2014 MAZDA MODEL 6 Smart Start Guide (in English)

24
Smart City Brake Support
Laser Sensor
SCBS system can
be turned off using
DSC Off button.
SMART CITY BRAKE SUPPORT (SC BS) SY STEM
(if equipped)
The Smart City Brake Support (SCBS) system is designed to reduce
damage in the event of a collision by operating the brake control (SCBS)
when the system’s laser sensor detects a vehicle ahead:
• When your vehicle speed is 2 to 18 mph (4 to 30 km/h).
• The system determines that a collision with a vehicle ahead is unavoidable.
•
It may be possible to avoid a collision if the relative speed between
your vehicle and the vehicle ahead is less than 9.3 mph (15 km/h).
•
When the driver depresses the brake pedal while the system is in
the operation range at about 2 to 18 mph (4 to 30 km/h), the brakes
are applied firmly and quickly to assist. (SCBS Automatic Brake is
displayed in the Multi-information Display)
• SCBS automatic brake is released approximately 2 seconds after the
vehicle comes to a stop.
Refer to your Owner’s Manual for complete details.

25
Blind Spot Monitoring System
BLIND SPOT MONI TORING (B SM) (if equipped)
The Blind Spot Monitoring (BSM) system is designed to assist the driver
by monitoring blind spots on both sides of the vehicle to the rear in
certain situations such as when changing lanes on roads and freeways or
reversing the vehicle from a parking garage.
The Blind Spot Monitoring (BSM) System consists of the Blind Spot Monitoring
(BSM) and Rear Cross Traffic Alert (RCTA).
Turning BSM System Off
Turning the BSM system off will turn off both the light and sound
indicators. To manually turn the BSM system off, push the BSM
OFF switch on the dash. The BSM OFF indicator will illuminate
in the instrument cluster when the BSM system is off. The BSM
system will automatically turn on the next time the vehicle is started.
• If your vehicle speed is 6.7 mph (10.8 km/h) or more, the BSM will warn
you of vehicles in the detection area by illuminating the BSM warning
lights located on the left and right door mirrors.
•
If you operate a turn signal in the direction of an illuminated BSM warning
light, the system will also warn you with a beep and warning light fash.
•
BSM sensors are located under the left and right rear bumper areas. The
BSM system may not operate properly if the rear bumper gets too dirty,
so keep the rear bumper area clean.
Your Vehicle
Detection Areas
Please refer to
your Owner’s
Manual for
complete details.
NOTE: Do not rely completely on the BSM system and be sure to look
over your shoulder before changing lanes:
• The BSM ca n as sist the dr iver in co nfirming the sa fety of th e surroundings, but
is no t a complete substitute.
• The driver is re sponsible for en suring safe lane changes and ot her ma neuvers.
• Alw ays pay at tention to th e direction in wh ich the ve hicle is traveling and th e
vehicle’s surroundings.
• The BSM do es no t op erate when th e ve hicle speed is lo wer than ab out 6.7 mph
(10 .8 km/h).

26
REAR CROSS TRAFFIC ALERT (RCTA) (if equipped)
The Rear Cross Trafc Alert (RCTA) is designed to alert the driver of
oncoming trafc when backing out of a parking spot. RCTA is active:
• When your vehicle is in reverse.
If your vehicle speed is 0 to 7.8 mph (0 to 12.6 km/h).

When BSM sensors detect an object moving more then 2.8 to
18.6 mph (4.5 to 29.9 km/h) (vehicle/motorcycle).
RCTA will notify the driver with indicators and sound:
• Rear View Monitor and outside mirror flashing indications.
• Beep sound same as BSM.
Pl ease refer to your Owner’s Manual for complete details.
Object Detected Object
Detected
Rear View Monitor www.MazdaUSA.com

27
Manual Climate Control
Temperature
Control Dial

Rotate the dial for
temperature contr ol.
NOTE:
When set
to MA X A /C with
dashboard vents
or dashboard and
foor vents, the A /C
will turn on, and
recirculated air will
be selected for
maximum cooling.
Fan Control Dial
Rotate the dial to set desired
fan speed.
Push to recirculate
cabin air to reduce
outside odors and
improve cooling.
Push for fresh
air cir culation.
Push to manually turn air
conditioning on or of f.
Push to defrost the
r ear window.Mode Selector D ial
Rotate the dial to
select airfow mode.
Dashboard
vents
Dashboard
and foor vents
Floor vents
Defroster and
foor vents
Windshield
defroster
B est Cooling Settings
Ind icator ON (automatically)
NOTE:
•
When selecting either defroster mode ( or ), the air conditioner and fresh
air mode are automatically turned on by the system. This helps defrost the
windows more effciently by dehumidifying the air. Manually set the fan control
and temperature control dials as desired.
•
In either defroster mode (
or ), air will blow from the side dashboard vents.
To defrost the side windows faster, point the vents toward the side windows.
B est Heating Settings

28
Automatic Climate Control
Driver Temperature
Con trol Dial
AUT O ON: Push dial
to turn Automatic Air
Conditioning system
on (indicator light on).
Rotate dial to select your
desired set temperature
(shown above). The
airfow mode and the
amount of airfow will be
automatically controlled
in accordance with the
set temperature.
Push to defrost
the windshield.
Push to defrost
the rear window.
Push to
manually turn
air conditioning
on or off.Passenger
Temperature
Control Dial
Push to turn DUAL
mode ON/OFF.
• With DUAL mode
ON (indicator on),
rotate the dial to
set passenger
side temperature
separate from
the driver’s side
(shown above).
• With DUAL mode
OFF (indicator off),
driver controls the
temperature setting
on both sides.
Push to select the
following airfow mode:
NOTE: Automatic climate
control will allow you to
maintain individual preset
cabin temperatures for the
driver and passenger when
DUAL mode is selected.
Push to recirculate
cabin air to reduce
outside odors and
improve cooling.
Push for fresh
air circulation.
Dashboard vents
Dashboard
and foor vents
Floor vents
Defroster and
foor vents
NOTE: Automatic
temperature control
always works even
if the AUTO indicator
turns off by changing
the fan speed or the
airfow mode.
Fan Control Dial
• Rotate the dial to
select the desired
fan speed.
• Push OFF to turn
climate control
system of f.

29
CD SlotAUDIO CONTROLS
Audio Controls (without 5.8” LCD screen)
POWER O N
Pus h the Volume/Power dial to turn
the audio system on.
MEDIA SELE CTION
FM /A M: Push FM/AM button to
select the FM1, FM2, or AM band.
The selected band will be indicated
in the display.
CD: Pus h CD button to select the
CD player when inserting a CD.
US B/AUX : Pu sh US B /AU X bu tton to
sel ect th e US B or iP od player wh en
connecting US B or iP od.
AUX: Pu sh US B /AU X bu tton to
swi tch to AUX jack input.
T UNING
The r adio has the following
tuning controls:
M anual: Turn the TUNE dial to
manually change the frequency. S
eek: Push the SEEK
tuning buttons to automatically
seek a higher or lower frequency
with a station.
S can: Push the SCAN button
to automatically sample strong
stations for seconds each. Push
again to cancel.
Preset Channel: P u s h 1/2 /3 /4 /5 /6
button to select a station stored in
memory. To store a station, push
and hold 1/2/3/4/5/6 until station
is displayed.
Auto Memor y Tuning: Push and
hold the AUTO-M button to store
an additional 6 stations on each FM
and AM band without disturbing the
previously stored stations. To return
to the previously stored stations,
push FM or AM button. Refer to the
Owner’s Manual for complete details.

30
www.MazdaUSA.com
Eject CD
FOL DER SEARCH
(d uring MP3/WMA/AAC
CD or U SB playback)
•
To change to th e
previous folder, push the
folder down button
,
or push the folder up
button
to advance to
the next folder.
T E X T: For fles with a fle name
and other information that have
been input. The display switches
between display of the fle name
and other information each time
the text button (TEXT) is pushed
during playback.
L OA DING A CD
•
Insert the CD in to th e sl ot,
labe l-side up. The auto
loading mechanism will load
the CD and begin to play it.

iPO D P L AY E R
•
Select CATEGORY: Push
pre-set button 5 (down) or
6 (up) to select Playlist/Artist/
Album/Song/Podcast/Genre/
Composer/Audiobook.
•
Sel ect a desired list: Push
FOLDER Up/Down to select a
desired list from the list menu.
•
Tr a c k Up/ Down : To change
to the previous track, push
SEEK
or turn the FILE dial
to the left. To change to the
next track, push SEEK
or
turn the FILE dial to the right.
S ETTING YOU R CLO CK
• Push the H bu tton to set the hour.
• Push the M button to set the minutes.
Push the :00 button to reset clock to nearest hour.

31
Eject CD
POWER ONPush the Power/Volume dial to turn the
audio system on
MEDIA SELE CTIONPush the AUDIO button to select the
appropriate on-screen button:
Radio: Select FM1, FM2, or AM band.
CD: Select for CD player.
B luet ooth
®: Select for BT® Audio.
Pandora: Select to play Pandora from
BT
® device (with Pandora app).
US B: Se lect to play iPod/iPhone®/
USB memory through USB port.
AUX: Select to switch to AUX input.
SIRIUS: Select for SiriusXM Satellite
Radio
®. If your vehicle is equipped with
SiriusXM Satellite Radio®, your new
Mazda includes a free introductory
subscription with a limited term trial
offer. Call 888-539-7474 to activate.
See the Owner’s Manual and/or dealer
f o
r details or contact dealer about
adding SiriusXM Satellite Radio
®.
See your Owner’s Manual for further
information on:
• Pandora au dio ap plication
• Audio me nu voi ce-command T
UNING
M anual : Turn the TUNE/FILE dial to
manually change the frequency.
S eek: Push the SEEK
button
or touch and hold the
on-screen button, to automatically
seek a higher or lower frequency or
track, depending on media selected.
NOT E:
If you continue to push and hold
the button, the frequency will continue
changing without stopping.
S can: Touch the SCAN on-screen
button to automatically sample strong
stations for seconds each. Touch again
to cancel.
Auto Memor y Tuning:
1 To u ch the
Auto Memory on-screen
button. The auto memory preset
list is displayed and the previously
tuned frequency is received.
2 To u ch the
Update List on-screen
button to display the frequencies of
up to ten radio stations on the auto
memory preset list.
3 To u ch the desired frequency.
Refer to the Owner’s Manual for
complete details.
Audio Controls (with 5.8” LCD screen)
P L AY I N G BLUETOOTH® (B T ) AU DIO
1 Make sure BT au dio de vice is pa ired to
your vehicle.
2 Tu r n on BT au dio de vice.
3 To u ch th e Bl uetooth
® on-screen tab.
4 Sel ect th e de sired BT feature on -screen.
GRACENOTE
The Gracenote media database is used to improve
voice recognition of artist and album names with the
Mazda Hands Free system. To make best use of the
voice recognition, install the most recent database.
1 Loa d the Gracenote update on a memory stick
from www.MazdaUSA.com/USB. In sert th e
mem ory st ick in to th e US B por t.
2 Push the PHONE button.
3 Sel ect Setup and scroll down to Gracenote Update.