Page 543 of 886
5433-4. Using the audio system
3
Interior features Switching the display
Press . Each time the button is pressed, the display changes in the following order:
Elapsed time Album title Tr a c k t i t l e Artist name■
Bluetooth ®
audio system functions
Depending on the portable player that is connected to the system, certain functions
may not be available.■
Display
P. 4 9 7■
Error messages
“Memory Error”: This indicates a problem in the system.
Page 557 of 886
5573-4. Using the audio system
3
Interior features Changing the audio source
Press when the audio system is turned on. The audio source
changes as follows each time the button is pressed. If no discs are
inserted in the player, that mode will be skipped.
Type A:
FM1 FM2 SAT1 SAT2 SAT3 CD player
Bluetooth ®
audio AUX iPod or USB memory
AM FM1
Type B:
FM1 FM2 CD player Bluetooth ®
audio AUX
iPod or USB memory AM FM1
Adjusting the volume
Press “+” on to increase the vo lume and “-” to decrease the vol-
ume. Hold down the button to continue increasing or decreasing the volume.
Selecting a radio station
Press to select radio mode.
Press “ ” or “ ” on to select a radio station.
To scan for receivable stations, press and hold “ ” or “ ” on the button
until you hear a beep.STEP 1
STEP 2
Page 597 of 886
5973-5. Using the interior lights
3
Interior features ■
Illuminated entry system
The lights automatically turn on/off according to “ENGINE START STOP” switch
mode, the presence of the electronic key, whether the doors are locked/unlocked,
and whether the doors are open/closed.■
To prevent battery discharge
When the “ENGINE START STOP” switch is turned off, the lights will go off auto-
matically after 20 minutes. ●
Personal lights●
Interior lights●
Door courtesy lights●
Scuff lights (if equipped)●
Footwell lights■
Customization
Settings (e.g. the time elapsed before the lights turn off) can be changed.
(Customizable features P. 8 3 4 ) Interior lights and personal lights
Page 795 of 886
5
When trouble arises
7955-2. Steps to take in an emergency
■
Stopping the engine
Shift the shift lever to P and press the “ENGINE START STOP” switch as you nor-
mally do when stopping the engine.■
Replacing the key battery
As the above procedure is a temporary measure, it is recommended that the elec-
tronic key battery be replaced immediately when the battery is depleted.
( P. 7 0 1 )■
Changing “ENGINE START STOP” switch modes
Within 10 seconds of the buzzer sounding, release the brake pedal and press the
“ENGINE START STOP” switch.
The engine does not start and modes will be changed each time the switch is
pressed. ( P. 166)
Page 847 of 886
8456-2. Customization
6
Vehicle specifications Turn signal lever (
P. 187)
Intuitive parking assist (
P. 245)Function Default
setting Custom-
ized
setting
Times of flashing of
the lane change sig-
nal flashers 3 5 — —
O — —
O7
9
11
Off
Function Default
setting Custom-
ized
setting
Buzzer volume 3 1 to 5 O —
O — —
O
Detection distance
of the front center
sensors Far Near O —
O — —
O
Detection distance
of the rear center
sensors Far Near O —
O — —
O
Display setting
(when intuitive park-
ing assist is operat-
ing) All sensors
displayed No sensors
displayed O —
O — —
O