2014 MITSUBISHI ASX valve

Tyre inflation pressures
E01001402902ItemTyre sizeFrontRearAt trailer towingFrontRear
Normal tyre215/65R16 98H2.4 bar (35 psi) [240 kPa],
2.6 bar (38 psi) [260 kPa]*2.4 bar (35 psi) [240 kPa],
2.6 bar (38 psi) [260 kPa]*215/60R17 96H2.2 bar (32 psi) [220 kPa]2.2 bar (32 psi) [220 kPa]Temporary spare
tyreT125/90D16
T155/90D164.2 bar (60 psi) [420 kPa]—215/65R162.4 bar (35 psi) [240 kPa]—
*: 2200 models only
Check the tyre inflation pressure of all the tyres while they are cold; if insufficient or excessive, adjust to the specified value.
After the tyre inflation pressure has been adjusted, check the tyres for damage and air leaks. Be sure to put caps on the valves.

Wheel condition
E01001800885
1- Location of the tread wear indicator
2- Tread wear indicator
Check the tyres for cuts, cracks and other
damage. Replace the tyres if there are deep
cuts or cracks. Also check each tyre for pieces of metal or pebbles.
The use of worn tyres can be very dangerous
because of the greater chance of skidding or
hydroplaning. The tread depth of the tyres
must exceed 1.6 mm in order for the tyres to meet the minimum requirement for use.
Tread wear indicators will appear on the sur-
face of the tyre as the tyre wears, thereby in-
dicating that the tyre no longer meets the
minimum requirement for use. When these
wear indicators appear, the tyres must be re-
placed with new ones.On 4-wheel drive vehicles, when replacement
of any of the tyres is necessary, replace all of
them.
Tyres
10-13
OGAE14E1Maintenance10