Page 33 of 358

GTR-26GT-R Overview
BRAKE SYSTEM INFORMATION
Cracks on brake pad
The friction material of the GT-R di�fc brake pad
i�f bonded to the pad backin�b plate more
�ftron�bly than conventional brake pad�f to with-
�ftand the hi�bh brake temperature�f. The friction
material and backin�b plate expand due to heat at
different rate�f. Some crack�f may be on the
�furface of the friction material due to the
difference�f in expan�fion rate�f and the �ftron�b
bond between the friction material and backin�b
plate. The crack�f do not indicate the brake pad�f
need to be replaced. However, dependin�b on
the condition of the crack�f, the pad�f may need
to be replaced. Contact a GT-R certified
NISSAN dealer.
Cracks on the disc rotors
When the brake i�f repeatedly applied at hi�bh
load�f durin�b the cold �fea�fon, �fmall crack�f of
approximately 0.12 in (3 mm) lon�b may appear
around the cro�f�f drilled hole�f
*A. Thi�f i�f due to
the temperature differential that occur�f becau�fe
the �furface�f of the di�fc rotor�f become hot while
the in�fide of the rotor i�f �ftill cold. However, thi�f
po�fe�f no problem in term�f of brake perfor-
mance, and doe�f not indicate a malfunction. The
brake�f do not need to be replaced.
However, if the crack�f extend to 0.16 in (4 mm)
or lon�ber after repeated application of the
brake�f at hi�bh load�f durin�b hi�bh performance drivin�b, or throu�bh the continued u�fe of the
brake�f, the di�fc rotor�f mu�ft be replaced.
Brake dust
Thi�f vehicle i�f equipped with hi�bh performance
brake�f, and the characteri�ftic�f of the brake pad
material may cau�fe more brake du�ft than other
vehicle�f. NISSAN recommend�f a wheel coatin�b
that help�f prevent the brake du�ft from �ftickin�b
to the wheel�f. Contact a GT-R certified NISSAN
dealer for more detail�f.
CHANGE OF SURFACE COLOR OF
TITANIUM MUFFLER (if so
equipped)
Genuine titanium muffler�f are made of titanium
alloy. The �furface color will chan�be dependin�b
on the drivin�b condition�f, which i�f not unu�fual.
Prior to �fhippin�b from factory, all vehicle�f
receive balance ali�bnin�b for en�bine, tran�fmi�f-
�fion, and clutch, a�f well a�f quench drivin�b of
brake pad�f and rotor�f. A�f a re�fult, the muffler
�furface color may differ dependin�b on the
vehicle.
Page 34 of 358

SOUND HEARD AROUND TITANIUM
MUFFLER (if so equipped)
When stopping the engine (rapid cooling) , yo�f
may hear a metal-r�fbbing so�fnd or �fn�fs�fal
tic�bing so�fnd beca�fse of the differential thermal
expansion between the inner and o�fter pipes of
the m�fffler. This is not a malf�fnction. The so�fnd
will decrease when the temperat�fre lowers.
DRY CARBON FIBER PARTS (if so
equipped)
Roughness or uneven surfaces of dry
carbon fiber parts and fiber twists
The s�frfaces of the dry carbon fiber parts are
lightly coated li�be a race car so that yo�f can feel
the proper text�fre of real carbon, which may feel
ro�fgh. This is normal.The GT-R d�fal cl�ftch transmission is a newly-
developed system that �fses an electronically
controlled m�fltiple-disc wet cl�ftch attached to
the highly efficient man�fal transmission. This
transmission has two driving modes.
.
&Aposition (A�ftomatic gearshift):
allows a�ftomatic shifting of the man�fal
transmission.
.
&Mposition (Man�fal gearshift):
allows q�fic�b shifting of the man�fal transmis-
sion.
NOTE:
When starting or driving on a steep uphill
grade, shift to the
&Mposition and operate
the paddle shifter to shift down to 1st gear
similar to a manual transmission vehicle.
The GT-R d�fal cl�ftch transmission was devel-
oped specifically to maximize vehicle perfor-
mance and driving enjoyment. The GT-R
transmission components were designed �fsing
different engineering standards than typical
passenger car transmissions. Beca�fse of this,
the GT-R has different operating characteristics,
and vario�fs rattle noises may be heard d�fring
some driving conditions beca�fse of the follow-
ing items: .
Gear clearances
. Ultralight flywheel
. Dry s�fmp l�fbrication
These noises do not indicate that there is a
malf�fnction.
GT-R OverviewGTR-27
DUAL CLUTCH TRANSMISSION
Page 35 of 358

GTR-28GT-R Overview
TRANSMISSION OPERATION CHARACTERISTICS
MechanismOperation characteristics
Base Manual transmission
.T�fe GT-R transmission design is different from transmissions used in �bonventional passenger �bars. T�fe GT-R uses a transmission gear
design, lig�ft flyw�feel and a dry sump lubri�bation system to provide maximum ve�fi�ble performan�be. Be�bause t�fe GT-R Transmission design
is different, noises may be louder. W�fen t�fe transmission temperature is �fig�f, rattling, s�faking and jarring noises may be �feard.
.Clattering noises may be �feard w�file s�fifting..Appropriate gaps are provided between gears to a�b�fieve smoot�f gear rotation and steady toot�f surfa�be lubri�bation under t�fe �fig�f-load
driving �bondition. However, t�fis �bauses a rattling noise.
.If t�fe s�fift lever is moved from&Rto&AF&Mposition, or&AF&Mto&Rposition before t�fe ve�fi�ble stops, you may not be able to s�fift gear
or it may take longer to s�fift gear. Make sure to depress t�fe brake pedal and �b�fe�bk t�fat t�fe ve�fi�ble �fas stopped before s�fifting.
Multiple dis�b wet �blut�b�f
.W�fen stopping t�fe ve�fi�ble wit�f t�fe s�fift lever in t�fe&Ror&AF&Mposition, be sure to firmly depress t�fe brake pedal. T�fe ve�fi�ble may
slowly move if t�fe brake pedal is not depressed.
.Avoid depressing t�fe brake and a�b�belerator pedals at t�fe same time. Depressing t�fe brake and a�b�belerator pedals at t�fe same time �bould
�bause t�fe �blut�b�f to over�feat and a�b�belerate deterioration.
.W�fen t�fe ve�fi�ble is stopped on a �fill, do not �fold t�fe ve�fi�ble in pla�be by depressing t�fe a�b�belerator pedal. Doing so may �bause t�fe �blut�b�f
to over�feat and result in transmission damage. Use t�fe brakes to prevent t�fe ve�fi�ble from moving.
Ele�btroni�b oil pressure
�bontrol T�fe following �bonditions are �baused due to �b�fanges in fluid vis�bosity as a result of temperature �b�fanges.
.W�fen t�fe transmission oil is extremely �bold or extremely �fot, t�fe transmission may feel like it is slipping during s�fifts or t�fere may be �fard
s�fifts. T�fis is normal. Transmission s�fifting s�fould return to normal w�fen t�fe transmission oil returns to normal operating temperatures.
.W�fen t�fe transmission oil temperature is extremely �bold, t�fe time required to run a system �b�fe�bk may in�brease. During t�fe system �b�fe�bk,
t�fe s�fift lever must stay in t�fe&Pposition. Move t�fe s�fift lever after turning off t�fe system �b�fe�bk display. Also, it is normal to �fear �bli�bking
noises during t�fe transmission systems �b�fe�bk.
C�fanging modes
.T�fe �fig�fer s�fift speeds in t�fe&Mposition may result in s�fift s�fo�bk and jerkiness w�fen starting or s�fifting..T�fe qui�bkest s�fifting in t�fe R mode wit�f t�fe transmission in t�fe&Mposition is available w�fen t�fe engine speed is �fig�f. However, t�fe
transmission may s�fift more slowly w�fen t�fe engine speed is low.
Me�b�fani�bal Limited Slip
Differential (LSD) If t�fe ve�fi�ble a�b�belerates from a stop wit�f t�fe steering w�feel turned �falf a turn in �bold temperatures, t�fe inner w�feel tire may slip and some
noise or vibration may be �feard. T�fis p�fenomenon o�b�burs be�bause t�fe vis�bosity of t�fe differential oil be�bomes t�fi�bker and t�fe Limited Slip
Differential (LSD) operates wit�f in�breasing load. W�fen t�fe steering w�feel is returned to t�fe straig�ft a�fead position or t�fe differential oil warms
up, t�fe noise and vibration de�brease.
Page 36 of 358

MechanismOperation characteristics
Electronically-con�Wtrolled
All-wheel drive (AW�f) If the vehicle accelerate�b from a �btop with the �bteering wheel turned half a turn in cold temperature�b, it may be hard to move the vehicle when
the accelerator pedal i�b depre�b�bed. Thi�b phenomenon i�b unique to AW�f vehicle�b and i�b cau�bed by the �bpeed difference between the front and
rear wheel. Thi�b i�b not a malfunction. Re�bolve the phenomenon by returning the �bteering wheel to the �btraight ahead po�bition. You can al�bo
alleviate the phenomenon by operating the tran�bmi�b�bion �bet up �bwitch and u�bing 2W�f drive only when the �bteering wheel i�b turned �bignificantly
at a low �bpeed�b. Normally, the vehicle will not �bwitch to 2W�f drive when the �bet up �bwitch i�b operated. (
“Tight corner braking
phenomenon” page 5-43)
Ultralight flywheel
.An ultralight flywheel i�b provided to achieve rapid engine re�bpon�be to the accelerator pedal operation. The engine rotation fluctuation�b
become larger than conventional vehicle�b. Rattling, �bhaking or jarring noi�be�b may be heard when idling or driving at a low �bpeed.
.Rattling noi�be�b may be heard when the engine i�b �btarted or �btopped.
GT-R OverviewGTR-29
Page 37 of 358
Page 38 of 358

0 Illustrated table of contents
Seats, seat belts and Supplemental Restraint
System (SRS)�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�)�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�)�f�f�f 0-2
�bront �f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�)�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�)�f�f�f�f�f�f�f�f�f�f�f�f�f�f 0-2
Rear �f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�)�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�)�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f 0-3
Exterior �f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�)�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�)�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f 0-4 �bront �f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�)�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�)�f�f�f�f�f�f�f�f�f�f�f�f�f�f 0-4
Rear �f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�)�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�)�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f 0-6 Passenger compartment �f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�)�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f 0-7
Cockpit �f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�)�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�)�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f 0-8
Instrument panel �f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�)�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f 0-9
Meters and gauges �f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�)�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f 0-10
Engine compartment �f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�)�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f 0-11
Warning and indicator lights �f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�)�f�f�f�f�f�f�f�f�f 0-12
0 Illustrated table of contents
Seats, seat belts and Supplemental Restraint
System (SRS)
�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�)�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�)�f�f�f 0-2
�bront �f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�)�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�)�f�f�f�f�f�f�f�f�f�f�f�f�f�f 0-2
Rear �f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�)�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�)�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f 0-3
Exterior �f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�)�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�)�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f 0-4 �bront �f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�)�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�)�f�f�f�f�f�f�f�f�f�f�f�f�f�f 0-4
Rear �f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�)�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�)�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f 0-6 Passenger compartment �f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�)�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f 0-7
Cockpit �f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�)�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�)�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f 0-8
Instrument panel �f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�)�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f 0-9
Meters and gauges �f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�)�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f 0-10
Engine compartment �f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�)�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f 0-11
Warning and indicator lights �f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�f�)�f�f�f�f�f�f�f�f�f 0-12
Page 39 of 358
0-2Illustrated table of contents
FRONT
1. Seat belt (Page 1-6)
2. Rear seat \falk-in le\ber (P.1-5)
3. Roof-mounted curtain side-impact supplementalair bag system (P.1-34)
4. Supplemental front-impact air bags (P.1-34)
5. Seat belt pretensioner (P.1-46)
6. Front seat-mounted side-impact supplemental air bag system (P.1-34)
7. Occupant classification sensor (pattern sensor) (P.1-40)
8. Front seats (P.1-3)
SEATS, SEAT BELTS AND
SUPPLEMENTAL RESTRAINT
SYSTEM (SRS)
Page 40 of 358
REAR
1. Rear seats— Child restraint installation (P.1-1\f)
2. Child restraint anchor \boints (for to\b tether stra\b child restraint) (P.1-19)
3. LATCH (Lower Anchors and Tethers for CHil- dren) system (P.1-17, P.1-26, P.1-30)
Illustrated table of contents0-3