2015 Peugeot RCZ isofix

111
RCZ_en_Chap05_securite_ed01-2015
"ISOFIx" MOUNTINGS
Your vehicle has been approved to the latest ISOFI x regulations.
The seats represented below are fitted with regulation ISOFIX
mountings:
These are three rings for each seat:
-


two rings
A, located between the vehicle seat back and cushion,
indicated by a label,
-

a ring
B referred to as the TOP TETHER, located under a cover
behind
the top of the backrest for fixing the upper strap.This
ISOFIX mounting system provides fast, reliable and safe fitting of
the child seat in your vehicle.
The

ISOFIX child seats

are fitted with two latches which are secured
easily on the two rings A

.
Some also have an upper strap which is attached to ring B.
To secure the child seat to the TOP TETHER:
-

open the cover at the top of the backrest,
-

fix the hook on the upper strap to the ring
B
,
-

tighten the upper strap.
The incorrect installation of a child seat in a vehicle compromises
the child's protection in the event of an accident.
Observe

strictly the fitting instructions in the installation guide
provided with the child seat.
For information regarding the possibilities for installing ISOFI

x
child seats in your vehicle, refer to the table.
5/
SAFETY

11 2
RCZ_en_Chap05_securite_ed01-2015
ISOFIx CHILD SEAT
This child seat can also be used on seats which are not fitted with ISOFIX mountings.
In this case, it must be attached to the vehicle seat using the three po\
int seat belt.
Adjust the front seat of the vehicle so that the child's feet do not tou\
ch the backrest.
Follow
the instructions for fitting the child seat given in the seat manufacturer's installation guide.
RECOMMENdEd BY PEUGEOT ANd APPROVE d FOR YOUR VEHICLE
ISOFIx child seat with TOP TETHER
RÖMER d uo Plus ISOFIX
(size category B1)
Group 1: from 9 to 18 kg
Installed only in the forward facing position.
Is attached to the rings A, as well as the ring B, referred to as the TOP TETHER,
using an upper strap.
Three seat body angles: sitting, reclining, lying.

11 3
RCZ_en_Chap05_securite_ed01-2015
LOCATIONS FOR FITTING ISOFIx
CHILD
SEATS
In accordance with European Regulations, this table indicates the options for installing ISOFIX child seats on seats in the vehicle fitted with ISOFIX mountings.
In the case of universal and semi-universal ISOFI
x child seats, the ISOFI x size category, determined by a letter from A to G, is indicated on the
child seat next to the ISOFI
x logo. Weight of the child / indicative age
Less than 10 kg (group 0)
Up to approx. 6 months Less than 10 kg
(group 0)
Less than 13 kg (group 0+)
Up to approx. 1 year From 9 to 18 kg
(group 1)
From approx. 1 to 3 years
Type of ISOFIX child seat Infant car seat*rearward facing rearward facing forward facing
ISOFIX size category FG C
dE CdA B B1
ISOFIX universal and semi-
universal child seats which can be
installed on the

outer rear seats X
XXIUF
IUF: seat suitable for the installation of an Isofix
Universal Forward facing child seat with a top tether.
It may be necessary to move the front seat forwards to facilitate the in\
stallation of a child seat on a rear seat.
X:

seat which is not suitable for the installation of an ISOFI x seat of the size category indicated.
* Infant car seats and "car" cots cannot be installed on the front passe\
nger seat.
5/
SAFETY