2015 NISSAN JUKE wheel


> (GLW   0RGHO )'@
after ashort period oftime. Ifyou want to
return tothe D(Drive) position manually ,pull
and hold thepaddle shifterforabout 1.5
seconds.
M7 (7th) (except forNISMO RSmodels) :
GUID-F 83C168B-173D -4313-B631-F712588C04 63
M8 (8th) (NISMO RSmodels) :
GUID-F 83C168B-173D -4313-B631-F712588C04 63
Use thisposition forallnormal forward drivingat
highway speeds.
M6 (6th) andM5(5th) (except forNISMO
RS models) :
GUID-F 83C168B-173D -4313-B631-F712588C04 63
M7 (7th) andM6(6th) (NISMO RSmodels) :
GUID-F 83C168B-173D -4313-B631-F712588C04 63
Use these positions whendriving uplong
slopes, orfor engine braking whendriving down
long slopes.
M4 (4th) ,M3 (3rd) andM2(2nd) (except for
NISMO RSmodels) :
GUID-F 83C168B-173D -4313-B631-F712588C04 63
M5 (5th) ,M4 (4th) ,M3 (3rd) andM2(2nd)
(NISMO RSmodels) :
GUID-F 83C168B-173D -4313-B631-F712588C04 63
Use these positions forhill climbing orengine
braking ondownhill grades.
M1 (1st) :
GUID-F 83C168B-173D -4313-B631-F712588C04 63
Use thisposition whenclimbing steephills
slowly ordriving slowlythrough deepsnow,
sand ormud, orfor maximum enginebraking on
steep downhill grades. .
Remember nottodrive athigh speeds for
extended periodsoftime inlower thanM7
(except forNISMO RSmodels) orM8
(NISMO RSmodels) range.Thisreduces
fuel economy .
. Inthe manual shiftmode, thetransmis-
sion maynotshift tothe selected
range. Thishelps maintain drivingper-
formance andreduces thechance of
vehicle damage orloss ofcontrol.
When thissituation occurs,theCon-
tinuously Variable Transmission (CVT)
position indicator lightwillblink and
the chime willsound.
. Inthe manual shiftmode, thetransmis-
sion automatically shiftsdownto1st
gear before thevehicle comestoa
stop. When accelerating again,itis
necessary toshift uptothe desired
range.
. When theCVT fluidtemperature isextre-
mely low,the manual shiftmode maynot
work andautomatically shiftasadrive mode.
This isnot amalfunction. Inthis case, return
the shift lever tothe D(Drive) position and
drive forawhile andthen shifttothe manual
shift mode.
. When theCVT fluidtemperature ishigh, the
shift range mayupshift atalower engine
speed thanusual. Thisisnot amalfunction.
Accelerator downshiftÐInDposition Ð
GUID-BF3E0 6A6-2637-42C1-966D-5E 30031CA744
For passing orhill climbing, fullydepress the
accelerator pedaltothe floor. Thisshifts the
transmission downintoalower gear,depending
on the vehicle speed.
High fluidtemperature protectionmode
GUID-CE86 9FBC-89CE -4D62-AEC8 -660F5235AF 18
This transmission hasahigh fluidtemperature
protection mode.Ifthe fluid temperature be-
comes toohigh (forexample, whenclimbing
steep grades inhigh temperature withheavy
loads) ,engine powerand,under somecondi-
tions, vehicle speedwillbedecreased auto-
matically toreduce thechance oftransmission
damage. Vehicle speed canbecontrolled with
the accelerator pedal,buttheengine andvehicle
speed maybelimited.
Fail-safe
GUID-EA 910347-92 E1-44D4-92 56-120D487E42CA
If the vehicle isdriven underextreme
conditions, suchasexcessive wheelspin-
ning andsubsequent hardbraking, the
fail-safe systemmaybeactivated. TheMIL
may illuminate toindicate thefail-safe
mode isactivated. (SeeªMalfunction In-
dicator Light(MIL)º (P.2-18) .)This will
occur evenifall electrical circuitsare
functioning properly.Inthis case, place
the ignition switchinthe OFF position and
wait for10seconds. Thenturntheswitch
Starting anddriving
5-17
&RQGLWLRQ


> (GLW   0RGHO )'@
5-18
Starting anddriving
back tothe ONposition. Thevehicle
should returntoits normal operating
condition. Ifitdoes notreturn toits normal
operating condition, haveaNISSAN dealer
check thetransmission andrepair ifne-
cessary.
WARNING
When thehigh fluid temperature pro-
tection modeorfail-safe operation
occurs, vehiclespeedmaybegradually
reduced. Thereduced speedmaybe
lower thanother traffic,which could
increase thechance ofacollision. Be
especially carefulwhendriving. Ifne-
cessary, pulltothe side ofthe road ata
safe place andallow thetransmission
to return tonormal operation, orhave it
repaired if
necessary.
SSD1142
Shift lockrelease
GUID-39E4 740A-3513-44A0-A3 06-744DB1802606
If the battery charge islow ordischarged, the
shift lever maynotbemoved fromtheP(Park)
position evenwiththebrake pedal depressed
and theshift lever button pushed.
T o move theshift lever, perform thefollowing
procedure:
1. Place theignition switchinthe OFF or
L OCK position.
2. Apply theparking brake.
3. Remove theshift lockrelease cover
*
A
using asuitable tool. 4.
Push down theshift lockrelease usinga
suitable tool.
5. Push theshift lever button andmove the
shift lever tothe N(Neutral) positionwhile
holding downtheshift lockrelease.
Place theignition switchinthe ON position. The
vehicle maybemoved tothe desired location.
Replace theremoved shiftlockrelease cover
after theoperation.
If the battery isdischarged completely,the
steering wheelcannot beunlocked. Donot
move thevehicle withthesteering wheellocked.
If the shift lever cannot bemoved outofthe P
(Park) position, haveaNISSAN dealercheckthe
CVT system assoon aspossible.
WARNING
If the shift lever cannot bemoved from
the P(Park) position whiletheengine is
running andthebrake pedalisde-
pressed, thestop lights maynotwork.
Malfunctioning stoplights couldcause
an accident injuringyourself and
others.
&RQGLWLRQ


> (GLW   0RGHO )'@
GUID-A 7F7F37C-BB 96-45E4-9A88-BFC066 7354EF
. Keep your engine tunedup.
. Follow therecommended scheduledmain-
tenance.
. Keep thetires inflated tothe correct
pressure. Lowtirepressure increases tire
wear andlowers fueleconomy .
. Keep thewheels incorrect alignment.
Improper alignment increasestirewear and
lowers fueleconomy .
. Use therecommended viscosityengineoil.
(See ªEngine oiland oilfilter recommenda-
tionº (P.9-7) .)
GUID-63E 39624-CE54 -4BBF-8A6D-1FF62766 9DD9
WARNING
. For AWD equipped vehicles,donot
attempt toraise twowheels offthe
ground andshift thetransmission to
any drive orreverse position with
the engine running. Doingsomay
result indrivetrain damageorun-
expected vehiclemovement which
could result inserious vehicleda-
mage orpersonal injury.
. Do not attempt totest anAWD
equipped vehicleona2-wheel dy-
namometer (suchasthe dynam-
ometers usedbysome states for
emissions testing)orsimilar equip-
ment evenifthe other twowheels
are raised offthe ground. Makesure
that youinform thetest facility
personnel thatyour vehicle is
equipped withAWD before itis
placed onadynamometer. Using
the wrong testequipment mayre-
sult indrivetrain damageorunex -
pected vehicle movement which
could result inserious vehicleda-
mage orpersonal
injury.
SSD1129
AWD mode switch
ALL -WHEEL DRIVE(AWD) MODE
SWIT CHOPERA TIONS
GUID-D1E 25B84-9B31 -4A3A-B30F-1ACF488 15006
The All-Wheel Drive(AWD) system isused to
select the2WD (Two-Wheel Drive),A WD-V or
A WD mode depending onthe driving condi-
tions.
The AWD mode indicator lights(
(green) ,
) are located inthe instrument panel.
The AWD mode indicator lights
(green)
illuminate whentheignition switchisplaced in
the ON position. Theindicator lightsturnoff
within 1second.
The AWD mode indicator lightswilldisplay the
mode selected bythe AWD mode switch while
Starting anddriving
5-29
INCREASING FUELECONOMY ALL
-WHEEL DRIVE(AWD) (ifso
equipped)
&RQGLWLRQ


> (GLW   0RGHO )'@
5-30
Starting anddriving
engine isrunning.
If the AWD warning light
(yellow) illumi-
nates, theAWD mode indicator lightswillturn
off.
Push theAWD mode switch, located onthe
instrument panel,toselect 2WD,AWD-V or
A WD.
A WD-V :Push theAWD mode switch tothe
neutral (AWD-V) position. TheAll-Wheel Drive
(A WD) AWD-V indicator light
in the meter
illuminates.
2WD: PushtheAWD mode switch tothe 2WD
position.
A WD: Push theAWD mode switch tothe AWD
position. TheAWD indicator light
(green) in
the meter illuminates.
A WD mode Wheelsdriven A
WD mode indicator light
(
,
(green)) Use
conditions
2WD Front
wheels:
The wheel drivemode isin
T wo-Wheel Drive(2WD)
when driving onanormal road. T
urns off For
driving ondry,
paved roads
A WD-V Distribution
oftorque tothe
front andrear wheels changes
automatically [ratio;100:0
(2WD) ?50 :50 (AWD)] and
distribution oftorque between
left and right wheel ofrear
wheels changes automatically
depending onroad conditions
encountered [ratio;100:0
(2WD) ?50 :50 (AWD)]. Illuminates
For driving onpaved or
slippery roads
A WD Distribution
oftorque tothe
front andrear wheels changes
automatically [ratio;100:0
(2WD) ?50 :50 (AWD)] and
the distribution oftorque be-
tween theleftand right rear
wheels changes automatically
depending onthe slippery
road conditions encountered. Illuminates
(green)
For driving onslippery
roads
&RQGLWLRQ


> (GLW   0RGHO )'@
A WD shift tips
GUID-C35 72DD7-028 5-47BA-B5AE -F412F28BC6E1
. Ifthe AWD mode switch isoperated while
making aturn, accelerating ordecelerating,
or ifthe ignition switchisturned offwhile in
the AWD-V orAWD mode, youmay feela
jolt. This isnormal.
. The oiltemperature ofpower trainparts will
increase ifthe vehicle iscontinuously
operated underconditions wherethediffer-
ence inrotation between thefront andrear
wheels islarge (wheel slip),such aswhen
driving thevehicle onrough roadsthrough
sand ormud orwhen freeing astuck vehicle.
In these cases, theAWD warning lightblinks
rapidly andtheAWD mode changes tothe
2WD mode toprotect thepower trainparts.
If you stop driving withtheengine idlingand
wait until thewarning lightstops blinking,
the AWD returns tothe AWD-V orAWD
mode.
. Brake distance inthe AWD mode isthe
same as2WD.
CAUTION
. Do not start theengine withthe
AWD mode switch inany mode in
the following cases: Ð
when thevehicle isplaced ona
free-roller orjacking upthe
vehicle withthefront tires
raised andtherear tires onthe
ground.
Ð when towing thevehicle withthe
rear tires raised fromthe
ground.
. Operate theAWD mode switch only
when driving straight. Donot oper-
ate the AWD mode switch when
making aturn orbacking up.
. Do not operate theAWD mode
switch withthefront wheel spin-
ning.
. Engine idlingspeed ishigh while
warming upthe engine. Beespe-
cially careful whenstarting ordriv-
ing onslippery surfaces withthe
AWD mode switch setinthe AWD-V
or AWD mode.
SSD0336-D
A WD WARNING LIGHT
GUID-00 AD0D7B-4E5 0-437F-8A9D-C89C8757 711F
The AWD warning lightlocated inthe instrument
panel illuminates whentheignition switchis
placed inthe ON position. Itturns offsoon after
the engine isstarted.
If any malfunction occursinthe AWD system
while theengine isrunning, orwhile driving, the
Starting anddriving
5-31
&RQGLWLRQ


> (GLW   0RGHO )'@
5-32
Starting anddriving
warning lightwilleither remain illuminated or
blink.
High-temperature powertrainoildue tocon-
tinuous operation ofthe vehicle tofree astuck
vehicle makesthewarning lightblink rapidly
(about twicepersecond) .The driving modemay
change tothe 2WD mode. Ifthe warning light
blinks rapidly duringoperation, stopthevehicle
with theengine idlinginasafe place immedi-
ately .Then ifthe light goes offafter awhile, you
can continue driving.
A large difference betweenthediameters of
front andrear wheels willmake thewarning light
blink slowly (about onceper2seconds) .Pull off
the road inasafe area, andidletheengine.
Check thatalltire sizes arethesame, tire
pressure iscorrect andtires arenot worn.
Change theAWD mode switch tothe 2WD
mode anddonot drive fast.
CAUTION
. Ifthe warning lightilluminates while
driving, AWDmode willbechanged
to 2WD mode. Reduce thevehicle
speed andhave yourvehicle
checked byaNISSAN dealeras
soon aspossible. Beespecially
careful whendriving. .
The power trainmaybedamaged if
you continue drivingwiththeAWD
warning lightblinking rapidly.
&RQGLWLRQ


> (GLW   0RGHO )'@
GUID-E73 6AF38-DC1B -4F99-A928-0D36F3C B2A37
SSD0488
WARNING
. Donot stop orpark thevehicle over
flammable materialssuchasdry
grass, wastepaperorrags. They
may ignite andcause afire.
. Never leavetheengine running
while thevehicle isunattended.
. Do not leave children unattended
inside thevehicle. Theycould un-
knowingly activateswitches orcon-
trols. Unattended childrencould
become involved inserious acci- dents.
. Safe parking procedures require
that both theparking brakebe
applied andthetransmission placed
into P(Park) forContinuously Vari-
able Transmission (CVT)model orin
an appropriate gearforManual
T ransmission (MT)model. Failure
to do socould cause thevehicle to
move unexpectedly orroll away and
result inan accident.
. Make surethecontinuously variable
transmission shiftlever hasbeen
pushed asfar forward asitcan go and
cannot bemoved without de-
pressing thefoot brake pedal.
1. Firmly applytheparking brake.
2. Continuously Variable Transmission
(CVT) models:
Move theshift lever tothe P(Park) position.
Manual Transmission (MT)models:
Move theshift lever tothe R(Reverse) gear.
When parking onanuphill grade, placethe
shift lever inthe 1st gear.
3. To help prevent thevehicle fromrolling into
the street whenparked onasloping drive
way ,it is agood practice toturn thewheels
as illustrated.
.
HEADED DOWNHILL WITHCURB:
*
1
T urn thewheels intothecurb andmove
the vehicle forward untilthecurb side
wheel gently touches thecurb.
.
HEADED UPHILLWITHCURB:
*
2
T urn thewheels awayfromthecurb and
move thevehicle backuntilthecurb side
wheel gently touches thecurb.
.
HEADED UPHILLORDOWNHILL, NO
CURB:
*
3
T urn thewheels towardtheside ofthe
road sothe vehicle willmove awayfrom
the center ofthe road ifit moves.
Starting anddriving
5-33
P ARKING/PARKING ONHILLS
&RQGLWLRQ


> (GLW   0RGHO )'@
5-34
Starting anddriving
4. Place theignition switchinthe OFF position.
GUID-FCEF4 119-86A5-4E 02-81F1-220A1BD67BD0
WARNING
. Ifthe engine isnot running oris
turned offwhile driving, thepower
assist forthe steering willnotwork.
Steering willbeharder tooperate.
. When theelectric powersteering
warning lightilluminates withthe
engine running, thepower assistfor
the steering willcease operation.
Y ou will still have control ofthe
vehicle butthesteering willbe
harder tooperate.
The electric powersteering systemisdesigned
to provide powerassistwhiledriving tooperate
the steering wheelwithlight force.
When thesteering wheelisoperated repeatedly
or continuously whileparking ordriving atavery
low speed, thepower assistforthe steering
wheel willbereduced. Thisisto prevent
overheating ofthe electric powersteering
system andprotect itfrom getting damaged.
While thepower assistisreduced, steering
wheel operation willbecome heavy.When the
temperature ofthe electric powersteering
system goesdown, thepower assistlevelwill
return tonormal. Avoidrepeating suchsteering wheel
operations thatcould cause theelectric
power steering systemtooverheat.
Y ou may hear asound whenthesteering wheel
is operated quickly.However, thisisnot a
malfunction.
If the electric powersteering warninglight
illuminates whiletheengine isrunning, itmay
indicate theelectric powersteering systemis
not functioning properlyandmay need servicing.
Have theelectric powersteering system
checked byaNISSAN dealer.(SeeªElectric
power steering warninglightº(P.2-14) .)
When theelectric powersteering warninglight
illuminates withtheengine running, thepower
assist forthe steering willcease operation. You
will still have control ofthe vehicle. However,
greater steering effortisneeded, especially in
sharp turnsandatlow speeds.
ELECTRIC POWERSTEERING
S Y STEM
&RQGLWLRQ