2015 MAZDA MODEL 3 4-DOOR Owners Manual

9–11
Specifi cations
Specifi cations
(Mexico)
Tire size Infl
ation pressure
Front Rear
P205/60R16 91H 250 kPa (2.5 bar, 36 psi) 250 kPa (2.5 bar, 36 psi)
Tire size Infl
ation pressure
Up to 3 persons —Full load
215/45R18 89W Front 240 kPa (2.4 bar, 35 psi) 280 kPa (2.8 bar, 41 psi)
Rear 230 kPa (2.3 bar, 33 psi) 300 kPa (3.0 bar, 44 psi)
1 person's weight: About 75 kg
Temporary spare tire
Tire size
Infl ation pressure
T125/70D16 96M 420 kPa (60 psi)
Lug nut tightening torque
When installing a tire, tighten the lug nut to the following torque.
108—147 N•m (12—14 kgf•m, 80—108 ft•lbf)
Fuses
Refer to Fuses on page 6-59 .
.B[EB@%9&"'@&EJUJPOJOEC


.B[EB@%9&"'@&EJUJPOJOEC










9–12
Specifi cations
Personalization Features
Personalization Features
The following personalization features can be set or changed by an Authorized Mazda
Dealer. Consult an Authorized Mazda Dealer for details.
Additionally, some of the personalization features can be changed by the customer
depending on the feature.
Personalization features which can be changed differ depending on the market and
specifi cation.
Settings can be changed by operating the center display screen.
Settings can be changed by operating the vehicle switches.
Settings can be changed by an Authorized Mazda Dealer.
Item Feature Factory
Setting Available
Settings Settings change method
Safety Forward
Obstruction
Warning
(FOW)
Refer to
Forward
Obstruction
Warning
(FOW) on
page 4-115 . The system can be
changed so that
Forward Obstruction
Warning (FOW)
does not operate.
*1
On On/Off Refer to
Settings on page 5-55 . — —
The distance at
which the collision
warning activates
can be changed. Near Near/Far
Refer to
Settings on page 5-55 . — —
The volume of the
collision warning
can be changed. High
High/Low/
Off
Refer to Settings on page 5-55 . — —
Smart
City Brake
Support
(SCBS)
Refer to
Smart
City Brake
Support
(SCBS) on
page 4-71 . The system can be
changed so that
Smart City Brake
Support (SCBS)
does not operate.
*1
On On/Off Refer to
Settings on page 5-55 . — —
.B[EB@%9&"'@&EJUJPOJOEC


.B[EB@%9&"'@&EJUJPOJOEC










9–13
Specifi cations
Personalization Features
Item Feature Factory
Setting Available
Settings Settings change method
Safety Lane
Departure
Warning
System
(LDWS)
Refer
to Lane
Departure
Warning
System
(LDWS) on
page 4-118 . The warning
sound for the Lane
Departure Warning
System (LDWS) can
be changed.
*2
Beep Beep/Rumbl. Refer to
Settings on page 5-55 . —
The
volume
of the
warning
sound for
the Lane
Departure
Warning
System
(LDWS)
can be
changed. Rumbl. High
High/Mid/
Low
Refer to Settings on page 5-55 . —
Beep High High/Low Refer to
Settings on page 5-55 . —
The sensitivity of
the warning for the
Lane Departure
Warning System
(LDWS) can be
changed. Low High/Low
Refer to
Settings on page 5-55 . —
The warning timing
in which the Lane
Departure Warning
System (LDWS)
determines that
the vehicle may be
deviating from its
lane can be changed. Before At/Before
Refer to
Settings on page 5-55 . —
Blind Spot
Monitoring
(BSM)
system
Refer to
Blind Spot
Monitoring
(BSM)
System on
page 4-107 . The volume of the
BSM warning beep
can be changed.
*3 High
High/
Low/ Off Refer to Settings on page 5-55 . —
.B[EB@%9&"'@&EJUJPOJOEC


.B[EB@%9&"'@&EJUJPOJOEC










9–14
Specifi cations
Personalization Features
Item Feature Factory
Setting Available
Settings Settings change method
Vehicle Power door
lock
Refer to
Auto Lock/
Unlock
Function on
page 3-16 .
Changes the auto
lock/unlock function
setting for all the
doors according to
the vehicle speed,
the vehicle power
supply condition,
and the selector
lever position.
Lock: When
Driving
Unlock: IGN Off Lock: Out of
Park Unlock: In Park/ Lock:
Shifting Out of Park/
Lock: When Driving
Unlock: IGN Off/
Lock: When Driving/ Off
Refer to Settings on page 5-55 . Refer to
Auto Lock/ Unlock
Function on page 3-16 .
Keyless
entry system
Refer to
Keyless
Entry
System on
page 3-3 . The method for
unlocking the doors
using the transmitter
can be changed.
Driver's: Once,
All Doors: Twice All Doors:
Once/
Driver's:
Once, All
Doors: Twice Refer to Settings on page 5-55 . Refer to
Transmitter
on page 3-4 .
The time required
for the doors to
relock automatically
after unlocking with
the transmitter can
be changed. 60 seconds
90 seconds/
60 seconds/
30 seconds
Refer to Settings on page 5-55 . —
.B[EB@%9&"'@&EJUJPOJOEC


.B[EB@%9&"'@&EJUJPOJOEC










9–15
Specifi cations
Personalization Features
Item Feature Factory
Setting Available
Settings Settings change method
Vehicle Advanced
keyless
entry system
Refer to
Advanced
Keyless
Entry
System on
page 3-9 . The volume of the
answer-back beep
during advanced
keyless entry system
operation can be
changed.
Medium
High/
Medium/ Low/ Off
Refer to Settings on page 5-55 .
Refer to
Locking,
Unlocking
with Request
Switch (With the advanced keyless
function) on page 3-13 .
The function to
automatically lock
the doors when
leaving the vehicle
while carrying the
key can be changed. Off On/Off
Refer to
Settings on page 5-55 . —
The method for
unlocking the doors
using the request
switch/transmitter
can be changed. Driver's: Once,
All Doors: Twice All Doors:
Once/
Driver's:
Once, All
Doors: Twice Refer to Settings on page 5-55 .
Refer to
Locking,
Unlocking
with Request
Switch (With the advanced keyless
function) on page 3-13 . Refer to
Transmitter
on page 3-4 .
The time required
for the doors to
relock automatically
after unlocking with
the request switch/
transmitter can be
changed. 60 seconds
90 seconds/
60 seconds/
30 seconds
Refer to Settings on page 5-55 . —
Illumination
entry
Refer to
Illuminated
Entry
System on
page 5-136 . The time required
for the interior
lamp to turn off
automatically can be
changed (prevents
battery depletion
when a door is open/
ajar).
30 minutes
60 minutes/
30 minutes/
10 minutes Refer to Settings on page 5-55 . —
The time required
for the interior
lamp to turn off
automatically after
all doors are closed
can be changed. 15 seconds
60 seconds/
30 seconds/
15 seconds/
7.5 seconds
Refer to Settings on page 5-55 . —
.B[EB@%9&"'@&EJUJPOJOEC


.B[EB@%9&"'@&EJUJPOJOEC










9–16
Specifi cations
Personalization Features
Item Feature Factory
Setting Available
Settings Settings change method
Vehicle Auto-wiper
control
Refer to
Windshield
Wipers and
Washer on
page 4-51 .
The auto-wiper
control function can
be changed.
On On/Off
*4 Refer to
Settings on page 5-55 . —
Daytime
running
lights
Refer to
Daytime
Running
Lights on
page 4-46 . The function of the
daytime running
lights can be
changed.
On
On/
Off — —
Auto
headlight
off
*5
Refer to
Headlights
on page
4-40 . The time required
for headlights
to turn off after
ignition is switched
off can be changed.
30 seconds 120 seconds/
90 seconds/
60 seconds/
30 seconds/ Off
*6
Refer to Settings on page 5-55 . —
Auto-light
control
Refer to
Headlights
on page
4-40 . The headlight
illumination on/
off timing based
on surrounding
lightness/darkness
can be changed.
Medium
High/
Med. High/ Medium/
Med. Low/ Low
Refer to Settings on page 5-55 . —
High Beam
Control
System
(HBC)
Refer to
High Beam
Control
System
(HBC) on
page 4-47 . The High Beam
Control System
(HBC) function can
be changed.
*1
On On/Off Refer to
Settings on page 5-55 . —
Lights-on
reminder*7
Refer to
Lights-On
Reminder
on page
7-35 . The volume of the
lights-on reminder
warning alarm can
be changed.
Off
High/Low/
Off Refer to Settings on page 5-55 . —
.B[EB@%9&"'@&EJUJPOJOEC


.B[EB@%9&"'@&EJUJPOJOEC










9–17
Specifi cations
Personalization Features
Item Feature Factory
Setting Available
Settings Settings change method
Vehicle Turn
indicator
Refer to
Turn and
Lane-
Change
Signals on
page 4-50 .
The turn indicator
beep volume level
can be changed.
High High/Low
Refer to
Settings on page 5-55 . —
Three-fl
ash
turn signal
Refer to
Three-Flash
Turn Signal
on page
4-51 . The three-time fl
ash
function can be
changed. On On/Off
Refer to
Settings on page 5-55 . —
System Distance
unit
The distance unit
can be changed.
mi or km mi/km
Refer to
Settings on page 5-55 . —
Language
The display
language can be
changed.*8 English English/
French/
Spanish Refer to Settings on page 5-55 . —
Temperature
unit
The temperature unit
can be changed.
°F or °C °F/°C Refer to
Settings on page 5-55 . —
Fuel
Economy
Monitor
Refer
to Fuel
Economy
Monitor
on page
4-85 . Ending
display
Setting can be
changed so that the
ending display of
the Fuel Economy
Monitor is
displayed.
Off On/Off
Refer
to Fuel
Economy Monitoron page 4-85 . —
Fuel
economy
resetting
procedure Setting can be
changed so that the
fuel economy reset
is linked with the
trip meter reset.
Off On/Off Refer
to Fuel
Economy Monitoron page 4-85 . —
.B[EB@%9&"'@&EJUJPOJOEC


.B[EB@%9&"'@&EJUJPOJOEC










9–18
Specifi cations
Personalization Features
Item Feature Factory
Setting Available
Settings Settings change method
Active
driving
display
Refer to
Active
Driving
Display
on page
4-18 . Turn-by-
Turn (TBT)
Setting can be
changed so that
the Turn-by-Turn
(TBT) of the Active
driving display is
not displayed.
On On/Off
Refer to
Active
driving
display
on page 4-18 . —
*1 Though these systems can be turned Off, doing so will defeat the purpose of the system and Mazda recommends
that these systems remain On.
*2 For vehicles with an audio system other than the on-screen function type\
, the warning sound cannot be changed. The warning sound is only a beep.
*3 Only the volume of the warning beep during Blind Spot Monitoring (BSM)\
operation can be changed. The volume of the warning beep during Rear Cross Traffi c Alert (RCTA) operation cannot be changed.
*4 If the auto-wiper control is set to Off, the wiper lever
position is set to intermittent operation.
*5 If the setting is changed to Off, the following operation is performed according to the headlight switc\
h position:
y At position: Headlights turn off immediately after the ignition is switched off.y At any position other than : Headlights do not turn off after the ignition is switched off.
*6 When set to Off, the lights-on reminder is operable.
*7 The setting of the lights-on reminder can be changed with the time setti\
ng of auto headlight off function set to Off. Refer to Lights-On Reminder on page 7-35 .
*8 Available only in display from the center display.
.B[EB@%9&"'@&EJUJPOJOEC


.B[EB@%9&"'@&EJUJPOJOEC