2015 Citroen C4 display

08
347
C4-2_en_Chap13b_SMEGplus_ed01-2015
C4-2_en_Chap13b_SMEGplus_ed01-2015
Depending on your telephone, you may be asked to accept automatic  connection   every   time   the   ignition   is   switched   on.
Depending
  on   the   type   of   telephone,   the   system  
will

  ask   you   to   accept   or   not   the   transfer   of   your  
contacts. The
  services   available   depend   on   the   network,   the   SIM   card   and   the  
compatibility

  of   the   Bluetooth   telephone   used.   Check   the   telephone  
manual

  and   with   your   network   provider   for   details   of   the   services  
available

  to   you.
On   return   to   the   vehicle,   the   last   telephone   connected   automatically  
reconnects,

  within   around   30   seconds   after   switching   on   the   ignition  
(Bluetooth

  activated).
To
  modify   the   automatic   connection   mode,   select   the   telephone   in  
the

  list   then   select   the   desired   profile.
The
  telephone   is   added   to   the   list.
BLUETOOTH
If not, select "
Update".
The   ability   of   the   system   to   connect   with   only   one   profile   depends   on  
the

  telephone.  
The
  two   profiles   may   both   connect   by   default.
Visit   www.citroen.co.uk   for   more   information   (compatibility,   additional  
help,

  ...).
Automatic reconnection
Connecting a Bluetooth peripheral
On switching on the ignition, the telephone connected when the ignition
  was   last   switched   off   is   automatically   reconnected,   if   this  
connection

  mode   had   been   activated   during   the   pairing   procedure.
The
  connection   is   confirmed   by   the   display   of   a  
message

  and   the   name   of   the   telephone.
Press on Telephone
  to   display   the   primary  
page

  then   go   to   the   secondary   page.
Manual connection
Select "Bluetooth" to display the list of paired
peripherals.
Select
  the   peripheral   to   connect.
Press on "Search".
The
  connection   is   confirmed   by   the   display   of   a  
message

  and   the   name   of   the   telephone.

08
C4-2_en_Chap13b_SMEGplus_ed01-2015
C4-2_en_Chap13b_SMEGplus_ed01-2015
Receiving a call
An incoming call is announced by a ring and a superimposed display in  the   screen.
Make
  a   short   press   on   the   steering   mounted  
TEL

  button   to   accept   an   incoming   call.
Make
  a   long   press   on   the   steering   mounted  
TEL

  button   to   reject   the   call.
or
Select "End call".
Managing paired telephones
Press on Telephone to display the primary page   then   go   to   the   secondary   page.
Select "Bluetooth" to display the list of paired
peripheral
  devices.
Select
  the   peripheral   in   the   list.
Select:
-
"Search" or "Disconnect" to connect or
disconnect the
b luetooth connection with
the
  peripheral   selected.
-
"Delete"   to   remove   the   pairing.
BLUETOOTH
348This function allows the connection or disconnection of a peripheral
device
  as   well   as   the   deletion   of   a   pairing.

08
349
C4-2_en_Chap13b_SMEGplus_ed01-2015
C4-2_en_Chap13b_SMEGplus_ed01-2015
Press on Telephone to display the primary page.
Calling a new number
Calling a contact
Making a callUse of the telephone is not recommended while driving. W
e   recommended   that   you   park   safely   or   make   use   of   the  
steering

  mounted   controls.
Enter
 
the
 
phone
 
number
 
using
 
the
 
keypad
 
then
 
"

Call"
 
to
 
start
 
the
 
call.
Press on Telephone
 
to
 
display
 
the
 
primary
 
page.
Select "

Contacts".
Select
  the   desired   contact   from   the   list   offered.
Select "Call".
CONTACTS
Or make a long press on the steering mounted TEL   button.

08
350
C4-2_en_Chap13b_SMEGplus_ed01-2015
C4-2_en_Chap13b_SMEGplus_ed01-2015
Calling a recently used number
Ending a call
It is always possible to make a call directly from the telephone; park the  vehicle   first   as   a   safety   measure.
Select "Call log
".
Press on Telephone   to   display   the   primary  
page.
Select

  the   desired   contact   from   the   list   offered. Select "End call".
CALL
LOG
or
Make
 
a
 
long
 
press
 
on
 
the
 
steering   mounted  
TEL

 
button.

08
351
C4-2_en_Chap13b_SMEGplus_ed01-2015
C4-2_en_Chap13b_SMEGplus_ed01-2015
Ringtones
Select "Telephone Options".
Press on Telephone   to   display   the   primary  
page

  then   go   to   the   secondary   page.
Select "Ringtones".
You
  can   select   the   ringtone   used   and   adjust   its   volume.Select "Contacts". Press on Telephone
  to   display   the   primary  
page.
Select "

Add contact".
Select:
-
"New"   to   add   a   new   contact.
-
"Modify"   to   edit   the   selected   contact.
-
"Delete"   to   delete   the   selected   contact.
-
"Delete all"   to   delete   all   of   the   information  
for

  the   selected   contact.
Select "Confirm". Select "Directory information"
  for   the   number  
of

  entries   used,   available,   ...
Managing contacts / Entries
SETTINGS

C4-2_en_Chap13b_SMEGplus_ed01-2015
C4-2_en_Chap13b_SMEGplus_ed01-2015
FREqUENTLY ASKED q UESTIONS
353
q

UESTION
ANSWER SOLUTION
Certain
 
traffic
 
jams
 
along

 
the
 
route
 
are
 
not
 
indicated

 
in
 
real
 
time.
On
 
starting,
 
it
 
is
 
several
 
minutes
 
before
 
the
 
system
 
begins
 
to
 
receive
 
the
 
traffic

 
information.
Wait
 
until
 
the
 
traffic
 
information
 
is
 
being
 
received  
correctly

 
(display
 
of
 
the
 
traffic
 
information
 
icons
 
on  
the

 
map).
The
 
filters
 
are
 
too
 
restrictive.
Modify
 
the
 
"Geographic
 
filter"
 
settings.
In
 
certain
 
countries,
 
only
 
major
 
routes
 
(motorways...)
 
are
 
listed
 
for
 
the
 
traffic

 
information.
This
 
phenomenon
 
is
 
normal.
 
The

 
system
 
is
 
dependent

 
on
 
the
 
traffic
 
information
 
available.
The altitude is not
displayed. On
 
starting,
 
the
 
initialisation
 
of
 
the
 
GPS
 
may
 
take
 
up
 
to
 
3
 
minutes
 
to
 
receive

 
more
 
than
 
4
 
satellites
 
correctly.
Wait
 
until
 
the
 
system
 
has
 
started
 
up
 
completely.
 
Check

 
that
 
there
 
is
 
a
 
GPS
 
coverage
 
of
 
at
 
least
 
4 satellites

 
(long
 
press
 
on
 
the
 
SETUP
 

button,
 
then  
select

 
"GPS
 
coverage").
Depending
 
on
 
the
 
geographical
 
environment
 
(tunnel...)
 
or
 
the
 
weather,
 
the

 
conditions
 
of
 
reception
 
of
 
the
 
GPS
 
signal
 
may
 
vary.
This
 
phenomenon
 
is
 
normal.
 
The

 
system
 
is

 
dependent
 
on
 
the
 
GPS
 
signal
 
reception
 
conditions.
T

elephone, Bluetooth
I
 
cannot
 
connect
 
my
 
Bluetooth

 
telephone.
The
 
telephone's
 
Bluetooth
 
function
 
may
 
be
 
switched
 
off
 
or
 
the
 
telephone
 
may

 
not
 
be
 
visible.
-
 
Check

 
that
 
your
 
telephone's
 
Bluetooth
 
function

 
is
 
switched
 
on.
-
 
Check

 
in
 
the
 
telephone
 
settings
 
that
 
it
 
is
 
"visible

 
to
 
all".
The
 
Bluetooth
 
telephone
 
is
 
not
 
compatible
 
with
 
the
 
system.
You
 
can
 
check
 
the
 
compatibility
 
of
 
your
 
telephone  
at

 
www.citroen.co.uk
 
(services).
The
 
volume
 
of
 
the
 
telephone connected
in

 
Bluetooth
 
mode
 
is
 
inaudible.
The

 
volume
 
depends
 
both
 
on
 
the
 
system
 
and
 
on
 
the
 
telephone.
Increase
 
the
 
volume
 
of
 
the
 
audio
 
system,
 
to
 
maximum

 
if
 
required,
 
and
 
increase
 
the
 
volume
 
of  
the

 
telephone
 
if
 
necessary.
The
 
ambient
 
noise
 
level
 
has
 
an
 
influence
 
on
 
the
 
quality
 
of
 
telephone
 
communication.
Reduce

 
the
 
ambient
 
noise
 
level
 
(close
 
the
 
windows,
 reduce

 
the
 
booster
 
fan
 
speed,
 
slow
 
down, ...).

C4-2_en_Chap13b_SMEGplus_ed01-2015
C4-2_en_Chap13b_SMEGplus_ed01-2015
FREqUENTLY ASKED q UESTIONS
354
q
UESTION
ANSWER SOLUTION
Some   contacts   are  
duplicated

  in   the   list.
The   options   for   synchronizing   contacts   are   synchronizing   the   contacts  
on

  the   SIM   card,   the   contacts   on   the   telephone,   or   both.   When   both  
synchronizations

  are   selected,   some   contacts   may   be   duplicated.
Select " d isplay SIM card contacts" or " d isplay
telephone   contacts".
Contacts are not shown
in   alphabetical   order.
Some   telephones   offer   display   options.   Depending   on   the   settings  
chosen,

  contacts   can   be   transferred   in   a   specific   order.
Modify   the   display   setting   in   the   telephone  
directory

.
The system does not receive
 SMS  text  messages.The Bluetooth mode does not permit sending SMS text messages to the system.
CD, MP3
The
 
CD
 
is
 
ejected
 
automatically

 
or
 
is
 
not
 
played

 
by
 
the
 
player. The C
d is inserted upside down, is unplayable, does not contain any
audio
  data   or   contains   an   audio   format   which   the   player   cannot   play.-
 
Check
  that   the   CD   is   inserted   in   the   player   the  
right

  way   up.
-
 
Check
  the   condition   of   the   CD:   the   CD   cannot  
be

  played   if   it   is   too   damaged.
-
 Check

  the   content   in   the   case   of   a   recorded
 CD:

  refer   to   the   advice   in   the   "AUDIO"   section.
-

The audio system's CD player does not play DVDs.
- Some recorded CDs will not be played by the audio system  because   they   are   not   of   the   correct   quality.
The CD has been recorded in a format that is not compatible with the player  (udf,...).
The
  CD   is   protected   by   an   anti-pirating   protection   system   which   is   not  
recognised

  by   the   audio   system.
There is a long waiting period  following   the   insertion of a C

d or connection of a
USB
  memory   stick.When a new medium is inserted, the system reads a certain amount of data  (directory,   title,   artist,   etc.).  This   may   take   from   a   few   seconds   to   a  
few

  minutes. This
  phenomenon   is   normal.
The C
d
player sound is
poor. The
  CD   used   is   scratched   or   of   poor   quality. Insert
  good   quality   CDs   and   store   them   in   suitable  
conditions.
The

  audio   equipment   settings   (bass,   treble,   ambiences)   are   unsuitable. Set   the   treble   or   bass   level   to   0,   without   selecting  
an

  ambience.

C4-2_en_Chap13b_SMEGplus_ed01-2015
C4-2_en_Chap13b_SMEGplus_ed01-2015
FREqUENTLY ASKED q UESTIONS
355
q

UESTION
ANSWER SOLUTION
Some
 
characters
 
in
 
the
 
media

 
information
 
are
 
not
 
displayed correctly while
playing.
The

 
audio
 
system
 
does
 
not
 
display
 
some
 
types
 
of
 
characters.
Use
 
standard
 
characters
 
to
 
name
 
tracks
 
and
 
folders.
Playing

 
of
 
streaming
 
files
 
does

 
not
 
start.
The
 
peripheral
 
device
 
connected
 
does
 
not
 
support
 
automatic
 
play. Start
 
the
 
playback
 
from
 
the
 
device.
The
 
names
 
of
 
tracks
 
and
 
the

 
track
 
length
 
are
 
not
 
displayed on the screen
when

 
streaming
 
audio.
The
 
Bluetooth
 
profile
 
does
 
not
 
allow
 
the
 
transfer
 
of
 
this
 
information.
Radio
The
 
quality
 
of
 
reception
 
of the radio station
listened

 
to
 
gradually
 
deteriorates or the stored
stations do not function
(no

 
sound,
 
87.5 Mhz
 
is
 
displayed...).
The

 
vehicle
 
is
 
too
 
far
 
from
 
the
 
transmitter
 
used
 
by
 
the
 
station
 
listened
 
to

 
or
 
there
 
is
 
no
 
transmitter
 
in
 
the
 
geographical
 
area
 
through
 
which
 
the
 
vehicle

 
is
 
travelling.
Activate
 
the
 
"RDS"
 
function
 
by
 
means
 
of
 
the
 
short-cut

 
menu
 
to
 
enable
 
the
 
system
 
to
 
check
 
whether

 
there
 
is
 
a
 
more
 
powerful
 
transmitter
 
in
 
the  
geographical

 
area.
The
 
environment
 
(hills,
 
buildings,
 
tunnels,
 
basement
 
car
 
parks...)
 
block
 
reception,

 
including
 
in
 
RDS
 
mode.
This
 
phenomenon
 
is
 
normal
 
and
 
does
 
not
 
indicate  
a

 
fault
 
with
 
the
 
audio
 
system.
The
 
aerial
 
is
 
absent
 
or
 
has
 
been
 
damaged
 
(for
 
example
 
when
 
going
 
through

 
a
 
car
 
wash
 
or
 
into
 
an
 
underground
 
car
 
park).
Have
 
the
 
aerial
 
checked
 
by
 
a
 
CITROËN
 
dealer.
I
 
cannot
 
find
 
some
 
radio
 
stations in the list of
stations

 
received.
The
 
station
 
is
 
not
 
received
 
or
 
its
 
name
 
has
 
changed
 
in
 
the
 
list.
Some
 
radio
 
stations
 
send
 
other
 
information
 
in
 
place
 
of
 
their
 
name
 
(the
 
title

 
of
 
the
 
song
 
for
 
example).
The
 
system
 
interprets
 
this
 
information
 
as
 
the
 
name
 
of
 
the
 
station.
The
 
name
 
of
 
the
 
radio
 
station

 
changes.