2015 KIA CADENZA Navigation System Quick Reference Guide

6
Advanced
Press the Sound button ▶
Press
Advanced ▶ Set and press
Done
.
This is used to set the Surround and
Speed Dependent Volume Control
features.
Surround
Speed Dependent Volume Control
allows you to automatically control
the volume according to the speed of
the vehicle. This feature will gradually
increase the volume as vehicle speed
increases, to offset outside noise.
Speed Dependent Volume Control
Press the Sound button ▶
Press
Advanced ▶ Turn the
feature
On ▶ Set and press
Done
.
The volume level is controlled auto -
matically according
to the vehicle
speed.
Setting Beep
Press the Sound button ▶
Press
Beep ▶ Set and press
Done
.
Each press of this button turns the
BEEP tone on/off.
Sound Settings

Display Settings
7
Display Settings
Press the
key ▶ Press
Setup ▶ Press Display
.
i Information
• UVO eServices is an optional feature
available in select vehicles on select
trims.
Adjusting Brightness
Press the Display button ▶
Press
Brightness ▶ Set and press
Done
.
Use the ◀ or ▶ buttons to adjust the
display brightness.
Setting Display \bode
Press the Display button ▶
Press
Display Mode ▶ Set and
press
Done .
Press the button for the desired dis-
play mode from
Automatic ,
Daylight , and Light modes.

8
Starting Mode
Press the FM/AM key to change
the mode in order of FM1 → FM2
→ AM.
When the power is OFF, pressing the
FM/AM key will turn the power on and
play a radio broadcast
Using Seek
Press the , key to
automatically search for frequencies.
• Shortly press the key (under 0.8 seconds) :
Plays previous/next frequency
• Press and hold the key (over 0.8 seconds) :
Changes the frequency while pressed
and
receives the next frequency upon
release.
Using TUNE
Turn the TUNE knob left/right to
select the frequency.
• FM1/FM2 : Increases/decreases by
200kHz
• AM : Increases/decreases by 10kHz
Selecting Presets
From the 6 presets, select the fre -
quency you want to listen to.
FM/AM Mode

9
Saving Radio Frequency
Saving \banually
After selecting frequency ▶ Press
and hold (over 0.8 seconds) the
preset button.
• A 'beep' will sound and the fre -
quency will
be saved to the selected
preset button.
Saving Automatically
Press the Auto Store to automatically
save receivable frequencies to Preset
buttons.
A total of 18 frequencies with six pre -
set frequencies each for FM1/FM2/
AM modes can be saved.
Scanning Radio
Frequency
Press the Scan button to scan
all radio frequencies.
Starting from the current frequency,
frequencies with superior reception
are scanned for 5 seconds and the
previous frequency is restored.
FM/AM Mode

10
Using the Menu Buttons
Press the Menu
button to use the
Preset Scan menu.
Preset Scan
Press the Menu button ▶ Press
Preset Scan.
• Frequencies saved to the 6 preset
buttons are each played for 5 sec
-
onds and the previous frequency is
restored.
Text On\fText Off
Press the Menu
button ▶ Press
ON Text On
.
The Text feature is turned on/off.
• If the ON Text On
button is displayed
(Text off state), information will not
be displayed even if there is infor -
mation being transmitted from the
broadcast station.
• If the Off Text Off
button is dis -
played (Text on state), then broad -
cast information will be displayed.
Information may not be displayed if
th

ere is no information being trans -
mitted from the broadcast station.
FM/AM Mode

11
Starting Mode
Press the FM/AM key to turn on
Radio mode.
If an HD RadioTM broadcast is received,
the radio mode will switch from analog
broadcast to HD Radio
TM broadcast.
Operating HD RadioTM
Mode
Selecting a Frequen\ccy
As HD RadioTM reception is included
within FM/AM mode, the methods of
moving between channels, saving pre -
sets, searching, or methods of search -
ing frequencies are identical. However,
while the HD Radio
TM related icon
display will become active when within
regions where an HD Radio
TM signal
can be received.
Using TUNE
Turn the TUNE knob left/right to
select the frequency.
Selecting through Preset
From the 6 presets, select the HD RadioTM
broadcast you want to listen to.
HD RadioTM Mode

12
Song-Tagging
The song tagging feature provides
a way to capture broadcasted song
information from the radio for future
purchase in iTunes
®.
Upon connection of an Apple audio
playback device , the "tagged songs"
will be transferred to your iTunes
®
account in your Tagged songs folder.
HD RadioTM Digital
Broadcast On/Off
Press the
key ▶ Press
Setup ▶ Press the HD Radio
▶ Press On / Off
.
HD RadioTM Broadcasts can be turned
On and Off for HD Radio
TM FM and
AM mode.
HD Radio Mode

13
Starting Mode
Press the S AT key to change
the mode in order of SIRIUS1 →
SIRIUS2 → SIRIUS3.
When the power is OFF, pressing the
S AT key will turn the power on
and play an SIRIUS Radio broadcast.
Using SEEK
Press the , key
on the control panel for under 0.8
seconds.
The previous or next channel will be
selected.
Using TUNE
Turn the TUNE knob to display
the previous or next channel
information.
After a brief moment, the selected
channel will be played.
Selecting Presets
From the 6 presets, select the chan -
nel you want to listen to.
SIRIUS Mode