2015 MAZDA MODEL 3 HATCHBACK Navigation Manual (in English)

43
3.1.6 Selecting a recent destination from the History
1. Select after selecting on the MAP screen.
2. In the Navigation menu, select
.
3. The list of recent destinations appears. Smart History promotes three de\
stinations to the fi rst page based on your previous routes (most likely destinations). The rest of the
destinations are ordered by time they were last selected. If necessary, scroll the list to
see earlier destinations.

4. Select a destination from the list.
5. The selected location is shown on the map.
The system transitions to the next screen by selecting
, or it returns to the
previous screen by selecting the button. By touching the location displayed on the
screen, you can change the destination to anywhere on the map.
Note! •
: You can search for POI (point of interest) around the
selected location.
•
: The selected location can be registered to
Favorites.
/"7"76#&JOEC







44
6. Navigation starts if
is selected, or after 10 seconds of no user interaction.
By touching the location displayed on the screen, you can verify the rou\
te. Additionally,
the route can be revised by selecting other options.
3.1.7 Entering the coordinate of the destination
You can also select a destination by entering its coordinate as follows:
1. Select
after selecting on the MAP screen.
2. In the Navigation menu, select
.
3. Input map coordinate value of and .
4. When fi nished, select .

5. Select .
/"7"76#&JOEC







45
6. The selected location is shown on the map.
The system transitions to the next screen by selecting
, or it returns to the
previous screen by selecting the button. By touching the location displayed on the
screen, you can change the destination to anywhere on the map.
Note! •
: You can search for POI (point of interest) around the
selected location.
•
: The selected location can be registered to
Favorites.
7. Navigation starts if
is selected, or after 10 seconds of no user interaction.
By touching the location displayed on the screen, you can verify the rou\
te. Additionally,
the route can be revised by selecting other options.
/"7"76#&JOEC







46
3.2 Checking route parameters and accessing route related functions
You can check different parameters of the route recommended by the navigation system.1. Select
after selecting on the MAP screen.
2. The following pieces of information are displayed:
• The name and/or address of the destination.
• The total time of the route.
• The total length of the route.
• The route planning method (e.g. Fast).

3. You have the following options on this screen (for detailed instructions\
on how to use them, see the next chapter):
• Select
to edit the route.
• Select
to display the entire route on the map.
• Select
to bypass a part of the route.
• Select
to delete the active route.
Note! There are other convenient functions.
/"7"76#&JOEC







47
3.3 Modifying the route
When navigation is already started, there are several ways to modify the\
active route. The
following sections show some of those options.
3.3.1 Selecting a new destination when already having a route: New Route, Waypoint or Final Destination
If you already have a recommended route and you select a new destination\
as described in the
above sections, the application will ask you whether to start a new rout\
e, add a new waypoint
(intermediate destination) to the route or append the newly selected d\
estination at the end of
the current route.
• Select to plan a new route to the newly selected location. The previous
destination and waypoint(s) are deleted.
• Select
to add the newly selected location as an intermediate destination to yo\
ur
route. The other destinations of the route remain intact. Note: the new waypoin\
t is placed
among destinations to keep the route optimal. To decide where a waypoint to appear, use
the Edit Route feature.
• Select
to append the newly selected destination at the end of the route.
The other destinations of the route remain intact. The previous fi nal destination is now the
last waypoint.
/"7"76#&JOEC







48
3.3.2 Editing the list of destinations (Edit Route)
You can edit the route by modifying the list of destinations.1. Select
after selecting on the MAP screen.
2. Select
.
3. Edit the destination or waypoint.
: Add the new destination or waypoint.
: Start the route plan in consideration of the selected destination or w\
aypoint.
4. Select the destination or waypoint to display the menu.
: Close the menu.
: Delete the selected destination or waypoint from the list.
: Move the selected destination or waypoint forward one by one.
: Move the selected destination or waypoint rearward one by one.
/"7"76#&JOEC







49
3.3.3 Checking route alternatives when planning the route
You can select from different route alternatives or change the route planning method after you \
have selected a new destination.1. Select
after selecting on the MAP screen.
2. Select .
3. The four route alternatives are displayed next to the selected route pla\
nning method. Select one to view it on the map.
4. Details of a route can be checked by selecting .
5. Select one of the route alternatives or select to return to the previous screen.
The navigation system recalculates the route. The orange line now shows the new
recommended route.
/"7"76#&JOEC







50
3.3.4 Changing the road types used in route planning
To recalculate the active route with different road type preferences, do as follows. These
changes can also be made in Settings (page 59). 1. Select
after selecting on the MAP screen.
2. Select
.
3. Select any of the listed road types to modify the route. If needed, scro\
ll the list for all road types. You have the following options (their order depends on the selected vehi\
cle
type):
•
- You might need to avoid highways/freeways if you are towing
another vehicle.
•
- Charge roads are pay roads where you can purchase a pass
or vignette to use the road for a longer period of time. They can be enabled or
disabled separately from toll roads.
•
- The navigation system includes toll roads (pay roads where
there is a per-use charge) in the routes by default. If you disable tol\
l roads, the
navigation system plans the best toll-free route.
•
- The navigation system includes ferries in a planned route by
default. However, a map does not necessarily contain information about the
accessibility of temporary ferries. You might also need to pay a fare on ferries.
•
- Setting in which routes with carpool lanes can be created or not
created.
•
- The navigation system excludes unpaved roads by default:
unpaved roads can be in a bad condition and usually you cannot reach the\

speed limit on them.
•
- A border crossing may be a shorter route depending on the
route. For this function, you can select whether or not to cross a borde\
r when
planning the route.
4. The route has already been recalculated. Select
to return to the Map screen.
/"7"76#&JOEC