2014 Lexus GX460 Navigation Manual

72
GX_EMVN_OM60K84U_(U)13.07.02 11:50
1. BASIC OPERATION
1. QUICK REFERENCE
MAP SCREEN
To display this screen, press the “NAV” button.
No.NameFunctionPa g e
2D north up, 2D
heading up or 3D
heading up sym-
bolIndicates whether the map orientation is set to
north-up or heading-up. The letter(s) beside this
symbol indicate the vehi cle’s heading direction
(e.g. N for north). In 3D map, only a heading-up
view is available.
77
Options buttonSelect to displa y the “Navigation Options” screen.74
“GPS” mark
(Global Position-
ing System)Shows that the vehicle is receiving signals from
the GPS.149
GX_EMVN_OM60K84U_(U).book Page 72 Tuesday, July 2, 2013 11:51 AM

73
1. BASIC OPERATION
3
NAVIGATION SYSTEM
GX_EMVN_OM60K84U_(U)13.07.02 11:50
Traffic indicator
Shows that traffic information is received. Select
to start voice guidance for traffic information.
When traffic information is received via HD, HD
mark is displayed on the right.
90
Scale indicatorThis figure indicates the map scale.75
Zoom in/out but-
tonSelect to magnify or re duce the map scale. When
either button is selected, the map scale indicator
bar appears at the bottom of the screen.75
Footprint map
buttonSelect to display the footprint map screen.76
Current position
buttonSelect to display the cu rrent position address.
Voice guidance
buttonSelect to repeat voice guidance.122
Destination but-
tonSelect to display the “Destination” screen. 95
Speed limit iconIndicates the speed limit on the current road. The
display of the speed limit icon can be set to on/off.83
Route informa-
tion bar
Displays the current street name, or the distance
with the estimated travel time/arrival time to the
destination. The route information bar fills from
left to right as the vehicle progresses on the route.
116
Route informa-
tion buttonSelect to change the di splay between the current
street name and the dist ance with the estimated
travel/arrival time.
No.NameFunctionPa g e
GX_EMVN_OM60K84U_(U).book Page 73 Tuesday, July 2, 2013 11:51 AM

74
1. BASIC OPERATION
GX_EMVN_OM60K84U_(U)13.07.02 11:50
NAVIGATION OPTIONS SCREEN
The navigation options allow you to change map configurations, display/hide POI
icons, and edit the navigation routes. To display the “Navigation Options” screen,
press the “NAV” button, then select “Options” on the map screen.
No.FunctionPage
Select to display the de sired map configuration.78
Select to set display of the map in formation such as POI icons, route
trace, speed limit, etc.83
Select to display the map version and coverage area.152
Select to edit the set route.123
Select to pause or resume route guidance.114
Select to display the overview of the entire route.117
GX_EMVN_OM60K84U_(U).book Page 74 Tuesday, July 2, 2013 11:51 AM

75
1. BASIC OPERATION
GX_EMVN_OM60K84U_(U)13.07.02 11:50
3
NAVIGATION SYSTEM
2. MAP SCREEN OPERATION
1Press the “NAV” button.
2Check that the current position map is
displayed.
1Select or to change the
scale of the map screen.
zThe scale indicator bar appears at the bot-
tom of the screen.
z Select and hold or to continue
changing the scale of the map screen.
z The scale of the map screen can also be
changed by selecting the scale bar directly.
This function is not available while driving.
CURRENT POSITION DISPLAY
zTo correct the current position manually:
→P.1 4 5
INFORMATION
●
While driving, the current position mark
is fixed on the screen and the map moves.
●The current position is automatically set
as the vehicle receives signals from the
GPS (Global Positionin g System). If the
current position is not correct, it is auto-
matically corrected after the vehicle
receives signals from the GPS.
●After the battery disconnection, or on a
new vehicle, the current position may not
be correct. As soon as the system
receives signals from the GPS, the cor-
rect current position is displayed.
MAP SCALE
INFORMATION
●
The map scale is displayed above the
zoom in button at th e bottom left of the
screen.
●In areas where the footprint map is avail-
able the map scale changes from
to when at the minimum range.
GX_EMVN_OM60K84U_(U).book Page 75 Tuesday, July 2, 2013 11:51 AM

76
1. BASIC OPERATION
GX_EMVN_OM60K84U_(U)13.07.02 11:50
1Select on the map screen.
2Check that the footprint map is dis-
played.
zTo return to the normal map display, select
. z
To display the normal map, select .
FOOTPRINT MAP
For areas covered by the footprint map
(some major cities), a footprint map on a
scale of 75 ft. (25 m) can be selected.
When the map is scaled down to 150 ft.
(50 m), changes to and can
be selected to display the footprint map.
INFORMATION
●
If the map or the current position is
moved to the area which is not covered
by the footprint map, the screen scale
automatically changes to 150 ft. (50 m).
●On the footprint map, a one way street is
displayed by .
●Scrolling on the footprint map is not avail-
able while driving.
Building footprints in the database were
created and provided by NAVTEQ.
3D CITY MODEL MAP
A 3D city model map can be displayed
for some areas in major cities when the
map scale is 700 ft. (200 m) or less on
the 3D map screen.
INFORMATION
●
The 3D city model map can be set the
display on/off. ( →P.141)
GX_EMVN_OM60K84U_(U).book Page 76 Tuesday, July 2, 2013 11:51 AM

77
1. BASIC OPERATION
3
NAVIGATION SYSTEM
GX_EMVN_OM60K84U_(U)13.07.02 11:50
1Select an arrow to rotate.
1Select , or .
X North-up screen
X Heading-up screen
X 3D screen
ROTATING 3D MAP
3D map and 3D city model map can be
rotated when arrows appear around the
cursor while scrolling.
INFORMATION
●
The viewing angle of the 3D map can be
changed. ( →P.1 4 4 )
ORIENTATION OF THE MAP
The orientation of the map can be
changed between 2D north-up, 2D
heading-up and 3D heading-up by se-
lecting the orientation symbol displayed
at the top left of the screen.
GX_EMVN_OM60K84U_(U).book Page 77 Tuesday, July 2, 2013 11:51 AM

78
1. BASIC OPERATION
GX_EMVN_OM60K84U_(U)13.07.02 11:50
: North-up symbol
Regardless of the direction of vehicle travel,
north is always up.
: Heading-up symbol
The direction of vehicle travel is always up.
: 3D Heading-up symbol
The direction of vehicle travel is always up.
z The letter(s) beside this symbol indicate the
vehicle’s heading direction (e.g. N for
north).
1Select “Options” on the map screen.
2Select “Map Mode” .
3Select the desired configuration button.
SWITCHING THE MAP MODE
GX_EMVN_OM60K84U_(U).book Page 78 Tuesday, July 2, 2013 11:51 AM

79
1. BASIC OPERATION
3
NAVIGATION SYSTEM
GX_EMVN_OM60K84U_(U)13.07.02 11:50
zDepending on the conditions, certain
screen configuration buttons cannot be
selected.
■ MAP ONLY
■ DUAL MAP
zThe map on the left is the main map.
No.FunctionPage
Select to display the single
map screen. 79
Select to display the dual
map screen.79
Select to display the com-
pass mode screen.80
Select to display the turn list
screen.120
Select to display the freeway
exit list screen.118
Select to display the inter-
section guidance screen or
the guidance screen on the
freeway.
120
Select to display the turn-
by-turn arrow screen.121
GX_EMVN_OM60K84U_(U).book Page 79 Tuesday, July 2, 2013 11:51 AM