..... N
r-N "': ..... \!) Ll'I
N Ll'I .....
(!) Adjuster control for outside mirrors .. .. .............. ... .
@ Door handle
@ Power locking switch
© Switches for:
- Front lid release ........... . .
- Fuel filler flap release ... .. .. .
® A ir outlets ............ .... .. .
® Light switch ........... .... .. .
(J) Turn signal and high beam . .. . . .
@ Multifunction steering wheel with :
- Horn
- Driver's airbag ....... .. .. .. .
- Audio, telephone and voice con-
trol system operating buttons
® Instrument cluster
@ Switches for:
- Windshield wiper/washer
- Trip computer ........ .. .. .. .
- Menu display .............. .
- Lap Timer ........... .. .. .. .
- Speed warning system ... .. .. .
@ Steering lock/ignition/starter
switch (in the steering wheel col- umn) .. . .... ............. .. .
@ Adjustable steer ing column .. .. .
@ Cruise control ............... .
(§ Instrument lighting .... .. .. .. .
@ Data Link Connector (DLC) for On
Board Diagnostics (OBD II) ... .. .
49
31
32
153
63
46
47
106
8
51
21
22
25
69
66
66
71
49
26
@ Power window switches
@
@
@
@
@
@ Navigation system
Glove compartment (lockable)
Front passenger's airbag ...... .
Rear window defogger switch ...
Climate controls .. .......... . .
Gear shift lever or selector lever (S
tronic):
- Manual transmission
- S tronic ..... .............. .
@) Switches for:
- Audi magnetic ride
- E lectronic Stabilization Control
- Emergency flasher .......... .
- Retractable rear spoiler ...... .
- Parking system ............ . .
@ Convertible top switch ........ .
@
@ Rear window switch
Parking brake lever
(D Tips
Cockpit
34
60
106
64
61
75
72
134 48
138
80
38
40
68
- Some of the equipment or features shown
in the general illustration may be standard
equipment on your vehicle or my be option
al equipment depending on your mode l.
- A separate brochure is p rovided for your fac
tory-installed audio system and/or the Audi
Navigation System.
7
Instruments and warning/indicator lights
"t:::1: ~MI ii
12
Tir e p ress ure monito ring system
¢page 196
Electron ic power control../
¢page 16
USA models: Malfunction Indicator
Lamp (MIL) ¢
page 17
Canada models: Malfunction Indica
tor Lamp (MIL)
¢ page 17
Engine speed limitation *
¢page 17
Check engi ne oil level
¢ page 17
Engine oil senso r malfunction
¢page 17
Batte ry,/
¢ page 14
Low fuel leve l
¢page 17
Windshield washer flu id leve l low
¢page 17
Defective light b ulb
¢page 17
USA models: Defective bra ke light
¢page 17
Canada models: Defective bra ke
light ¢
page 17
Light/rain sensor defective (a utomat
ic headlights) * defective
¢ page 18
Aud i magne tic ride
¢ page 18
Rear spoiler .I
¢page 18
USA models: Speed wa rn ing 1
¢ page 69
Canada models: Speed war ning 1
¢page 69
USA models: Speed warning 2
¢page 69
Canada models: Speed warn ing 2
¢page 69
Gear box mal function *
¢page 78
Other indicator light s
Turn signals
¢ page 18
USA models : Cruise control activate d
¢page 19
BRAKE/ ((D) Brake system
This w arning/in dica tor light illumina tes when
the broke fluid level is too low or when there is a
malfunction in the ABS, or when the parking
brake is set .
If the . (U SA models) . (C anada mo de ls)
symbol f las hes i n the display with t he pa rking
b rake re leased, the re is a malfunction in the
brake system. In addit ion to the symbo l, one of
two messages appears in the display:
Stop vehicle and check brake fluid level
Stabilization program and ABS fault! S ee Own
er's manual
~ Pull off the road an d stop th e veh icle .
~ Obta in p rofess io na l assis tan ce .
USA mod els: if there is a ma lfunction in the ABS
system, the. warn ing/ indicato r light illum i
na tes a long w ith the . system ma lf u nction
war ning/ind icator light¢ ,&. .
Canada models: if there is a malfunction i n the
ABS system, the
EiJ warn ing/ indica tor ligh t il lu
minates together with the. brake syst em mal
f unc tion war ning/ indica to r lig ht ¢,&. .
The light
1111 ( U SA)/ . (Canada) illum inates
whe n the ign ition is turned on. I t goes o ut afte r
the engin e has be en sta rted and th e p arkin g
brake is fully re leased. This ind icates that th e
br ake warn ing lig ht is func tioning properly.
If the brake warning light does not light up
when the engine is cranking or the parking
brake is applied, there may be a malfunction in
1111>
Instrument s and warning /indicator ligh ts
..... N
r-N "':
@ Tips
If this warning/indicator light illuminates
while you are dr iving, then there is a malfunc
tion in the en gine electronics. Have the ma l
function corrected as soon as p ossible by your
author ized Audi dealer or qualified workshop .
~ Malfunction Indicator Lamp (MIL)
The Malfunction Indicator Lamp (MIL) is part of
the On-Board Diagnostic (OBD II) system . The
symbo l
II lights up when the ign ition is turned
on and w ill tur n off after the engine has sta rted
and has sett led at constant idle speed. This indi
cates that the MIL is working properly.
The warning light illuminates when there is a
mal funct ion in the eng ine e lectronic system.
Contact your author ized Audi dealer and have the
malfunct ion corrected .
An improperly clo sed fuel fill er cap m ay al so
cau se th e MIL light to illuminate¢
page 153.
For more info rmat ion ¢ page 26.
!?' Engine speed limitation
Maximum
6000 RPM
T he engine speed is automatically lim ited to
6000 RPM. This protects t he engine from over
heat ing .
The engine speed limit ation
(Pl deac tivates once
the eng ine is no longer in the cr it ica l tempe ra
ture range and you have released the accelerator
pedal once.
When cold, the engine speed is limited to
6000 RPM (with the
VlO engine) o r
7000 RPM (with the V8 eng ine) to protect the
eng ine . T he limit is deac tivated once the o il
t em pera ture rises above 140 ° F (60 °C) and
t he engine is a t ope rat ing temperature .
~. Checking the engine oil level
; El Plea se add max. 1 qt of eng ine oil!
N
"' .....
If the Ell symbo l comes on, add 1 quart (I liter)
of oil at the next opportunity¢
page 160.
~"' Engine oil sensor defective
If the . symbo l ill um inates, contact your au
thori zed Audi dea ler and have the oil sensor in
spected.
B) Fuel supply too low
When the 00] symbol ill uminates, this means
there a re about 2 .6 gallons (10 liters) of fuel left
i n the fue l tank. Time to refue l! ¢
page 152.
If the symbol lights up , even when there is ample
fuel in the tank , and the text
Tank system mal
function! Please contact workshop
appea rs in
t h e d isplay, there is a fa ult in the system. Contact
a q ual ified wor kshop to h ave the faul t rec tified.
© Windshield washer fluid level too low
If the II symbo l ill uminates, add windsh ield
washe r fl uid to t he washer system
¢ page 168.
~ Defective light bulb warning
If a defective bulb has been detected by the sys
tem or a lig ht bulb burns out, the
J:J symbo l
wi th a message appears in the disp lay to tell you
which bulb is burnt out and w here it is located .
For example :
Rear left turn signal
After 5 seconds , the message disappears . If you
want to recall the message i nto the display, press
the CH ECK button ¢
page 8, fig. 3 (j).
The re a re three reasons w hy the defective bulb
message wou ld appear in t he display:
- The light bu lb has bur nt o ut
¢ page 211.
-The f use is "blown" <=-> page 210, Replacing
fuses.
- The wire co nnect ion to the light bulb is defec-
t iv e .
Have the bulb repl aced or the connect ion re
paired by your authorized Aud i Service depart
me nt.
17
Instruments and warning/indicator lights
A WARNING
- Light bulbs are pressurized and cou ld ex
plode while they are being changed causing
serious persona l injury.
-
- Work with due care when handling the high
vo ltage section of gas discharge (xenon)
lamps. Fa iling to do so could result in death
or serious injury!
BRAKE LIGHT!< ®> Brake light defective
In case of a malfunction or component failure,
the symbol
!:ljf:Ul•@:U (USA models)/ ll] (Canada
models) can appear. The following electrical
components should be checked, repaired or re
p laced, as necessary:
- Brake light bulbs
- All wiring connections
- Brake light switch
Con tact your authorized Audi dealer for assis
tance if necessary.
(D Tips
The brake light switch is only inspected as
part of the functional check after the engine
is started.
/i. O
Light/rain sensor defective
Applies to veh icles: w ith automatic headlights
If the symbol illuminates, the light sensor has
fai led. For safety reasons, the low beams are
turned on permanently with the switch in
AUTO.
However, you ca n continue to turn the lights on
and off using the light switch . In the case of a de
fect in the ra in sensor, the windshield wiper lever
functions are still available . Have the light/ra in
sensor checked as soon as possible at an author ized Audi dealer.
; Audi magnetic ride
The indicator light monitors vehicle damping.
The indicator light B illuminates when the igni
tion is sw itched on as a function check.
18
(D Tips
If the indicator lamp illuminates whi le you are
driving, there is a malfunction in the vehicle
damping. The chassis should be inspected im
mediately by an authorized Audi dealer.
-::}. Rear spoiler
The warning/indicator light monitors the electri
cally retractable rear spoiler.
The warning/indicator light I! has the fo llowing
funct ions :
- It comes on for about 3 seconds as a function
check when the ignition is switched on.
- It comes on if there is a malfunction in the elec
trically retractable rear spoiler.
Additional informat ion about the e lectr ically re
tractable rear spoiler
~ page 138.
ill Tire pressure monitoring system
Applies to vehicles: with tire pressure monitoring system
Tire pressure that is too low must be corrected
as soon as possible.
The warning/indicator light [IJ illum inates for a
few seconds after the ignition is turned on as a
function check. If the
[IJ warning light comes on,
pressure in at least one tire is too low.
.. Stop driving as soon as possible w ithout endan -
gering yourself and other dr ivers on the road .
.. Inspect all tires .
.. Correct the tire pressure ~
page 179.
Additional informat ion about the tire pr essure
monitoring system
can be found~ page 197 .
¢ Q Turn signals
The indicator light blinks when you use either
turn signal .
Whenever you use the left B or the right R
turn signal, the indicator light blinks. When you
use the emergency flasher, both indicator lights
flash .
Iii>
..... N
r-N "': ..... \!) ..,.,
N ..,., .....
Instruments and warning/indicator lights
If one of the turn signal light bulbs burn out, the
turn signal wi ll blink twice as fast as normal.
Addit ional info rmation on the turn signals
~page 47.
CRUISE/ 0 Cruise control
The @;(1)~14 (USA models)/ . (Canada models)
warning/indicator light illuminates when the
cruise control is activated .
19
Drive r in formation syste m
fastest lap"+", the slowest lap"-" and the aver
age lap time "0" .
.. To continue t iming for additional laps, press
the wiper switch @ .
.. To reset the timer to zero, press and hold the
I RESET I button again for approximate ly 2 sec
onds .
.,. To sw itch the lap timer off comp letely, press
the
I RES ET I button br iefly.
@ Tips
- Saved lap t imes cannot be ind ividually de
l eted from the total results.
- The saved lap timer values will not be lost
after turn ing the ignit ion off.
On-Board Diagnostic
system (OBD)
Malfunction Indicator Lamp (MIL)
The Malfunction Ind icator Lamp (MIL)
llil is part
of the On-Board Diagnostic (OBD II) system .
The warning light illuminates when there is a malfunct ion in the engine electronic system . A
malfunct ion may have various causes:
- The fuel filler cap may be improperly closed
¢ page 153.
- T here is a leak in the fuel vapor recovery sys
tem .
- The engine control receives faulty vehicle road-
speed signals.
Contact your nearest authorized Audi dealer for
assistance.
I f the light illuminates , the catalyt ic converte r
could be damaged. Continue dr iving
w ith re
du ced pow er
(avoiding sustained high speeds
and/or rapid accelerations) and have the condi
tion corrected.
An improper ly closed fuel filler cap may also
cause the MI L light to illuminate
¢ page 153.
26
On-Board Diagnostics
Fig. 19 Locatio n of Data Li nk Co nnector (DLC)
On-Board D iagnostics monitors the components
of your emission control system. Each monitored component in your engine system has been as
s igned a code. In case of a malfunct ion, the com
ponent will be ident ified and the fault stored as a
code in the control module memo ry.
In order to make an accurate diagnosis, the stor
ed data can only be d isplayed using spec ia l diag
nostic equipmen t (generic scan tool for OBD) .
In order to connect the special diagnostic equip ment, push the plug into the Data Link Connector
(DLC) ¢
fig. 19.
Your authorized Audi dealer or a qualified service
station can interpret the code and perform the
necessary repair .
A WARNING
Do not use the d iagnost ic connector for per
sona l use. Incorrect usage ca n cause ma lfunc
tions, which can increase the r isk of a coll i
sion!
-
Opening and closing
@ Tips
- The dr iver's door can be locked and un
l ocked with the key if the power locking sys
tem fails. The passenger 's door can be
l ocked manually
c:> page 32.
- In the event of a crash with airbag deploy
ment all loc ked doors will be automatically
unlocked to give access to the vehicle occu
pants from the outs ide .
- The anti-t heft alarm system cannot be acti
vated if the power locking system is not ac
tivated .
- You are well advised not to keep valuables
i nside an unattended vehicle, v is ible or not.
Eve n a prope rly locked veh icle cannot p ro
v id e the secur ity of a safe!
Unlocking and locking the vehicle with the
remote control
How the remo te control works.
F ig. 2 3 Remote co ntrol: fun ctio n butto ns
Whether only the d river's doo r or the entire veh i
cle is unlocked when the opening button @ is
pressed once, depends on the settings in the
Driver information system
Central locking menu
~ page 22 .
To unlock the vehicle III
• Press button @.
• Press but ton @ two
times w ith in two seconds
to unlock all doors and the front lid .
To lock the vehicle
~
• Press button @~.&. in General description on
page 29 .
• Watch that all turn signal lights flash once.
30
To unlock front lid only~
• Press bu tton © for approxima tely one se con d.
PANIC Button
• Push the red button @to activate t he panic
fu nction . The horn sou nds an d the turn signa ls
fla sh.
• Push the button @aga in t o de acti va te the pan-
ic fu nct io n.
The remote cont ro ls allows you to:
- lock or unlock the vehicle
- select ively un lock the front lid.
The turn signa ls will flash brief ly whenever you
l ock or u nlock the veh icle. Also, the interior light
will come on o r go off whenever yo u open or
close the driver's door.
The transm itter and battery are located in the
head of the remote contro l. The receiver is locat
ed inside the vehicle . The maximum effective
range depends on severa l things . Remembe r, if
the battery is weak, the effect ive range decreas
es .
The remote -cont ro l key contains a fo ld-out key
that you can use to man ually lock or unlock t he
vehicle and to start the eng ine .
I f you need to replace the remote control , or if
you need to have it repaired, you must see your
authorized Aud i dea ler. Only then can yo u use the
key agai n.
A WARNING
Read and follow all WARNI NGS c:> & in Gener
al description on page 29 .
(D Tips
- The remote control key is automatically de
act ivated when the ignition is sw itched on.
- The operation of the remote contro l key can
be temporarily d isrupted by interference
from transmitters in the vicinity of the vehi
cle wo rking in the same freque ncy ra nge
(e.g . a cell phone, radio eq uipment).
- In orde r to make su re the locking function is
wor king, you should a lways keep yo ur eye
II>
.... N
l'
N "1: .... I.O
"' N
"' ....
The leavin g home function i lluminates the area
around the vehicle when un locking it .
A WARNING
-Never use daytime running lights to see
where you are going. They are not bright enough and w ill not let you see far enough
ahead for safety, especially at dusk or when it is dark . Be aware of changes in outside
light cond itions when you are dr iv ing and re·
spond by switching on your low beams.
- Automatic head· and taillight control is only
intended to assist the d river. This feature
does not relieve the driver of his responsibi l
ity to check t he headlights a nd to turn t hem
on manually according to the cur rent lig ht
and visibility conditions. For example, fog
and rain cannot be detected by the light
sensors. Consequent ly, always switch the
headlights on under these weather cond i·
tions and when dr iv ing in the da rk.
- Crashes can happen when yo u cannot see
the road ahead and when you cannot be
seen by other motorists.
- Always turn on the headlights so that you
can see ahead and so that others can see
your car from the back.
- Please observe lega l regulations when using
the light ing systems described .
@ Tips
-Always observe the specific local regulations
for your area when to use your lights.
- Turn on low beams as evening app roaches
or in conditions of poor visib ility.
- Do not attach stickers to the windshie ld in
front of the sensors as this can disab le the
automat ic head- and taill ight control and
the automatic glare-dimming of the rear·
v iew mirror(s) *.
- If you remove the ignit ion from the ign it ion
lock while the headlights are still on, a buz
zer w ill sound as long as the dr iver's door is
open to remind you to t urn off the lights .
- In the AUTO mode, the low beams are
turned off when the ignition is t urned off.
The remaining lights ar e turned off when
t h e key is taken ou t of the ignition.
Cle ar vi sion
-In cool or damp weather conditions the
head lights may fog
over temporarily on the
inside .
- The c ritical factor is the temperature dif
ference between the inter io r and the exte·
rior of the hea dlight lens .
- W ith the mai n beams switched on, the
lig ht-em itting area w ill be free of conden
sation after a short time, however the
e d ges of the glass may still be fogged.
- This physical phenomeno n has no effect
on the life of your veh icle's lighti ng sys
tem .
Turn signals and high beam lever
The lever on the left side of the steering column
is used to operate the turn signals and the high
beam as well as the headlight flasher.
t
t
Fig . 56 Turn signal and high bea m leve r
The turn signa l and high beam lever has the fo l
lowing functions :
Turn signal s¢¢ ©@
.,. Push the lever up as far as it can go to t urn on
the right turn signa l or down to turn on the left
turn signal
q fig. 56.
.,. Move the lever br iefly u ntil you meet res istance
and re lease it to flash three times.
.,. Move the lever (up or down) until you meet re
sistance and hold it there to determine the
flash ing time fo r the turn signa ls .
High beam ~D @
.,. Push the lever forward to sw itch on the h igh
beam.
.,. Pull the lever back towards yo u to switch off
the high beam.
47