2015 Peugeot 208 Owner's Manual

Ease of use and comfort71
208_en_Chap03_ergonomie-confort_ed01-2016
Interior fittings
Glove box
Placed in the lower dashboard, it has a lid with
a grip that is raised to open it.
It may house:
F
t
he handbook pack.
F

a
water bottle.
Below a front seat
Location for the warning triangle in its cover or
storage box.
Mats
When fitting the mat for the first time, on the
driver's side use only the fixings provided in the
wallet attached.
The other mats are simply placed on the
carpet.
Fitting
Removal
To remove the mat on the driver's side:
F m ove the seat as far back as possible,
F

un
clip the fixings,
F

r
emove the mat.
Refitting
To refit the mat on the driver's side:
F p osition the mat correctly,
F

r
efit the fixings by pressing,
F

c
heck that the mat is secured correctly.
To avoid any risk of jamming of the
pedals:
-

o
nly use mats which are suited to
the fixings already present in the
vehicle; these fixings must be used,
-

n
ever fit one mat on top of another.
The use of mats not approved by
PEUGEOT may inter fere with access to
the pedals and hinder the operation of
the cruise control / speed limiter.
The mats approved by PEUGEOT have
two fixings located below the seat.
Large open storage
It is in the location for an audio system
(depending on version).
Open storage
At the foot of the centre console:
- 2 l ocations for standard size cups or cans.
Door pockets.
3

Ease of use and comfort
72
208_en_Chap03_ergonomie-confort_ed01-2016
Ports and sockets - Connectivity
12 V socket
F To connect a 12 V accessory (maximum power: 120 Watts), lift the cover and
connect a suitable adaptor.
Do not exceed the maximum power
rating of the socket (otherwise there is a
risk of damaging your portable device).
USB port / Jack auxiliary socket
This connection box, consisting of an USB port
and a JACK auxiliary socket is located on the
centre console.
It allows the connection of portable device,
such as a digital audio player of the iPod
® type
or a USB memory stick.
It reads the audio files which are transmitted to
your audio system and played via the vehicle's
speakers.
You can manage these files using the steering
mounted controls or the audio system control
panel and display them in the instrument panel
screen. For more information on the use of this
system, refer to the "Audio equipment
and telematics" section.
When the USB port is used, the portable device
charges automatically.
While charging, a message is displayed if the
current drawn by the portable device exceeds
the power rating of the vehicle's port.
The connection of an electrical device
not approved by PEUGEOT, such as a
USB charger, may adversely affect the
operation of vehicle electrical systems,
causing faults such as poor telephone
reception or inter ference with displays
in the screens.

Ease of use and comfort73
208_en_Chap03_ergonomie-confort_ed01-2016
Boot fittings
1. Rear parcel shelf
2. Hooks
3.
B

oot lamp
4.
S

towing rings (depending on version)
3

Ease of use and comfort
74
208_en_Chap03_ergonomie-confort_ed01-2016
Rear parcel shelf
To remove the shelf:
F u nhook the two cords,
F

r
aise the shelf slightly, then remove it.
To refit the shelf:
F

e
ngage it in the supports on each side and
slide it up to the cut-outs,
F

r
aise it to refit the two cords.
To stow it:
-
v

ertically behind the rear seats,
-
v

ertically behind the front seats.

75
Mirrors
Door mirrors
ManualElectric
Adjustment
F
M ove control A to the right or to the left to
select the corresponding mirror.
F

M
ove control B in all four directions to
adjust.
F

R
eturn control A to the central position.
As a safety measure, the mirrors should
be adjusted to reduce the blind spot.
Folding
F Control A in the central position, pull it back
to fold the mirrors.
F

P
ull it again to unfold them.
Adjustment
F
O
perate the lever in the four directions to
adjust the angle of the mirror glass.
Folding
F

F

old the mirror manually to protect it when
the vehicle is parked.
F

U

nfold it before moving off again.
They do not have automatic heating.
4
Lighting and visibility

76
Using the remote control
Adjustment
F U nlock the vehicle with the remote control
to unfold the door mirrors.
F

W
hen locking the vehicle, the mirrors fold
automatically.
Automatic rear view mirror
A sensor measuring the light from the rear of
the vehicle, automatically and progressively
adjusts the brightness of the mirror.
Manual rear view mirror
If the mirrors are folded using control A ,
t hey will not unfold when the vehicle
is unlocked. It is necessary to press
control A again.
The automatic folding and unfolding
of the rear view mirrors when using
the remote control can be deactivated
by a PEUGEOT dealer or a qualified
workshop.
Fold the mirrors when using an
automatic car wash.
If necessary, it is possible to fold the
mirrors manually. The objects observed are, in reality,
closer than they appear.
Take this into account in order to
correctly judge the distance of vehicles
approaching from behind. The rear view mirror has two positions:
-

d
ay (normal),
-

n
ight (anti-dazzle).
To change from one to the other, push or pull
the lever on the lower edge of the mirror.
Lighting and visibility

77
Lighting
Main lighting
The vehicle has various exterior lamps:
- s idelamps, to be seen,
-

d
ipped beam headlamps to see without
dazzling other drivers,
-

m
ain beam headlamps to see clearly when
the road is clear.
Additional lighting
Other lamps are fitted to meet particular driving
conditions:
-

a r
ear foglamp to better signal the
presence of the vehicle in foggy conditions,
-
f

ront foglamps with cornering lighting,
-

d
aytime running lamps to be seen during
t h e d ay,
-

g
uide-me-home and welcome lighting for
leaving and entering the vehicle.
Automatic lighting
functions
Various automatic lighting functions are also
available depending on options:
-
gu

ide-me-home lighting,
-
c

ornering lighting,
-

w
elcome lighting,
-
d

aytime running lamps,
-

a
utomatic illumination of headlamps.
In some weather conditions (e.g. low
temperature or humidity), the presence
of misting on the internal sur face of the
glass of the headlamps and rear lamps
is normal; it disappears after the lamps
have been on for a few minutes.
4
Lighting and visibility

78
Manual mode
Lighting off (ignition off) / Daytime
running lamps (engine running).
Sidelamps only.
Dipped or main beam headlamps.
Dipping the headlamps
Pull the stalk to switch the lighting between
dipped / main beam headlamps.
In the lighting off and sidelamps modes, the
driver can switch on the main beam headlamps
temporarily ("headlamp flash") by maintaining a
pull on the stalk.
Display
Illumination of the corresponding indicator lamp
in the instrument panel confirms the lighting
switched on.
Place the desired symbol against the marking.
Lighting and visibility