5
Folding Rear Seatbacks Down
Returning rear seats to
upright position
1 Raise seatbacks until they lock into position.
2 Pul l on the top of the seatbacks from inside
the vehicle to make sure they are locked.
3 Che ck that all seat belts are routed properly for passenger use.
MEMORY SE AT SWI TCH (if eq uipped)
Seats
To Program the Driv er’s Seat Memory Position
1 Turn the ignition switch off.
2 Adjust seat to desired position using the slide/tilt and recline switches.
3 Push and hold the memory seat SET button until a beep is heard.
4 Within 5 seconds:
• To p rogram a memory seat button, push and hold memory button
1 or 2 until a beep sound is heard.
• To program a key, push and hold the key unlock button until a beep
sound is heard (two registered keys can be programmed).
NOTE: Left rear seat release is shown .
Using remote handle:
1 Che ck that rear seats are clear
of objects.
2 Ope n the trunk and pull the
left and/or right side remote
handle lever(s).
3 Ope n a rear door and fold the
rear seat forward.
