114 Instrument Panel and Multi-Function Display
Allwheel Menu
(Porsche Traction Management PTM)
In the “Allwheel” main menu, the current torque distribution between front and rear axles is shown graphically in the form of bar diagrams.
For information on the operating principle of the PTM:fPLEASE SEE THE CHAPTER “PORSCHE TRACTION MANAGEMENT (PTM)” ON PAGE 180.
Chrono Menu (Stopwatch)
You can use the stopwatch to measure any times, e.g. on race circuits or on work-related journeys. Measured lap times can be stored and evaluated if the vehicle is equipped with Porsche Communication Management (PCM).fPlease observe the chapter “SPORT DISPLAY” in the separate PCM operating instructions.
Stopwatch on the dashboard
The stopwatch has an analog and a digital display. The large pointer of the analog display measures the seconds. The two small pointers measure hours and minutes. The display restarts at zero after 12 hours.Seconds and increments of 1/10th and 1/100th of a second can be read on the digital display. The digital display and the multi-function display can show up to 99 hours and 59 minutes.
Stopwatch timing displays
The stopwatch time is displayed at different positions on the dashboard:– In the stopwatch on the dashboard.– In the “ Chrono” menu in the multi-function display on the instrument panel.– In the “ CAR” main menu on the PCM.
Displaying the time on the stopwatch
You can configure the stopwatch on the dashboard to display the time in the multi-function display on the instrument panel.
For information on displaying the time on the stopwatch:fPlease see the chapter “DISPLAYING TIME IN STOPWATCH ON DASHBOARD” on page 125.
1. Main menu: Select “Allwheel” and confirm.
14_991_Turbo_21.book Seite 114 Mittwoch, 9. April 2014 2:19 14
116 Instrument Panel and Multi-Function Display
Storing intermediate time
You can store an intermediate time while the stopwatch is still running.
The intermediate time is displayed temporarily on the multi-function display. It is not stored.Timing continues in the background.
Stopping timing
You can stop the stopwatch at any time.
The stopwatch time B stops.
Continuing timing
You can resume timing again after stopping the stopwatch.
The stopwatch time B continues.
Resetting the stopwatch time
The stopwatch time can be reset to zero.
All stopwatch time displays are reset to zero.
G-Force Menu
In the “ G-Force” main menu, the current lateral and longitudinal acceleration forces are shown graphically in the form of a circular diagram. The maximum occurring longitudinal and lateral acceleration forces are displayed in the “ G-Force max ” sub-menu. The values can be reset via the menu item “ Reset”.
Performance Menu
Torque
In the “Performance” main menu, the current torque is displayed graphically as a function of engine speed.When “ Sport” or “Sport Plus” mode is activated, the additional on-demand torque (overboost function) appears as a white area in the curve.
For information on the overboost function:fPlease see the chapter “OVERBOOST FUNCTION” on page 188.
1. Main menu “Chrono”
2.Select “Int.” and confirm.
1. Main menu “Chrono”
2.Select “Stop” and confirm.
1. Main menu “Chrono” > “ Stop”
2.“Res.” and confirm.
1. Main menu “Chrono” > “ Stop”
2.Select “Reset” and confirm.
1. “G-Force” main menu
2.Confirm “G-Force max”.
3.“Reset” and confirm.
1. Main menu “Performance”
2.Select “Torque” and confirm.
14_991_Turbo_21.book Seite 116 Mittwoch, 9. April 2014 2:19 14
