Page 25 of 232

.... N
l'
N "1: rl I.O
"' N
"' ....
Set Clock ¢ page 23
Tire pressure c::> page 196
Computer c::> page 2 3
Speed warning c::> page 70
Language c::>page23
Units (distance, fuel consumption,
temperature)
c::> page 23
Lap timer c::> page 25
Lights c::> page 46
Wiper (service position)
c::>page 53
Doors (unlocking and locking
mode, for example Auto-loc k)
c::> page 29, ¢ page 29
Chec k Service c::> page 24
Chassis number c::>page 212
Keys
Menu off The menu display is hidden and
the lap time r appears.
Navigating the menu
Use the rocker switch on the windshield wiper
lever and the
I RESET ! button to operate the
menu and carry out inquiries and selections.
-----®
Fig. 12 Wiper lever: Cont rols fo r th e menu d isplay
Fi g. 13 Display: Start menu
Dr iver inform atio n sy stem
I Reset I button @ and rocker switch @ c::> fig. 12
functions:
To open the menu
• Press the I Reset I button @ until the menu d is
play
c::> fig . 13 appears
Selection s and settings
• Press the rocker switch @ to reach a menu dis
play . The switc h is operated the same as the
disp lay (up/down).
Entering and confirming
• Press the I RESET ! button@.
Returning to the Start menu
.. Press the I RESET ! button longer than 2 seconds
to return from any menu level to the Start
menu.
U sing the rocke r switch, you can select the menus
in the disp lay or change settings . A c ursor ap
pears on the left in front of the selected va lues.
By pressing the
! RESET I button, you activa te the
selection yo u made or confirm the values you set .
Selected fu nctions are identified with a check
mark or are car ried out directly.
Selecting settings
The Driver Information System settings are
menu-guided.
Fi g. 14 Display: Me nu Sett ings, computer selected (page
1)
.. Press the I RESET ! button. The Start menu ap
pears
c::> fig . 14 .
.. Press the rocker switch until Set is displayed.
.. Press the
I RESET ! button. All the menus appear. Ill-
23
Page 26 of 232

Driver information system
• Press the rocker switch until the desired line is
highlighted (cursor)~
fig. 14.
• Press the !R ESE T I button.
• If necessary, scroll by se lecting and activating
the symbol for "Next page" or "Previous page".
When you have selected the Computer menu and
activated it by p ressing the
! RESET I button, two
computer levels appear (computer 1 and comput
er 2) . Now you have to select the level you want
using the rocker switch and activate it with the
I RESET I button .
Service interval display
The service interval display reminds you when
your next service is due.
Fig. 15 Sectio n of inst rument cl uster: Serv ice in terva l dis
pl ay
The schedule for the next oil change or inspec
tion is calculated automatically and displayed ac
cording ly. The display works in two stages:
Service reminder
30 days before the next service is due, a serv ice
reminder appears in the display when you turn on
the ignition.
After about 5 seconds the display sw itches back
to normal. The distance and time remaining are
updated each time the ignition is turned on unti l
the date due for serv ice is reached.
Service due
When the due date for service is reached , the
mes sage
Service due! appears in the instrument
cluster immediately after you turn on the igni
tion . Additionally, a warning tone sounds. After
24
about 5 seconds the display switches back to nor
mal.
Calling up the service schedules
If or when an oil change or inspection is due, can
be shown in the instrument cluster by select ing
the se rvice interval display. Select
Check> Serv
ice
> Oil change or Service by using the I RESET I
button and the rocker switch ¢ page 23, fig. 12.
Resetting the service interval display
Your authorized Audi dealer will reset the corre
sponding service schedule after performing the
appropriate service on your vehicle . You also have
the possibility to reset the oil change schedule af
ter having performed an oi l change according to
Audi specifications.
- Switch the ignition on.
- Pull the knob<>
fig. 15. The message. Service
due!
appears.
- Pull the knob until the display
Oil change in
-----mi (km)---days appears. If the I RESE T I
button is not pulled with in 5 seconds, the dis
play reset mode closes.
(D Note
-Only reset the oil change display when you
have completed an oil change.
-If you disconnect the battery terminals, no
calculations can be made for the service in
terval display during this time and no serv
ice reminder will appear. Remember that
observing the proper service intervals is vi
tally important to extend ing the life of your
vehicle, particularly the engine, and main
taining its va lue. Even if the mileage driven
is low, the maximum per iod of one year
from one service to the next must not be ex
ceeded.
@ Tips
The information in the Service Reminder re
mains stored even when the vehicle battery is
disconnected .
Page 27 of 232

.... N
l'
N "1: .... I.O
"' N
"' ....
Lap timer
Introduction
You can record and evaluate lap times with the
lap timer in the display¢
page 25, fig. 17. The
time is measured in minutes, seconds and 1/10
seconds. The hours are also shown when the lap
time exceeds
60 minutes . The maximum individ
ua l measurement is
99 hours.
A WARNING
Please devote your full attention to driving.
As the driver, you have complete responsib ili
ty for safety in traffic. Only use the functions
in such a way that you always ma inta in com
plete control over your vehicle in all traffic sit
uations.
0) Tips
When the lap t imer stopwatch is running, you
can call up the trip computer information
w ith the
! RESET I button.
Calling up the lap timer and timing
A ppl ies to vehicles: with la p t ime r
'---- ®
Fig. 16 Controls
Fig. 17 D isplay: Lap timer
Driver inform atio n sy stem
Calling up the lap timer
.,. Press the I RESET !¢ fig. 16 @ button until the
lap timer ¢
fig. 17 appears.
Timing laps
"' To start timing, press the upper section of the
w iper sw itch @. The time meas urement is
shown in line(!)¢
fig. 17.
.,. To stop timing, press the upper section of the
wiper switch @again. This a lso starts timing
the next round. The previous time moves one
line up, first to line @and then to line@. Line
@ shows the current lap number, for example
LAP 5.
Di splaying inte rm ed iat e time and pau sing
timing
"' To display an intermediate time, press the low
er section of the wiper switch@. The inter
mediate time appears in line(!) and is marked
w ith *.
"' To pause timing, press the lowe r section of the
w iper sw itch @again.
"' To conti nue tim ing, press the uppe r section of
t he wiper swi tch @ .
If timing is paused, you can continue it later even
if you sw itch the igni tion off.
Evaluating times and continuing or
resetting timing
You can evaluate the fastest, slowest and aver
age lap times.
LAP 5
+ 45:12 .9
59:08.8
9J 51:10.8
F ig. 18 Display: lap time evaluat ion
"' To evaluate lap times, press and ho ld the
IRESE TI ¢ page 25, fig . 16 @ button for ap-
proximately 2 seconds. The display shows the
Iii>
25
Page 28 of 232

Drive r in formation syste m
fastest lap"+", the slowest lap"-" and the aver
age lap time "0" .
.. To continue t iming for additional laps, press
the wiper switch @ .
.. To reset the timer to zero, press and hold the
I RESET I button again for approximate ly 2 sec
onds .
.,. To sw itch the lap timer off comp letely, press
the
I RES ET I button br iefly.
@ Tips
- Saved lap t imes cannot be ind ividually de
l eted from the total results.
- The saved lap timer values will not be lost
after turn ing the ignit ion off.
On-Board Diagnostic
system (OBD)
Malfunction Indicator Lamp (MIL)
The Malfunction Ind icator Lamp (MIL)
llil is part
of the On-Board Diagnostic (OBD II) system .
The warning light illuminates when there is a malfunct ion in the engine electronic system . A
malfunct ion may have various causes:
- The fuel filler cap may be improperly closed
¢ page 153.
- T here is a leak in the fuel vapor recovery sys
tem .
- The engine control receives faulty vehicle road-
speed signals.
Contact your nearest authorized Audi dealer for
assistance.
I f the light illuminates , the catalyt ic converte r
could be damaged. Continue dr iving
w ith re
du ced pow er
(avoiding sustained high speeds
and/or rapid accelerations) and have the condi
tion corrected.
An improper ly closed fuel filler cap may also
cause the MI L light to illuminate
¢ page 153.
26
On-Board Diagnostics
Fig. 19 Locatio n of Data Li nk Co nnector (DLC)
On-Board D iagnostics monitors the components
of your emission control system. Each monitored component in your engine system has been as
s igned a code. In case of a malfunct ion, the com
ponent will be ident ified and the fault stored as a
code in the control module memo ry.
In order to make an accurate diagnosis, the stor
ed data can only be d isplayed using spec ia l diag
nostic equipmen t (generic scan tool for OBD) .
In order to connect the special diagnostic equip ment, push the plug into the Data Link Connector
(DLC) ¢
fig. 19.
Your authorized Audi dealer or a qualified service
station can interpret the code and perform the
necessary repair .
A WARNING
Do not use the d iagnost ic connector for per
sona l use. Incorrect usage ca n cause ma lfunc
tions, which can increase the r isk of a coll i
sion!
-
Page 29 of 232

Opening and closing Keys
Key set
F ig. 20 Key set
Fig. 21 Remote master key : Indicator l ight
@ Ma ste r key with r em ote control
You can centra lly lock and unlock your vehicle and
start the engine with the master key with remote
control. To fold the key out and back in place,
press the release button
c:;, fig. 20 (arrow) .
@Vale t key
The valet key only fits the lock in the driver's door
and the ignition lock. If you have to leave the key
with somebody e lse, you are well-advised to turn
over the valet key o nly.
Be aware that the front lid and glove compart
ment can be opened from ins ide the vehicle using
the release buttons.
© Emergency k ey
The emergency key is only for temporary use if
;::: the vehicle key should be lost or misplaced.
l'N "1: rl I.O
"' N
"' rl
Open ing and clo sing
Key replac ement
If you lose a key, contact you r a uthorized Audi
dealer immed iate ly to have the
Lost key disab led .
Be sure to bring all your keys with you.
If a key is lost, you should report it to your insur
ance company.
Reg istered keys
You can inquire about the number of remote
master keys registered to your vehicle
c:;, page 22 .
In this way, you can be ce rtain of obta ining all
the remote master keys if yo u purchase a used
vehicle.
State of master key battery
When a button is pressed, the check light f lashes
c:;, fig. 21. If the check light does not come on or
flash, the battery is dead and has to be replaced.
Battery replacement
c:;, page 28.
A WARNING ..__
- Do not leave your vehicle unattended with
the key in the ignition lock. Entry by u nau
thor ized persons could endanger you or re
sult in theft or damage the vehi cle. Always
lock all doors a nd take the key .
- D o not leave ch ildren unattended in the ve
h icle, espe cially wi th access to vehicle keys.
Ungua rded access to the keys provides chil
dren the opportunity to start the engine
and/or activate vehicle systems such as the power windows etc. Unsupervised operation
of any vehicle system by children can result
i n ser ious injury.
@ Tips
- If you open the driver's door with the key
left in the ignition lock, a chime will so und.
Th is is your rem inder to remove the key and
lock the door.
- For security reasons, rep lacement keys are
only avai lable from Audi dealers.
-
27
Page 30 of 232

Opening and closing
Master key with remote control
The remote control allows you to lock or unlock
the vehicle electronically .
The transmitter and battery are located in the
head of the remote control. The receiver is locat
ed inside the vehicle . The max imum effective
range depends on several things . Remember, if
the battery is weak, the effective range dec reas
es .
If you need to replace the remote control , or if
you need to have it repaired, you must see your author ized Audi dealer. Only then can you use the
key again .
0) Tips
-If the ignition is sw itched on, the remote
control system is deact ivated.
- The remote control system can be affected
by other systems operating in the same fre
quency range close to the vehicle, such as
mobile te lephones, television broadcasting
stations, etc.
- For Declaration of Compliance to United
States FCC and Industry Canada regulations
¢page 218.
Master key battery replacement
Each master key contains a battery housed un
der the cover.
Fig. 22 Remote master key: opening t he cove r
• Pry apart the base¢ fig. 22 ® and the cover @
carefully with a coin.
• Remove the cover (arrow) .
• Remove the dead battery from the cover .
28
• Insta ll the new battery . Please make certain
that the" +" sign on the battery faces down in
the cover . Correct polarity is shown on the cov
er.
• Place the cover with the new battery on the key
base and press both parts together .
@ For the sake of the environment
D ispose of dead batteries properly so as not
to pollute the environment.
@ Tips
The replacement battery must be the same
specification as the original.
Electronic immobilizer
The immobilizer helps to prevent unauthorized
use of your vehicle.
A comp uter chip inside your key automatical ly
deactivates the electronic immobilizer when you
insert the key in the ignition lock. When you re
move the key from the ignition lock, the electron
ic immobilizer is automatically activated once
again .
A WARNING
Always take the key with you when you leave
the vehicle. The key can disarm the electronic
engine immobilizer and perm it an unauthor
ized person to start the engine and enab le op
e rat ion of t he vehicle systems such as power
window leading to serious personal injury.
{D Tips
- The veh icle cannot be started if an una u
thorized key is used. The vehicle may not
start if another radio device such as a key
for another veh icle or a transponder is locat
ed on the key ring.
- For Declaration of Compliance to United
States FCC and Industry Canada regulations
r::>page 218.
Page 31 of 232

..... N
r-N "': ..... \!) 1.1'1
N 1.1'1 .....
Power locking system
General description
The power locking system locks or unlocks all
doors simultaneously.
The power lock ing system i n your veh icle incorpo
rates the follow ing funct ions:
- Central lock ing function
- Remote contro l feature ¢ page 28.
- Ant i-Theft Alarm Sys tem ¢ page 33.
All the doors and the front lid are loc ked by the
centra l locking system when you lock the vehicle.
The unlocking and lock ing mode* can be changed
i n the dr iver information system
¢ page 22.
Unlocking the vehicle
You can un lock the vehicle from outside either by
usi ng the remote co ntrol
or by insert ing and
turning the key in the driver's door lock. When
you
unlock your vehicle:
- The anti -theft alarm system is deactivated
briefly.
- The veh icle inter ior lights ill uminate for app rox
imately 30 seconds .
- All t urn signa l lights will flas h twice when the
ca r is un locked .
- After unloc king the veh icle, you have 30 sec
onds to open a door or the front lid. After 30 seco nds, the vehicle automatically locks and
the anti-theft a larm system activates again.
The fron t lid can be locked or un locked e ither by
usi ng the remote contro l
or by inserting and
turning t he key in the driver's door lock . Unlock
ing the vehicle with the remote control~ will
only unlock the front lid, to open it, the lid han
d le needs to be pressed.
Loc king the vehicle
You ca n lock the vehicle from o utside eithe r by
using the remote co ntro l
or by insert ing and
turning the key in the drivers's door lock. When
you
lock the vehicle:
- All doors and the front lid are locked.
- All turn sign al ligh ts will flash once whe n the
car is locked .
Opening and closing
-The ant i-theft a larm system is ac tivated. The
horn of the anti-theft a la rm system will soun d
and the anti-theft alarm system read iness
light, located in the center of the instrument
pane l be low the windshield on the right side of
the air vent, will start to bli nk.
- The vehicle in terior lights turn
off.
Automatic locking*
The automatic locking feature loc ks a ll the vehi
cle doors and the front lid when you dr ive faste r
t h an 9 mph (15 km/h).
You can unlock t he veh icle from the i nsi de by:
- remov ing the key from the ignition switc h (the
ve hicle w ill automat ica lly unloc k itself) or
- pressing the unlock pa rt of th e power lock
sw itch
ccri o r
pull ing the door handle (to open the door).
If you wish, yo u can have an a utho rized Aud i
dealer convert your powe r doo r lock system to
automat ic locking.
Unintentionally locking yourself out
T he vehicle does not lock with t he centra l locking
swi tch ¢page 31 if the dr ive r's door is open.
D o no t lock your ve hicle w ith the
remote master
key u ntil all doors an d the front lid a re closed. In
t hi s way you avo id loc king yo ursel f out ac ciden
ta lly.
A WARNING
-
- W hen you loc k yo ur vehicle from o utside,
nobody- espec ia lly children -shou ld remain
inside the vehicle. Remember, when you
lock the vehicle from the outside the win
dows cannot be ope ned from the inside.
- W hen you leave the veh icle, always remove
the ignition key and take it with you. This
will prevent passengers (children, for exam
p le) from accidenta lly bei ng locke d in th e
veh icle should they accide ntally press the
power l ocking sw itc h in one of the doo rs .
- Do not leave ch il dr en inside t he vehicle un
s upe rvise d. In a n em erge ncy it would be im
p o ssible to open the door s fro m the outs id e
wit ho ut t he key.
~
29
Page 32 of 232

Opening and closing
@ Tips
- The dr iver's door can be locked and un
l ocked with the key if the power locking sys
tem fails. The passenger 's door can be
l ocked manually
c:> page 32.
- In the event of a crash with airbag deploy
ment all loc ked doors will be automatically
unlocked to give access to the vehicle occu
pants from the outs ide .
- The anti-t heft alarm system cannot be acti
vated if the power locking system is not ac
tivated .
- You are well advised not to keep valuables
i nside an unattended vehicle, v is ible or not.
Eve n a prope rly locked veh icle cannot p ro
v id e the secur ity of a safe!
Unlocking and locking the vehicle with the
remote control
How the remo te control works.
F ig. 2 3 Remote co ntrol: fun ctio n butto ns
Whether only the d river's doo r or the entire veh i
cle is unlocked when the opening button @ is
pressed once, depends on the settings in the
Driver information system
Central locking menu
~ page 22 .
To unlock the vehicle III
• Press button @.
• Press but ton @ two
times w ith in two seconds
to unlock all doors and the front lid .
To lock the vehicle
~
• Press button @~.&. in General description on
page 29 .
• Watch that all turn signal lights flash once.
30
To unlock front lid only~
• Press bu tton © for approxima tely one se con d.
PANIC Button
• Push the red button @to activate t he panic
fu nction . The horn sou nds an d the turn signa ls
fla sh.
• Push the button @aga in t o de acti va te the pan-
ic fu nct io n.
The remote cont ro ls allows you to:
- lock or unlock the vehicle
- select ively un lock the front lid.
The turn signa ls will flash brief ly whenever you
l ock or u nlock the veh icle. Also, the interior light
will come on o r go off whenever yo u open or
close the driver's door.
The transm itter and battery are located in the
head of the remote contro l. The receiver is locat
ed inside the vehicle . The maximum effective
range depends on severa l things . Remembe r, if
the battery is weak, the effect ive range decreas
es .
The remote -cont ro l key contains a fo ld-out key
that you can use to man ually lock or unlock t he
vehicle and to start the eng ine .
I f you need to replace the remote control , or if
you need to have it repaired, you must see your
authorized Aud i dea ler. Only then can yo u use the
key agai n.
A WARNING
Read and follow all WARNI NGS c:> & in Gener
al description on page 29 .
(D Tips
- The remote control key is automatically de
act ivated when the ignition is sw itched on.
- The operation of the remote contro l key can
be temporarily d isrupted by interference
from transmitters in the vicinity of the vehi
cle wo rking in the same freque ncy ra nge
(e.g . a cell phone, radio eq uipment).
- In orde r to make su re the locking function is
wor king, you should a lways keep yo ur eye
II>