2015 MERCEDES-BENZ SPRINTER display

Adjusting treble and bass
X Call up the sound settings. X
Select Treble
Treble orBass
Bass.
The display shows the sound setting with
current sound level 0043and previous sound
level 0044.
X Select the desired sound level ( -10 -10to+10
+10 ). Setting the sound distribution
You can adjust the balance and fader depend-
ing on the vehicle's equipment.
R Balance: right/left distribution
R Fader: front/rear distribution
X Call up the sound settings. X
Select Bal/Fad Bal/Fad.
You see a schematic diagram of the
passenger compartment and the current
sound distribution.
X Set the sound distribution with the
0059, 0065,0064and0063 buttons.
X Press the control knob. Exiting sound settings
X Press the 0038button.
or
X Press the 0064button.
X Select Back Back.
Audio 15 stores the new sound settings. Switching audio fadeout on/off
This function can only be switched on if the
optional navigation module is installed. Audio
fadeout reduces the volume of other audio
sources, such as the radio, when you receive a navigation message.
X Press the 003Bbutton.
X Select Settings Settings. X
Select Audio Fadeout for Nav
Audio Fadeout for Nav
Instructions
Instructions .
X Switch the function on 0073or off 0053using
the control knob.
X Press the 0038button.
X To exit system settings: press the 002A
or 00FD button. Bluetooth
®
settings Requirements for a Bluetooth
®
con-
nection
With Audio 15, you can use the following
functions via Bluetooth ®
: 20
Bluetooth ®
settingsSystem settings

R
make a phone call using a mobile phone
R play an audio file via an audio device
To do so, the following conditions must be
met:
R you require a mobile phone with Blue-
tooth ®
or an audio device with Bluetooth ®
(Bluetooth ®
device).
R the Bluetooth ®
device must be located
inside the vehicle in the vicinity of Audio 15.
R the Bluetooth ®
function of Audio 15 is acti-
vated (Y page 21).
R the Bluetooth ®
function of the Bluetooth ®
device is activated.
R the device must support the A2DP and
AVRCP audio profiles.
i Information on the Bluetooth ®
mobile
phones and audio devices recommended
by Mercedes-Benz is available from quali-
fied specialist workshops. Activating/deactivating the Blue-
tooth
®
function
X Press the 003Bbutton.
X Press the 0064button repeatedly until the
menu bar is selected.
X Select Settings
Settings . X
To activate : selectActivate Activate Bluetooth
Bluetooth.
The display shows the 0073symbol. The Blue-
tooth ®
function is activated. X
To deactivate : press the control knob
again.
The display shows the 0053symbol. The Blue-
tooth ®
function is deactivated.
X To exit the menu : press the0038button.
i The Bluetooth ®
function will remain
active until you deactivate it again. If you
switch Audio 15 off, the existing Blue-
tooth ®
connection is disconnected. The
call can be continued on the mobile phone.
When switching on, Audio 15 automatically establishes the connection. Pairing/unpairing a Bluetooth
®
device
What does pairing mean? When pairing, an authorized connection is
established between Audio 15 and the Blue-
tooth
®
device.
Your mobile Bluetooth ®
device must be visi-
ble. Information on how to make your Blue-
tooth ®
device visible can be found in the
operating instructions of your Bluetooth ®
device.
If Audio 15 and your Bluetooth ®
device are
paired, they will connect automatically as
soon as there is a Bluetooth ®
connection.
i Audio 15 saves the pairing data of up to
10 Bluetooth ®
devices. If an additional
Bluetooth ®
device is coupled, Audio 15
overwrites the pairing data for the Blue-
tooth ®
device that has not been connected
to it for the longest period of time.
There are two ways of pairing:
R Bluetooth ®
pairing: Audio 15 searches for
the Bluetooth ®
device and starts the pair-
ing process
R Bluetooth ®
external : the Bluetooth ®
device searches for Audio 15 and starts the pairing process Bluetooth
®
settings 21System settings

i
If you pair a mobile phone as an audio
device, it is automatically paired as a
mobile phone as well, as long as your
mobile phone supports this.
Pairing a Bluetooth ®
device (mobile
phone/audio device) using Bluetooth ®
pairing X
Press the 002Bbutton.
or X Select the Bluetooth ®
audio function.
X Press the 0064button repeatedly until the
menu bar is selected.
X Select Telephone Telephone/BT Audio BT Audio.
X Connect Phones
Connect Phones/Bluetooth Device Bluetooth Device
List
List.
X Select Update
Update.
Audio 15 searches for Bluetooth ®
devices
within range for a certain period of time.
If at least one Bluetooth ®
device is found,
the display shows the Bluetooth ®
name of
the device.
If Audio 15 does not find a Bluetooth ®
device, the Search for Bluetooth
Search for Bluetooth
devices failed devices failed message is shown in the
display.
X To search again: select Update
Update.X
Select the desired Bluetooth ®
device using
the control knob.
The display shows the input menu for the
passkey. X
To enter the passkey: enter an easy to
remember, four-digit number using the
004A to0089 number keys.
X To confirm the entry: select OK OK.
or
X Select four digits in the number bar using
the control knob.
X Select OK
OK.
The Bluetooth ®
device is authorized.
X Select Bluetooth ®
device name MB Blue-
tooth on the device.
X Enter the four-digit number selected previ-
ously on the Bluetooth ®
device, and con-
firm.
X Confirm possible prompts using the Blue-
tooth ®
device.
The Authorization successful Authorization successful mes-
sage is shown in the display. You will see
the Bluetooth ®
name of the Bluetooth ®
device in the display/selection window.
i When the
Authorization failed Authorization failed mes-
sage is displayed, you may have exceeded
the prescribed time period. Repeat the pro-
cedure.
Alternatively, the pairing was only deleted
on the Bluetooth ®
device. In this case, the
Bluetooth ®
device must be unpaired and
then paired again. 22
Bluetooth ®
settingsSystem settings

Pairing a Bluetooth
®
device externally
(mobile phone/audio device) using
Bluetooth ® X
Press the 002Bbutton.
or
X Select the Bluetooth ®
audio function.
X Press the 0064button repeatedly until the
menu bar is selected.
X Select Telephone
Telephone/BT Audio BT Audio.
X Connect Phones
Connect Phones/Bluetooth Device Bluetooth Device
List
List.
The Update Update message is shown in the dis-
play.
X Select the list symbol next to the entry
using the 0065button.
X Press the control knob. X
Select External Authorization External Authorization.
X Start the Bluetooth ®
scan process on the
Bluetooth ®
device.
X Select Bluetooth ®
device name MB Blue-
tooth on the device.
A prompt appears in the display asking
whether the Bluetooth ®
device should be
authorized.
X To authorize: select Yes
Yes.
The Bluetooth ®
device is authorized. X
To enter the passkey: using the number
keys 004A to0089, enter an easy to
remember, four-digit number.
X Select OK OK.
or
X Select four digits in the number bar using
the control knob.
X Select OK OK.
X Enter the number selected previously on
the Bluetooth ®
device, and confirm.
X Confirm possible prompts using the Blue-
tooth ®
device.
The Authorization successful Authorization successful mes-
sage is shown in the display. You will see
the Bluetooth ®
name of the Bluetooth ®
device in the display/selection window.
i When the
Authorization failed Authorization failed mes-
sage is displayed, you may have exceeded
the prescribed time period. Repeat the pro-
cedure.
Reconnecting a Bluetooth ®
device Reconnecting a mobile phone
Audio 15 always searches for the last con-
nected Bluetooth
®
device. If the last connec-
ted Bluetooth ®
device cannot be connected,
Audio 15 searches for the Bluetooth ®
device
that was connected prior to that. Bluetooth
®
settings 23System settings

Reconnecting an audio device
Audio 15 connects automatically to a Blue-
tooth ®
audio device in the following cases:
R both previously connected mobile phones
were used as audio devices
R the mobile phones establishes the connec-
tion automatically
i Audio 15 does not connect automatically
to an audio device that does not have a
telephone function, even if this was the last
Bluetooth ®
device connected.
X To reconnect an audio device without a
telephone function : select the Bluetooth ®
audio function.
If no audio device is connected, the No
No
Bluetooth Audio Device Connected Bluetooth Audio Device Connected
message appears in the display. X
Use the 0064or0063 button to select
Connect Last Device
Connect Last Device.
X Press the control knob.
Audio 15 searches for the audio device. If it
finds an audio device, it is connected.
Connecting another Bluetooth ®
device
(mobile phone/audio device) If you have authorized more than one Blue-
tooth ®
device, you can switch between the
devices.
i You can only switch to another authorized
phone if you are not currently making a call. X
Press the 002Bbutton.
or
X Select the Bluetooth ®
audio function.
X Press the 0064button repeatedly until the
menu bar is selected.
X Select Telephone
Telephone/BT Audio BT Audio.
X Connect Phones Connect Phones/Bluetooth Device Bluetooth Device
List
List .
The display shows all paired Bluetooth ®
devices. The current Bluetooth ®
device is
identified by the 0036dot. X
Select the Bluetooth ®
device that you wish
to connect.
Audio 15 searches for the Bluetooth ®
device. If it finds a Bluetooth ®
device, it is
connected.
i Audio 15 can only be connected to one
Bluetooth ®
device at any one time.
Displaying Bluetooth ®
details X
Press the 002Bbutton.
or
X Select the Bluetooth ®
audio function.
X Press the 0064button repeatedly until the
menu bar is selected.
X Select Telephone Telephone/BT Audio BT Audio.
X Connect Phones Connect Phones/Bluetooth Device Bluetooth Device
List List .
The display shows all paired Bluetooth ®
devices. The current Bluetooth ®
device is
identified by the 0036dot. 24
Bluetooth ®
settingsSystem settings

X
Select the Bluetooth ®
device whose details
you wish to see.
X Use the 0065button to select the icon next
to the entry. X
Select Details
Details.
The display shows the following informa-
tion on the selected Bluetooth ®
device:
R Bluetooth ®
name
R Bluetooth ®
address
R availability
R authorization status
X To exit the detailed view : press the0038
button.
Unpairing a Bluetooth ®
device (mobile
phone/audio device) X
Press the 002Bbutton.
or X Select the Bluetooth ®
audio function.
X Press the 0064button repeatedly until the
menu bar is selected.
X Select Telephone Telephone /BT AudioBT Audio.
X Connect Phones
Connect Phones /Bluetooth DeviceBluetooth Device
List
List.
The display shows all paired Bluetooth ®
devices. The current Bluetooth ®
device is
identified by the 0036dot. X
Select the Bluetooth ®
device that you wish
to unpair.
X Select the list symbol next to the entry
using the 0065button.
X Select Delete Delete .
A prompt appears in the display asking
whether the Bluetooth ®
device should be
de-authorized. X
To unpair: select Yes Yes.
The Bluetooth ®
device is de-authorized and
deleted from the device list.
X To cancel the unpairing process: select
No No.
The Bluetooth ®
device is not unpaired from
Audio 15. You have canceled the process. System language
As standard, Audio 15 accepts the language
set in the on-board computer. You can also
set the language independently of the on-
board computer. System language
25System settings

i
You must set the language of the naviga-
tion system separately.
X Press the 003Bbutton.
X Select Settings
Settings .
X Select Language
Language .
The display shows a list of available lan-
guages. The 0036dot indicates the currently
set language. X
Select the desired language.
The Audio 15 display texts are shown in the
selected language.
Or X Select Synchronize languages Synchronize languages.
The Audio 15 display texts are shown in the display language selected for the on-board
computer.
X To exit system settings: press the002A
or 00FD button. Resetting to factory settings
You can reset the settings of Audio 15 to the
factory settings. This will delete all personal
data (station memory, phone book etc.).
i Resetting to factory settings is useful
when you sell the vehicle, for example.
X Press the 003Bbutton.
X Select Settings
Settings . X
Select Reset
Reset.
A prompt appears in the display asking
whether the data should be deleted. X
To delete: select Yes Yes.
The display shows a further prompt.
X Confirm the second prompt with Yes
Yesas
well.
Audio 15 is reset and restarted.
or
X To cancel the deleting process : select
No No.
Audio 15 is not reset.
Resetting without deleting your personal
data:
X Press and hold the 0043on/off button for
approximately 10 seconds.
Audio 15 is reset. 26
Resetting to factory settingsSystem settings

Important safety notes
G
WARNING
If you operate information systems and com-
munication equipment integrated in the vehi- cle while driving, you will be distracted from
traffic conditions. You could also lose control of the vehicle. There is a risk of an accident.
Only operate the equipment when the traffic
situation permits. If you are not sure that this
is possible, park the vehicle paying attention
to traffic conditions and operate the equip-
ment when the vehicle is stationary.
Observe the legal requirements of the coun-
try in which you are currently driving.
The navigation system calculates the route to
the destination without taking account of the following, for example:
R traffic lights
R stop and give way signs
R parking or stopping restrictions
R road narrowing
R other road and traffic rules and regulations
The navigation system may provide incorrect
navigation announcements if the surround-
ings do not correspond to the data on the
digital map. For example, a route may have
been diverted or the direction of a one-way
street may have changed.
For this reason, you must always observe
road and traffic rules and regulations during
your journey. Road and traffic rules and reg-
ulations always have priority over the sys-
tem's driving recommendations. Becker
®
MAP PILOT navigation mod-
ule
With the Becker ®
MAP PILOT navigation mod-
ule, you can upgrade Audio 15 to a fully-
fledged navigation system.
Further information can be found under
http://www.beckermappilot.com. GPS (Global Positioning System)
Position finding and route guidance take
place using GPS ( GlobalPositioning System).
For this purpose, the navigation module has
an integrated GPS receiver that receives the
satellite signals and determines your geo-
graphical location.
i Without GPS reception, route guidance is
not possible. Preparing navigation
Inserting the navigation module
i Switch off the ignition before removing or
inserting the navigation module.
X Open the glove box.
X Insert the navigation module into the
device holder.
The battery built into the navigation module
starts charging when the vehicle ignition is
switched on.
X Remove the catch on the front side of the
device holder.
This way, the navigation module is secured,
as well as protected against theft.
X Close the glove box. Switching on the navigation system
X Press the 00CBbutton.
or
X Press the 0063button repeatedly until the
main menu bar is selected.
X Select Navi Navi.
The display shows the main menu of the
navigation system.
i If the battery was completely discharged,
it takes up to 1 minute before the naviga-
tion system is ready. 28
Preparing navigationNavigation system