2015 Peugeot RCZ driver seat adjustment

53
RCZ_en_Chap03_confort_ed01-2015
STORING DRIVING POSITIONS
System which takes into account the electrical settings of the driver's \
seat and the door mirrors. It enables you to store two positions using
the buttons on the side of the driver's seat.
STORING A POSITION
Using buttons M / 1 / 2
F Switch on the ignition.
F
Adjust your seat and your door mirrors.
F


Press button
M, then press button 1 or 2 within four seconds.
An audible signal is heard indicating that the settings have been
stored.
RECALLING A STORE d POSITION
Storing a new position cancels the previous position.
Using button 1 or 2
F Press and hold button 1 or 2 until the audible signal is heard
indicating the end of the adjustment.
When the ignition is off, after a few consecutive position recalls,
the function will be deactivated until the engine is started,
to
prevent discharging of the battery.
3/
EASE OF USE and COMFORT

98
RCZ_en_Chap05_securite_ed01-2015
The driver must ensure that passengers use the seat belts
correctly and that they are all restrained securely before setting
off.
Wherever you are seated in the vehicle, always fasten your seat
belt, even for short journeys.
Do not interchange the seat belt buckles as they will not fulfil their
role fully

.
The
seat belts are fitted with an inertia reel permitting automatic
adjustment of the length of the strap to your size.

The seat belt is
stowed automatically when not in use.
Before and after use, ensure that the seat belt is reeled in
correctly.
The lower part of the strap must be positioned as low as possible
on the pelvis.
The upper part must be positioned in the hollow of the shoulder.
The
inertia reels are fitted with an automatic locking device which
comes into operation in the event of a collision, emergency
braking or if the vehicle rolls over

. You can release the device
by
pulling the strap firmly and then releasing it so that it reels in
slightly

.
In order to be effective, a seat belt must:
-

be tightened as close to the body as possible,
-


be pulled in front of you with a smooth movement, checking
that it does not twist,
-


be used to restrain only one person,
-


not bear any trace of cuts or fraying,
-

not be converted or modified to avoid affecting its
performance. In accordance with current safety regulations, for all repairs on your
vehicle's

seat belts, go to a qualified workshop with the skills and
equipment

needed, which a PEUGEOT

dealer is able to provide.
Have your seat belts checked regularly by a PEUGEOT dealer or a
qualified
workshop, particularly if the straps show signs of damage.
Clean the seat belt straps with soapy water or a textile cleaning
product, sold by PEUGEOT dealers.
After folding or moving a seat or rear bench seat, ensure that the
seat belt is positioned and reeled in correctly.
Recommendations for children
Use a suitable child seat if the passenger is less than 12 years old or \
shorter than one and a half metres.
Never use the same seat belt to secure more than one person.
Never allow a child to travel on your lap.
For more information, refer to the "Child seats" section.
In the event of an impact
depending on the nature and seriousness of the impact , the
pretensioning device may be deployed before and independently
of the airbags. Deployment of the pretensioners is accompanied
by a slight discharge of harmless smoke and a noise, due to the
activation of the pyrotechnic cartridge incorporated in the system.
In all cases, the airbag warning lamp comes on.
Following an impact, have the seat belts system checked, and if
necessary
replaced, by a PEUGEOT

dealer or a qualified workshop.