2014 TESLA MODEL S child lock

Seat BeltsSeat Belts
6MODEL S
SAFETY INFORMATION
Seat BeltsWearing Seat Belts
Using seat belts and child safety seats is the
most effective way to protect occupants if a
collision occurs. Therefore, wearing a seat belt
is required by law in most jurisdictions.
Both the driver and passenger seats are
equipped with three-point inertia reel seat
belts. Inertia reel belts are automatically
tensioned to allow occupants to move
comfortably during normal driving conditions.
The seat belt reel automatically locks to
prevent movement of occupants if Model S
experiences a force associated with hard
acceleration, braking, cornering, or an impact in
a collision.
The seat belt reminder on the
instrument panel alerts you if a seat belt
for an occupied front seat is not
fastened. If the belt remains unfastened, the
reminder flashes and an intermittent chime
sounds. If all occupants are buckled up and the
reminder stays on, refasten seat belts to ensure
they are correctly latched. Also remove any
heavy objects (such as a briefcase) from an
unoccupied seat. If the reminder light continues
to stay on, contact Tesla.
To F a s t e n a B e l t
1. Ensure correct positioning of the seat.
2. Draw the belt out smoothly, ensuring the
belt lays flat across the pelvis, chest and
mid-point of your collar bone, between the
neck and shoulder.
3. Insert the latch plate into the buckle and
press together until you hear a “click”
indicating it is locked in place. 4.
Pull the belt to check that it is securely
fastened.
5. Pull the diagonal part of the belt toward the
reel to remove excess slack.
To Release a Belt
Hold the belt near the buckle to prevent the
belt from retracting too quickly, then press the
button on the buckle. The belt retracts
automatically. Ensure there is no obstruction
that prevents the belt from fully retracting. The
belt should not hang loose. If a seat belt does
not fully retract, contact Tesla.
Wearing Seat Belts When Pregnant
Do not put the lap or shoulder sections of the
seat belt over the abdominal area. Wear the lap
section of the belt as low as possible across the
hips, not the waist. Position the shoulder
portion of the belt between the breasts and to
the side of the abdomen. Consult your doctor
for specific guidance.
WARNING: Never place anything
between you and the seat belt to cushion
the impact in the ev ent of an accident.
Model S Quick Guide - NA Rev C.book Page 6 Wednesday, December 18, 2013 12:40 PM

Seat Belts
SAFETY INFORMATION7
Seat Belt Pre-tensioners
The front seat belts are equipped with
pre-tensioners that work in conjunction with
the airbags in a severe frontal collision. The
pre-tensioners automatically retract both the
seat belt anchor and the seat belt webbing,
reducing slack in both the lap and diagonal
portions of the belts, resulting in reduced
forward movement of the occupant. If the
pre-tensioners and airbags did not activate in
an impact, this does not mean they
malfunctioned. It usually means that the
strength or type of force needed to activate
them was not present.
WA R N I N G : O n c e t h e s e a t b e l t
pre-tensioners have been activated, they
must be replaced. After any accident, have the
airbags, seat belt pre-tensioners and any
associated components checked and, if
necessary, replaced.
Testing Seat Belts
To confirm that seat belts are operating
correctly, perform these three simple checks on
each seat belt.
1. With the seat belt fastened, give the
webbing nearest the buckle a quick pull.
The buckle should remain securely locked.
2. With the belt unfastened, unreel the
webbing to its limit. Check that unreeling is
free from snags, and visually check the
webbing for wear. Allow the webbing to
retract, checking that retraction is smooth
and complete. 3.
With the webbing half unreeled, hold the
tongue plate and pull forward quickly. The
mechanism should lock automatically and
prevent further unreeling.
If a seat belt fails any of these tests, contact
Tesla immediately.
Seat Belt Warnings
WARNING: Seat belts should be worn by
all occupants at all times, even if driving
for a very short distance. Failure to do so
increases the risk of injury or death if an
accident occurs.
WARNING: Secure small children in a
suitable child safety seat (see page 9).
Always follow the child safety seat
manufacturer's instructions when installing.
WARNING: Ensure that all seat belts are
worn correctly. An improperly worn seat
belt increases the risk of injury or death if an
accident occurs (see page 6).
WARNING: Do not wear seat belts over
hard, fragile or sharp items in clothing,
such as pens, keys, eyeglasses, etc. The
pressure from the seat belt on such items can
cause injury.
WARNING: Seat belts should not be worn
with any part of the strap twisted.
WARNING: Each seat belt assembly must
be used by one occupant only. It is
dangerous to put a seat belt around a child
being carried on an occupant’s lap.
WARNING: Seat belts that have been
worn in an accident must be inspected or
replaced by Tesla, even if damage to the
assembly is not obvious.
WARNING: Seat belts that show signs of
wear (such as fraying), or have been cut
or damaged in any way, must be replaced by
Te s l a .
WARNING: Avoid contaminating a seat
belt’s components with any chemicals,
liquids, grit, dirt or clea ning products. If a seat
belt fails to retract or latch into the buckle, it
must be replaced immediately. Contact Tesla.
WARNING: Do not make modifications or
additions that can prevent a seat belt
mechanism from taking up slack, or that can
Model S Quick Guide - NA Rev C.book Page 7 Wednesday, December 18, 2013 12:40 PM

Tesla Built-In Rear Facing Child SeatsTesla Built-In Rear Facing Child Seats
14MODEL S
Tesla Built-In Rear Facing Child SeatsUsage Restrictions
The Tesla built-in rear facing child seats are
child restraint systems and must only be used
for children over 37” (94 cm) tall and weighing
between 35 and 77 lbs (16.2 to 35.2 kg).
Always ensure the top of the child’s head
cannot contact the vehicle and that the child is
seated comfortably with the seat belts
positioned and latched correctly. The child’s
pelvis must be held securely in place by the lap
belt. Follow all instructions provided and do
not use supplemental child safety seats in
these seats .

NOTE: Whenever a child is seated in the Tesla
built-in rear facing child seats, it is
recommended that you set the climate control
system to draw outside air into Model S instead
of recirculating the air. This draws more air into
the rear seating areas.
Opening
1.Remove the cover from the trunk floor and
pull the strap attached to the seat to lift the
seat assembly upward.
2. Push the seat assembly into position. 3.
Undo the Velcro strap.
4. Pull the handle to release the head supports
from the seat back, then pull the head
supports toward you to unfold them.
5. Raise the seat back to the upright position
and push until it locks into position. Visually
check to ensure that the retaining catches
are engaged.
6. Check that the seat back and seat base are
securely retained in the upright position by
trying to pull the seat back toward you.
Model S Quick Guide - NA Rev C.book Page 14 Wednesday, December 18, 2013 12:40 PM