2015 DODGE CHARGER SRT Owners Manual

Page 217 of 595

DODGE CHARGER SRT 2015 7.G Owners Manual ParkSense® System Usage Precautions
NOTE:
•Ensure that the rear bumper is free of snow, ice, mud,
dirt and debris to keep the ParkSense® system oper-
ating properly.
•Jackhammers, large trucks,

Page 218 of 595

DODGE CHARGER SRT 2015 7.G Owners Manual CAUTION!
•ParkSense® is only a parking aid and it is unable to
recognize every obstacle, including small obstacles.
Parking curbs might be temporarily detected or not
detected at all. Obstacles loc

Page 219 of 595

DODGE CHARGER SRT 2015 7.G Owners Manual NOTE:The ParkView® Rear Back Up Camera has pro-
grammable modes of operation that may be selected
through the Uconnect® System. Refer to “Uconnect®
Settings” in “Understanding Your Instrument

Page 220 of 595

DODGE CHARGER SRT 2015 7.G Owners Manual WARNING!
Drivers must be careful when backing up even when
using the ParkView® Rear Back Up Camera. Always
check carefully behind your vehicle, and be sure to
check for pedestrians, animals, other ve

Page 221 of 595

DODGE CHARGER SRT 2015 7.G Owners Manual OVERHEAD CONSOLE
The overhead console contains courtesy/reading lights
and storage for sunglasses. Universal Garage Door
Opener (HomeLink®) and power sunroof switches may
also be included, if equippe

Page 222 of 595

DODGE CHARGER SRT 2015 7.G Owners Manual To turn the lights off, push the switch a second time. The
lights also turn on when a door is opened. The lights will
also turn on when the UNLOCK button on the RKE is
pushed.
Courtesy Lights
The cour

Page 223 of 595

DODGE CHARGER SRT 2015 7.G Owners Manual Sunglasses Bin Door
At the front of the console a compartment is provided for
the storage of a pair of sunglasses. The storage compart-
ment access is a “push/push” design. Push the chrome
pad on

Page 224 of 595

DODGE CHARGER SRT 2015 7.G Owners Manual NOTE:HomeLink® is disabled when the Vehicle Secu-
rity Alarm is active.
Before You Begin Programming HomeLink®
Be sure that your vehicle is parked outside of the garage
before you begin programming.