and speed rating.
*2: The spare wheel provided with alloy wheel variant is steel wheel rim, hence follow 4 tire rotation only.
(Refer: Section
“Inspection and maintenance”)
, 7 ( 0 : K H H O V D Q G 7 L U H V
Tire size, front and rear
205/60R16 92H
*1*2
Tire size, spare
205/60R16 92H
*2 (Steel wheel)
Rim size 205/60R16 tire: 16X6J
Tire pressures For the specified tire pressure, see the Tire Information Label located
on the driver’s door lock pillar.
, 7 ( 0 5 H F R P P H Q G H G ) X H O / X E U L F D Q W V D Q G & D S D F L W L H V D S S U R [
Fuel 48 L
Engine oil D13A 3.2 L (replacement with oil filter)
D16AA 5.25 L (replacement with oil filter)
Engine coolant D13A 6.0 L (including reservoir tank)
D16AA 5.5 L (including reservoir tank)
Manual transaxle oil 5M/T 2.6 L
6M/T 2.1 L
Brake fluid / Clutch fluid Refill to the proper oil level according to the instructions in the “INSPEC-
TION AND MAINTENANCE” section.
