2015 Peugeot 208 Owner's Manual

Access47
208_en_Chap02_ouvertures_ed01-2016
Reinitialisation
Always remove the key when leaving
the vehicle, even for a short time.
In the event of contact during operation
of the windows, you must reverse the
movement of the window. To do this,
press the switch concerned.
When operating the passenger electric
window controls, the driver must ensure
that no one prevents the correct closing
of the windows.
The driver must ensure that passengers
use the electric windows correctly.
Be aware of children when operating
the windows.Advice
Inhibition
For the safety of your children, press
the control to prevent operation
of the windows of the rear doors,
irrespective of their position.
With the warning lamp on, the rear switches
are deactivated. With the warning lamp off, the
switches are active. Following reconnection of the battery, the
safety anti-pinch function must be reinitialised.
The safety anti-pinch is not active during these
operations:
-
l

ower the window completely, then raise
it; it will rise in steps of a few centimetres
each time the switch is pressed. Repeat
the operation until the window closes
completely,
-

p
ress and hold the switch upwards for at
least 1 second after reaching this position,
window closed.
2

Ease of use and comfort
48
208_en_Chap03_ergonomie-confort_ed01-2016
F When stationary , pull the control lever
to release the steering wheel adjustment
mechanism.
F

A
djust the height and reach of the wheel to
suit your driving position.
F

P
ush the control lever to lock the steering
wheel adjustment mechanism.
As a safety measure, this operation
must only be carried out with the
vehicle stationary.
PEUGEOT i-Cockpit
To make the most of the special ergonomics of
the PE UGEOT i -Cockpit, adjust in the following
order:
-

t
he height of the head restraint,
-

t
he seat backrest angle,
-
t

he seat cushion height,
-

t
he longitudinal position of the seat,
-
t

he reach and then height of the steering
wheel,
-

t
he interior and door mirrors.
Once these adjustments have been made,
ensure that from your driving position you can
see the "head-up" instrument panel clearly,
over the reduced diameter steering wheel.
Adjusting the steering wheel

Ease of use and comfort49
208_en_Chap03_ergonomie-confort_ed01-2016
Front seats
F Raise the control and slide the seat forwards or backwards. F
P ull the control upwards to raise or push
it downwards to lower, as many times as
required, to obtain the position required. F
P ush the control rearwards.
Forwards-backwards
HeightBackrest
Standard
Adjustments
3

Ease of use and comfort
50
208_en_Chap03_ergonomie-confort_ed01-2016
The head restraint has a frame with
notches which prevent it from lowering;
this is a safety device in case of impact.
The adjustment is correct when the
upper edge of the head restraint is
level with the top of the head.
Never drive with the head restraints
removed; they must be in place and
adjusted correctly.
Head restraints
F To raise the head restraint, pull it upwards.
F T o remove the head restraint, press the
lug
A and pull the head restraint upwards.
F

T
o put the head restraint back in place,
engage the head restraint stems in the
openings, keeping them in line with the
seat back.
F

T
o lower the head restraint, press the lug A
and the head restraint at the same time. Before moving the seat backwards,
ensure that there is nothing that might
prevent the full travel of the seat, so as
to avoid the risk of jamming the seat
caused by the presence of objects
on the floor behind the seat or rear
passengers. If the seat jams, stop the
movement immediately.

Ease of use and comfort51
208_en_Chap03_ergonomie-confort_ed01-2016
Bucket seats
Height Backrest
Adjustments
F Lift the control and slide the seat for wards
or backwards. F
P ull the handle upwards to raise or push
it downwards to lower, as many times as
necessary to obtain the required position. F
P ush the handle towards the rear and
move the seat backrest for wards or
backwards.
Forwards-backwards
3

Ease of use and comfort
52
208_en_Chap03_ergonomie-confort_ed01-2016
Cover with opening lever
F L ift the lever to raise the lid. Storage space in the console
F
P ull the armrest fully up.
Additional adjustments
Heated seats
With the engine running, the front seats can be
heated separately.
F

U
se the adjustment wheel, select the level
of heating required:
0 : Of f.
1 : Low.
2 : Medium.
3 : High.
Armrest
Comfort and storage system for the driver and
front passenger.

Ease of use and comfort53
208_en_Chap03_ergonomie-confort_ed01-2016
Folding the backrest Raising the seat backrest
F Move the front seats for ward if necessary.
F
P osition the outer seat belts on the
backrest and buckle them.
F

L
ower the head restraints to the lowest
position. F
Ra ise the seat backrest 2
.
F L atch the backrest in place, the red
indicators on the controls 1 are no longer
visible.
F

U
nbuckle and return the outer seat belts to
their normal positions ready for use.
F
R elease the seat backrest 2 by press both
controls 1 simultaneously.
F

F
old the seat backrest 2 on to the fixed
cushion.
One-piece rear seats
Backrest
Bench seat with fixed one-piece cushion and folding one-piece backrest.
3

Ease of use and comfort
54
208_en_Chap03_ergonomie-confort_ed01-2016
Head restraints
These have one position for use (up) and a
stowed position (down).
They can be removed and are interchangeable
side to side.
To remove a head restraint:
F
p
ull the head restraint fully up,
F

t
hen, press the lug A .
2/3 - 1/3 split bench rear seat
Folding the backrest
F Release the backrest by pressing control 1 for
the seat backrest 2.
F Fold the seat backrest 2 on to the fixed cushion.
Bench seat with fixed one-piece cushion and split backrest (left hand 2/3, right hand 1/3) which can
be folded individually to adapt the load space in the boot.
F

M
ove the corresponding front seat for ward
if necessary.
F

P
osition the corresponding outer seat belt
against the backrest and buckle it.
F

F
ully lower or remove the head restraint. The rear cushion is not removable.
Seat backrest