Power switch7-10 Starting and driving
7
E00631801079
In order to prevent theft, the Plug-in HybridEV System will not start unless a preregis-tered keyless operation key is used. (Immobi-lizer function)If you are carrying the keyless operation key,you can start the Plug-in Hybrid EV System.
The indicator lamp on the power switch turnsoff.The operation mode cannot be put in OFFunless the electrical parking switch ispressed.Electrical devices such as the audio andaccessory socket can be operated. Can beused when the Ready indicator is off.The indicator lamp on the power switch illu-minates orange.All vehicle’s electrical devices can be oper-ated.The indicator lamp on the power switch illu-minates blue. The indicator lamp turns offwhen the Plug-in Hybrid EV System is oper-ating.
NOTE
zThe heater mirrors can be turned on automat-ically.For further information, we recommend youto consult a MITSUBISHI MOTORSAuthorised Service Point. On vehiclesequipped with Mitsubishi Multi-Communi-cation System (MMCS), screen operationscan be used to make the adjustment. Refer tothe separate owner’s manual for details.
Power switch
CAUTION zThe indicator lamp (A) will flash orangewhen there is a problem or malfunction inthe keyless operation system. Never drive ifthe indicator lamp on the power switch isflashing orange. Immedi
ately contact a MIT-
SUBISHI MOTORS Authorised ServicePoint. zIf the power switch operation is not smoothand feels like it is stic
king, do not operate the
switch. Immediately contact a MITSUBISHIMOTORS Authorised Service Point.NOTE
zWhen operating the power
switch, press the
switch all the way in. If the switch is notfully pressed, the Plug-
in Hybrid EV System
may not start or the operation mode may notchange. If the power
switch is pressed cor-
rectly, there is no n
eed to hold the power
switch down. zWhen the battery in the keyless operationsystem key has worn
out, and taking the key-
less operation key out of the vehicle, a warn-ing lamp will blink fo
r 5 seconds or warning
display will appear.
Operation mode of the power switch and its function OFFACCON
BK0203201EN.book 10 ページ ２０１３年１１月１９日 火曜日 午前１１時５０分
Power switch
Starting and driving 7-11
7
E00631901041
If you press the power switch withoutdepressing the brake pedal, you can changethe operation mode in the order of OFF, ACC,ON, OFF.
E00632801034
After about 30 minutes has elapsed with theoperation mode in ACC, the function auto-
matically cuts out the power for the audiosystem and other electric devices that can beoperated with that position.When the power switch operate again, thepower is supplied again.
E00632201041
NOTE
zYo u r v e h i c l e i s e q u i p p e
d with an electronic
immobilizer.To s t a r t t h e P l u g - i n H y b r i d E V S y s t e m , t h eID code which the transponder inside the keysends must match the one registered in theimmobilizer computer. Refer to “Electronicimmobilizer (Anti-theft starting system)” onpage 4-3.
Changing the operation mode
CAUTION zWhen the Plug-in Hybrid EV System is notoperating, put the operation mode in OFF.Leaving the operation mode in ON or ACCfor a long time when the Plug-in Hybrid EVSystem is not operating may cause the auxil-iary battery to be discharged, making itimpossible to start the Plug-in Hybrid EVSystem. zWhen the auxiliary battery is disconnected,the current operation mode is memorized.After reconnecting the auxiliary battery, thememorized mode is selected automatically.Before disconnecting the auxiliary batteryfor repair or replacement, make sure to putthe operation mode in OFF. Be careful if you are not sure which opera-tion mode the vehicle is in when the auxil-iary battery is run down. zThe operation mode ca
nnot be changed from
OFF to ACC or ON if the keyless operationkey is not detected to be in the vehicle. Referto “Keyless operation system: operatingrange for starting the Plug-in Hybrid EVSystem and changing
the operation mode”
on page 4-8.
ACC power auto-cutout func-tion
NOTE
zIt is possible to modify functions as follows:•The time until the power cuts out can bechanged to about 60 minutes.•The ACC power auto-cutout function canbe deactivated.For details, we recommend you to consult aMITSUBISHI MOTORS Authorised Ser-vice Point.On vehicles equipp
ed with Mitsubishi
Multi-Communication System (MMCS),screen operations can be used to make theadjustment.Refer to the separate
owner’s manual for
details.
Operation mode OFF reminder system
BK0203201EN.book 11 ページ ２０１３年１１月１９日 火曜日 午前１１時５０分
