2015 SUZUKI NEXA window

Downloaded from www.Manualslib.com manuals search engine 
27+(5&21752/6$1'(48,30(17
06(
6XQ9LVRU
77PH004
The sun visors can be pulled down to block
glare coming through the windshield, or
they can be unhooked and turned to the
side to block glare coming through the side
window.
&DUGKROGHULIHTXLSSHG7\ S H  $
67LH064
7\ S H  %
64MS172
(1) Card holder
(2) Mirror cover
You can put a card in the card holder (1) on
the back of the sun visor.
9DQLW\PLUURULIHTXLSSHG
64MS076
(3) Vanity mirror
(4) Vanity mirror light (if equipped)
To use the vanity mirror (3) on the back of
the sun visor, pull up the mirror cover (1).
The vanity mirror light (4) comes on when
the mirror cover (1) is opened.
NOTICE
:KHQ XQKRRNLQJ DQG KRRNLQJ D VXQ
YLVRUEHVXUHWRKDQGOHLWE\WKHKDUG
SODVWLF SDUW RU WKH VXQ YLVRU PD\ JHW
GDPDJHG
(;$03/(
NOTICE
:KHQ\RXSDUN\RXUYHKLFOHRXWGRRUV
LQ GLUHFW VXQOLJKW RU LQ KRW ZHDWKHU
GRQRWOHDYHSODVWLFFDUGVLQWKH
KROGHU7KHKHDWPD\GLVWRUWWKHP
(1)
(;$03/((2)
(1)
(;$03/(
:$ 5 1 , 1 *

Downloaded from www.Manualslib.com manuals search engine 
27+(5&21752/6$1'(48,30(17
06(
+HDGFRROHG)HHWZDUPHGKHDWLQJSelect the BI-LVEL position (b) and “FRESH
AIR” position (f), the temperature selector to
the desired temperature position, and the
blower speed selector to the desired blower
speed position. Unless the temperature
selector is in the fully COLD position or fully
HOT position, the air that comes out of the
center and side outlets will be cooler than
the air that comes out of the floor outlets.1RUPDOFRROLQJSet the air flow selector to the VENTILATION
position (a), the temperature selector to the
desired temperature position and the blower
speed selector to the desired blower speed
position, and push in the air conditioning
switch (5) to turn on the air conditioning sys-
tem. Setting the blower speed selector to a
higher blower speed position increases cool-
ing efficiency.
You can switch the air intake selector to
either the “FRESH AIR” position (f) or
RECIRCULATED AIR position (g) as you
desire. Choosing the RECIRCULATED AIR
position (g) increases cooling efficiency.
4XLFNFRROLQJXVLQJUHFLUFXODWHGDLUThe control settings are the same as for
normal cooling except selecting the RECIR-
CULATED AIR position (g) and the highest
blower speed.NOTE:• If you select the recirculated air position
(g) for an extended period of time, the air
in the vehicle can become contaminated.
Therefore, you should occasionally select
the “FRESH AIR” position (f).
• If your vehicle has been left in the sun
with the windows closed, it will cool faster
if you open the windows briefly while you
operate the air conditioner with the air
intake selector at the “FRESH AIR” posi-
tion (f) and the blower at high speed.
'HKXPLGLI\LQJSet the air flow selector to a desired air flow
selector position, the temperature selector
to the desired temperature position and the
blower speed selector to the desired blower
speed position. Also select the “FRESH
AIR” position (f) and push in the air condi-
tioning switch (5) to turn on the air condi-
tioning system.NOTE:Because the air conditioner dehumidifies
the air, turning it on will help keep the win-
dows clear, even when blowing heated air
using the DEFROST position (e) or HEAT &
DEFROST position (d).
64MS091
NOTE:
If you need maximum defrosting:
• select the DEFROST position (e) and
“FRESH AIR” position (f),
• set the blower speed selector to HIGH,(;$03/(

Downloaded from www.Manualslib.com manuals search engine 27+(5&21752/6$1'(48,30(17
06(
• adjust the temperature selector to the
HOT end,
• push in the air conditioning switch (5) to
turn on the air conditioning system, and
• adjust the side outlets so the air blows
on the side windows.0DLQWHQDQFHIf you do not use the air conditioner for a
long period, such as during winter, it may
not give the best performance when you
start using it again. To help maintain opti-
mum performance and durability of your air
conditioner, it needs to be run periodically.
Operate the air conditioner at least once a
month for one minute with the engine idling.
This circulates the refrigerant and oil and
helps protect the internal components.If your air conditioner is equipped with air
filters, clean or replace them as specified
in the “Maintenance Schedule” in the
“,163(&7,21 $1' 0$,17(1$1&(

Downloaded from www.Manualslib.com manuals search engine 27+(5&21752/6$1'(48,30(17
06(
$LUFRQGLWLRQLQJVZLWFK
64MS055
The air conditioning switch (6) is used to
turn on and off the air conditioning system
only when the blower is on. To turn on the
air conditioning system, push in the switch;
“A/C” will appear on the display and the
indicator on the switch will come on. To turn
off the air conditioning system, push in the
switch again; “A/C” and the indicator will go
off.You can use the air conditioning switch (6)
to manually turn the air conditioner on or off
according to your preference. When you
turn the air conditioning switch off, the cli-
mate control system cannot lower the
inside temperature below outside tempera-
ture.
6\VWHP2SHUDWLQJ,QVWUXFWLRQV$XWRPDWLFRSHUDWLRQ
64MS056
You can let the climate control system
work automatically. To set the system for
fully-automatic operation, follow the proce-
dure below.
1) Start the engine.
2) Push the “AUTO” switch (8).
3) Set the desired temperature by turning
the temperature selector (1).
The blower speed, air intake and air flow
are controlled automatically to maintain the
set temperature. However, the air flow is
not changed to the defrost position auto-
matically.
To turn the climate control system off, push
the “OFF” switch (7).NOTE:
If the “AUTO” on the display blinks, there is
a problem in the heating system and/or air
conditioning system. You should have the
system inspected by an DXWKRULVHG0DUXWL
6X]XNLZRUNVKRS.
NOTE:
• To find the temperature at which you are
most comfortable, start with the 25°C
(75°F) setting, for example.
• If you turn the temperature selector (1)
until “HI” or “LO” appears on the display,
the climate control system will operate at
maximum heating or cooling.
• To avoid blowing cold air in cold weather
or hot air in hot weather, the system will
delay turning on the blower until warmed
or chilled air is available.
• If your vehicle has been left in the sun
with the windows closed, it will cool
faster if you open the windows briefly.
• Even under automatic operation, you
can set individual selectors to the man-
ual mode. The manually selected func-
tions are maintained, and the other
functions remain under automatic opera-
tion.
• If the windshield and/or the front door
windows are fogged, push the defrost
switch (5) to turn on the defroster, or
push the “MODE” switch (4) to change
the air flow to the heat & defrost position
(f) to defog the windows.
A/C
(6)
02
(8)
(7)
2))$872

Downloaded from www.Manualslib.com manuals search engine 
27+(5&21752/6$1'(48,30(17
06(
• To return the blower speed selector (2),
air intake selector (3), and “MODE”
switch (4) to automatic operation, push
the “AUTO” switch (8).
64MS149
Be careful not to cover the interior tem-
perature sensor (10) located between the
steering wheel and the climate control
panel, or the solar sensor (11) located at
the top of the central part of the dash-
board. These sensors are used by the
automatic system to regulate temperature.
0DQXDORSHUDWLRQ
You can manually control the climate con-
trol system. Set the selectors to the
desired positions.
64MS091
NOTE:
If you need maximum defrosting:
• push the defrost switch (5) to turn on the
defroster (the air conditioning system will
come on and the fresh air position (b)
will be selected automatically),
• set the blower speed selector to HIGH,
• adjust the temperature selector to the
“HI” indication on the display, and
• adjust the side outlets so the air blows
on the side windows.
0DLQWHQDQFHIf you do not use the air conditioner for a
long period, such as during winter, it may
not give the best performance when you
start using it again. To help maintain opti-
mum performance and durability of your air
conditioner, it needs to be run periodically.
Operate the air conditioner at least once a
month for one minute with the engine
idling. This circulates the refrigerant and oil
and helps protect the internal components.
If your air conditioner is equipped with air
filters, clean or replace them as specified
in the “Maintenance Schedule” in the

Downloaded from www.Manualslib.com manuals search engine 27+(5&21752/6$1'(48,30(17
06(
'LVSOD\FKDQJH
Press the DISP button (6).
Each time the button is pressed, display
will change as follows:
NOTE:
• “NO TITLE” will be displayed when there
is no text information in the disc currently
being played.
• If text data contains more than 12 char-
acters, the “>” mark will appear at the
right end. Holding down the DISP button
(6) for 1 second or longer can display the
next page.
1RWHVRQ03:0$$$&:KDWLV03"
• MP3 (MPEG audio layer3) is an audio
compression format that has become
the standard format among PC users. Its
merit is that the original audio data is
compressed to approximately 1/10 and
high sound quality is maintained. This
means that it is possible to store the data
of approximately 10 music CDs on a sin-
gle CD-R/RW disc, which in turn makes
it possible to play music for a long time
without having to change the disc.
:KDWLV:0$"
• An abbreviation of “Windows Media
Audio,” WMA is an audio compression
format developed by Microsoft.
• WMA files for which the DRM (Digital
Rights Management) function is ON can-
not be played.
• Windows Media
TM
and the Windows
®
logo are trademarks or registered trade-
marks of Microsoft Corporation in the
United States and other countries.
:KDWLV$$&"
• An abbreviation of “Advanced Audio
Coding,” AAC is an audio compression
format used by MPEG2 and MPEG4.3RLQWV WR UHPHPEHU ZKHQ PDNLQJ 03
:0$$$&ILOHV
Common
• High bit rate and high sampling fre-
quency are recommended for high qual-
ity sounds.
• Selecting VBR (Variable Bit Rate) is not
recommended. Selecting VBR may
cause display of incorrect playing time
and jumpiness of playback.
• Playback sound quality varies depend-
ing on the encoding environment. For
details, refer to the user manual of the
encoding software and the writing soft-
ware in use. Play time
Folder name
File name
Album name (MP3, AAC only)
Track title
Artist name
NOTICE
1HYHU DVVLJQ WKH

Downloaded from www.Manualslib.com manuals search engine 7-23INSPECTION AND MAINTENANCE
64MS0-74E
*Feature not available in the vehicle.
81A283
PRIMARY FUSE
(1) – Blank
(2) 20 A Power window timer
(3) 15 A Steering lock
(4) 20 A Rear defogger(5)
20 A
Sunroof*
(6)
10 A
DRL*
(7)
10 A
Heated mirror*
(8) 7.5 A Starting signal
(9) 15 A Accessory socket 2
(10) 30 A Power window
(11) 10 A Hazard
(12) 7.5 A BCM
(13) 15 A Ignition coil
(14) 10 A ABS control module
(15) 15 A Accessory socket
(16)
10 A
A-STOP controller*
(17) 15 A Horn
(18) 10 A Stop light
(19) 10 A Air bag
(20) 10 A Back-up light
(21) 15 A Wiper / Washer
(22) 30 A Front wiper
(23) 10 A Dome light(24)
15 A
4WD*
(25)
7.5 A
RR fog lamp*
(26) – Blank
(27) 7.5 A Ignition-1 signal
(28) 15 A Radio 2
(29) 10 A Accessory socket 3
(30) 15 A Radio
(31) 10 A Tail lamp
(32) 20 A D/L
(33) 7.5 A Cruise control
(34) 10 A Meter
(35) 7.5 A Ignition-2 signal
(36)
20 A
Seat heater*
WA R N I N G
Always be sure to replace a blown
fuse with a fuse of the correct amper-
age. Never use a substitute such as
aluminum foil or wire to replace a
blown fuse. If you replace a fuse and
the new one blows in a short period of
time, you may have a major electrical
problem. Have your vehicle inspected
immediately by your DXWKRULVHG
0DUXWL6X]XNLZRUNVKRS.
BLOWN OK