2014 MITSUBISHI OUTLANDER SPORT service indicator

Horn switch6-54 Instruments and controls
6
E00508000640
Press the steering wheel on or around the“ ”mark.
zSince the demister requires a significantamount of power, stop the demister as soonas the window is demi
sted. Using it for a
long time may reduce the auxiliary batteryvoltage, making it impossible to start thePlug-in Hybrid EV System.zOn vehicles equipped with heated mirrors,when the rear window demister switch ispressed, the outside rear-view mirrors aredefogged or defrosted. Refer to “Heated mir-ror” on page 7-9.zOn vehicles equipped with the wiper deicer,when the rear window demister switch ispushed, the window glass becomes warmand the wipers become operable. Refer to“Wiper deicer switch” on page 6-53.NOTE
zIt is possible to cha
nge the setting to make
the rear window demister operate automati-cally when ambient
temperature becomes
low while the ready indicator lamp is illumi-nated, even if you do not push the rear win-dow demister switch.It operates automatica
lly only once after put-
ting the operation mode in ON.If you choose this setting, the heated mirrors(if so equipped) and
wiper deicer (if so
equipped) will also operate automatically atthe same time.For further informati
on, we recommend you
to consult a MITSUBISHI MOTORSAuthorised Service Point.On vehicles equipped
with Mitsubishi Multi-
Communication System (MMCS), screenoperations can be used to make the adjust-ment. Refer to the se
parate owner’s manual
for details.zThe demister switch is
not to melt snow but
to clear mist. Remove snow before use of thedemister switch.zWhen cleaning the inside of the rear window,use a soft cloth and
wipe lightly along the
heater wires, being careful not to damage thewires.zDo not allow objects to
touch the inside of
the rear window glass,
damaged or broken
wires may result.NOTE
Horn switch
BK0203201EN.book 54 ページ ２０１３年１１月１９日　火曜日　午前１１時５０分

Outside rear-view mirrors
Starting and driving 7-9
7
The mirrors automatically retract or extendwhen the doors are locked or unlocked usingthe remote control switches or the keylessoperation function of the keyless operationsystem.Refer to “Keyless operation system: To oper-ate using the key-less operation function,Keyless entry system” on pages 4-9.
E00601201582
To d e m i s t o r d e f r o s t t h e o u t s i d e r e a r - v i e wmirrors, press the rear window demisterswitch.The indicator lamp (A) will illuminate whilethe demister is on.The heater will be turned off automatically inabout 15 to 20 minutes depending on the out-side temperature.
CAUTIONzIt is possible to retract and extend the mirrorsby hand. After retracting a mirror using themirror retractor switch, however, you shouldextend it by using the switch again, not byhand. If you extended the mirror by handafter retracting it using the switch, it wouldnot properly lock in position. As a result, itcould move because of the wind or vibrationwhile you are driving, taking away your rear-ward visibility.NOTE
zBe careful not to get your hands trappedwhile a mirror is moving.zIf you move a mirror by hand or it movesafter hitting a person or object, you may notbe able to return it to its original positionusing the mirror retractor switch. If this hap-pens, push the mirror retractor switch toplace the mirror in its retracted position andthen push the switch again to return the mir-ror to its original position.zWhen freezing has occu
rred and mirrors fail
to operate as intended, please refrain fromrepeated pushing of the retractor switch asthis action can result in burn-out of the mir-ror motor circuits.
Retracting and extending the mir-rors without using the mirror retractor switch
NOTE
zFunctions can be modifi
ed as stated below.
Please consult a MITSUBISHI MOTORSAuthorised Service Point.On vehicles equipped
with Mitsubishi Multi-
Communication System (MMCS), screenoperations can be used to make the adjust-ment. Refer to the separate owner’s manualfor details.•Automatically extend when the operationmode is put in ON, and automaticallyretract when the driver’s door is openedafter the operation mode in put in OFF.•Automatically extend when the vehiclespeed reaches 30 km/h.•Deactivate the automatic extension func-tion.
Heated mirror
*
BK0203201EN.book 9 ページ ２０１３年１１月１９日　火曜日　午前１１時５０分

Power switch7-10 Starting and driving
7
E00631801079
In order to prevent theft, the Plug-in HybridEV System will not start unless a preregis-tered keyless operation key is used. (Immobi-lizer function)If you are carrying the keyless operation key,you can start the Plug-in Hybrid EV System.
The indicator lamp on the power switch turnsoff.The operation mode cannot be put in OFFunless the electrical parking switch ispressed.Electrical devices such as the audio andaccessory socket can be operated. Can beused when the Ready indicator is off.The indicator lamp on the power switch illu-minates orange.All vehicle’s electrical devices can be oper-ated.The indicator lamp on the power switch illu-minates blue. The indicator lamp turns offwhen the Plug-in Hybrid EV System is oper-ating.
NOTE
zThe heater mirrors can be turned on automat-ically.For further information, we recommend youto consult a MITSUBISHI MOTORSAuthorised Service Point. On vehiclesequipped with Mitsubishi Multi-Communi-cation System (MMCS), screen operationscan be used to make the adjustment. Refer tothe separate owner’s manual for details.
Power switch
CAUTIONzThe indicator lamp (A) will flash orangewhen there is a problem or malfunction inthe keyless operation system. Never drive ifthe indicator lamp on the power switch isflashing orange. Immedi
ately contact a MIT-
SUBISHI MOTORS Authorised ServicePoint.zIf the power switch operation is not smoothand feels like it is stic
king, do not operate the
switch. Immediately contact a MITSUBISHIMOTORS Authorised Service Point.NOTE
zWhen operating the power
switch, press the
switch all the way in. If the switch is notfully pressed, the Plug-
in Hybrid EV System
may not start or the operation mode may notchange. If the power
switch is pressed cor-
rectly, there is no n
eed to hold the power
switch down.zWhen the battery in the keyless operationsystem key has worn
out, and taking the key-
less operation key out of the vehicle, a warn-ing lamp will blink fo
r 5 seconds or warning
display will appear.
Operation mode of the power switch and its function OFFACCON
BK0203201EN.book 10 ページ ２０１３年１１月１９日　火曜日　午前１１時５０分

Starting and stopping the Plug-in Hybrid EV System7-12 Starting and driving
7
When the operation mode is in any modeother than OFF, if you close all the doors andthe tailgate then try to lock the doors and tail-gate by pressing the driver’s or front passen-ger’s dppr lock/unlock switch, or the tailgateLOCK switch, a warning display will appear,and the outer buzzer will sounds and you can-not lock the doors and tailgate.
E00632301042
If the driver’s door is opened with the Plug-inHybrid EV System stopped and the operationmode in any mode other than OFF, the opera-tion mode ON reminder inner buzzer soundsintermittently to remind you to put the opera-tion mode in OFF.
E00620601295E00620701443
1. Check that the EV charging cable is notconnected to your vehicle.2. Fasten the seat belt.3. Make sure the parking brake is applied.4. When you press the power switch whiledepressing the brake pedal with your rightfoot, the READY indicator in the meterblinks and the activation of Plug-inHyblid EV System starts.
5. When the READY indicator changesfrom blinking to staying on, the startup ofPlugin-Hyblid EV System is activated andthe vehicle is now ready to drive.
E00620801268
1. Stop your vehicle completely.
Operation mode ON reminder system
Starti ng and sto pping th e Plug-in Hybrid EV System Star ting the Plug- in Hybrid EV System
CAUTIONzWhen the Plug-in Hybrid EV System warn-ing lamp comes on while the READY indi-cator is on, avoid high-speed driving andhave your vehicle inspected by a MITSUBI-SHI MOTORS Authorised Service Point assoon as possible. (Refer
to “Plug-in Hybrid
EV System warning lamp” on page 6-39.)zNever attempt to start the engine by pushingor pulling the vehicle.
CAUTIONzDo not press the power
switch while holding
the select lever at the operated position.NOTE
zContinue to depress th
e brake pedal until the
READY indicator in the meter stays on.zYo u c a n d r i v e y o u r v e h i c l e e v e n i f t h e e n g i n eis stopped.zPlug-in Hybrid EV System can be started inany operation mode.zIf the READY indicator does not come on,check the select position indicator. If theindicator is not indicating "P", press the elec-trical parking switch
to display "P" position.
zIf the READY indicator does not come on,turn the power switch to OFF once and, aftera while, press the power switch to start Plug-in Hybrid EV System.
St o pp i ng t h e P l u g - i n H y b r i d EV System
BK0203201EN.book 12 ページ ２０１３年１１月１９日　火曜日　午前１１時５０分

Electrical Parking switch7-16 Starting and driving
7
Refer to “When driving downhill” on page7-26.
E00636600020
When you park your vehicle, be sure to applythe parking brake and press the electricalparking switch to lock the wheels. The indi-cator on the switch illuminates in green andthe select position indicator displays “P” onthe information screen in the meter.
If the driver’s door is opened with the selectposition other than “P” when the vehicle is ata stop, the buzzer sounds to warn to press theelectrical parking switch.
WA R N I N GzSudden Regenerative brake may cause thetyres to skid.Select this position
according to the road
conditions and vehicle speed.
Electrical Parking switch
CAUTIONzIf you operate the electrical parking switchand the select lever repeatedly within a shorttime, the shifting from the “P” position or tothe “P” position is restrained for a certainperiod for the system protection. In such acase, wait for a while and then perform theoperation.zIf the parking lock mechanism is faulty, awarning is displayed on the informationscreen in the multi-information display.When this warning is displayed, park on aflat place with the parking brake securelyapplied. Have your ve
hicle inspected by a
MITSUBISHI MOTORS Authorized ServicePoint.
zIf you press the electrical parking switchbefore your vehicle stops completely, thevehicle makes a sudden stop, which maycause injury to passengers. This also can be acause of failure of the vehicle.zDo not place a object around the electricalparking switch. The electrical parking switchmay be pressed by the object when you placeit there or when you somehow touch it. Thiswill cause unintentional shifting to “P” or“N” position, which may lead to an accident.zBe careful not to spill beverages, etc. aroundthe electrical parking switch. The electricalparking switch may be stuck to the pressedposition when it is pressed.NOTE
zWhen the selector lever is shifted from the“P” position or to the “P” position, operatingnoise and vibration of the parking lock arefelt, but this is normal.
Electrical Parking switch reminder buzzer
CAUTION
BK0203201EN.book 16 ページ ２０１３年１１月１９日　火曜日　午前１１時５０分

Acoustic Vehicle Alerting System (AVAS)
Starting and driving 7-25
7
zWhen the vehicle speed is about 3 km/h to35 km/h and engine is not running.
The sound does not start in the followingcases. zWhen the vehicle speed is about 3 km/h orless and the brake pedal is depressed.zWhen the vehicle speed is about 35 km/hor more.zWhen the select position is “P” (PARK)position.zWhen the AVAS OFF indicator in themeter is illuminating.zWhen the engine is running.
When the operation mode is set to “ON”, theAVA S O F F i n d i c a t o r c o m e s o n a n d g o e s o u tin a few seconds.
E00631701052
If the operation mode is put in ON, the AVASis automatically turned on.The AVAS should be turned on while normaldriving.When driving on the freeway etc., it is possi-ble to turn off by pressing the AVAS OFFswitch.
If pressing the AVAS OFF switch, the audiblealarm not sound and indicator lamp illumi-nates.If pressing the AVAS OFF switch once again,the AVAS is activated and the indicator lampgoes off.
WA R N I N GzEven if the Acoustic Vehicle Alerting Sys-tem (AVAS) sounds, pay special attentionto pedestrians.Pedestrians may not notice the oncomingvehicle, which may cause an accidentresulting in serious
personal
injury or
death.CAUTIONzAlways confirm the indicator lamp goes offbefore driving. If the indicator lamp blinks, the operationmode is put in OFF, and the operation modeis put in OFF once again. It is not abnormallyif the indicator lamp goes off. If the indicatorlamp blinks again, have the vehicle inspectedat a MITSUBISHI MOTORS AuthorisedService Point as
soon as possible.
AVA S O F F s w i t c h
WA R N I N GzNever turn the Acoustic Vehicle AlertingSystem (AVAS) off if there is a possibilitywhere the pedestrian exists.NOTE
zIf the operation mode is put in OFF, whilethe AVAS has been turned off, and the opera-tion mode is put in ON once again, the AVASis activated.
BK0203201EN.book 25 ページ ２０１３年１１月１９日　火曜日　午前１１時５０分

Brake assist system7-28 Starting and driving
7
E00628201369
If an abnormal condition occurs in the sys-tem, the following Warning lamp/Warningdisplay will turn on.Wa r n i n g l a m p
Warning display
E00627001546
The brake assist system
is a device assisting
drivers who cannot depress the brake pedalfirmly such as in emergency stop situationsand provides greater braking force.If the brake pedal is depressed suddenly, thebrakes will be applied with more force thanusual.
NOTE
zThe hill start assist is activated when all ofthe following conditions are met.•The Plug-in Hybrid EV System is operat-ing.(The hill start assist will not be activatedwhile the Plug-in Hybrid EV System isstarting or immediately after the Plug-inHybrid EV System is started.)• The select position is in any position otherthan “P” or “N”.•The vehicle is completely stationary, withthe brake pedal depressed.• The parking brake is released.zThe hill start assist will not operate if theaccelerator pedal is depressed before thebrake pedal is released.zThe hill start assist also operates whenreversing on an uphill slope.
Warn in g di s p lay
CAUTIONzIf the warning is displayed, the hill startassist will not operate. Start off carefully.zPark your vehicle in a safe place and stop thePlug-in Hybrid EV System.Restart the Plug-in Hybrid EV System andcheck whether the disp
lay/indicator goes out,
in which case the hill start assist is againworking normally.If they remain displayed or reappear fre-quently, it is not necessa
ry to stop the vehicle
immediately, but the vehicle should beinspected by a MITSUBISHI MOTORSAuthorised Service Poin
t as soon as possible.
Brake assist system
CAUTIONzThe brake assist system is not a devicedesigned to exercise braking force greaterthan its capacity. Make sure to always keep asufficient distance be
tween vehicles in front
of you without relying too much on the brakeassist system.NOTE
zOnce the brake assist system is operational,it maintains great braking force even if thebrake pedal is lightly released.To s t o p i t s o p e r a t i o n , c o m p l e t e l y r e m o v eyour foot from the brake pedal.zWhen the brake assist system is in use whiledriving, you may feel as if the depressedbrake pedal is soft, the pedal moves in smallmotions in conjunction
with the operation
noise, or the vehicle body and the steeringwheel vibrate. This occurs when the brakeassist system is ope
rating normally and does
not indicate faulty operation. Continue todepress the brake pedal.zYo u m a y h e a r a n o p e r a t i o n n o i s e w h e n t h ebrake pedal is depressed suddenly while sta-tionary. This does not indicate a malfunctionand the brake assist system is operating nor-mally.zWhen the anti-lock brake system warninglamp or only active stability control warninglamp illuminate, the brake assist system innot functioning.
BK0203201EN.book 28 ページ ２０１３年１１月１９日　火曜日　午前１１時５０分

Cruise control*7-38 Starting and driving
7
E00609702434
The set speed driving can be deactivated asfollows:zPress the CRUISE CONTROL ON/OFFswitch (A) (Cruise control will be turnedoff.)zPress the CANCEL switch (D).zDepress the brake pedal.
The set speed driving is deactivated automati-cally in any of the following ways.zWhen your speed slows to about 15 km/hor more below the set speed because of ahill, etc.zWhen your speed slows to about 40 km/hor less.zWhen the active stability control (ASC)starts operating.Refer to “Active stability control (ASC)”on page 7-32.
E00609801731
If the set speed driving is deactivated by thecondition described in “To deactivate” onpage 7-38, you can resume the previously setspeed by push up the RES + switch (C) whiledriving at a speed of about 40 km/h or higher.The “SET” indicator appears on the informa-tion display in the meter cluster.Under either of the following conditions,however, using the switch does not allow youto resume the previously set speed. In thesesituations, repeat the speed setting procedure:zThe CRUISE CONTROL ON/OFFswitch is pressed.zThe operation mode is put in OFF.zIndicator display go off.
To d e a c t i v a t e

WA R N I N GzAlthough the set sp
eed driving will be
deactivated when shifting to the “N”(NEUTRAL) position, never move theselector lever to the “N” (NEUTRAL)position while driving.Yo u w o u l d h a v e n o
regenerative brake
and could cause a serious accident.CAUTIONzWhen the set speed driving is deactivatedautomatically in any situation other thanthose listed above, there may be a systemmalfunction.Press the CRUISE CONTROL ON/OFFswitch to turn off the cruise control and haveyour vehicle inspected by a MITSUBISHIMOTORS Authorised Service Point.
To r e s u m e t h e s e t s p e e d

BK0203201EN.book 38 ページ ２０１３年１１月１９日　火曜日　午前１１時５０分