143
3
3-3. Adjusting the seats
Operation of each component
CT200h_OM_OM76135E_(EE)
Front seats
XManual seat
Seat position adjustment lever
Seatback angle adjustment lever
Vertical height adjustment lever (if
equipped for driver’s side)
XPo w e r s e a t
Seat position adjustment switch
Seat cushion (front) angle adjust-
ment switch (for driver’s side)
Vertical height adjustment switch
(for driver’s side)
Seatback angle adjustment switch
Lumbar support adjustment switch
(for driver’s side)
Adjustment procedure
1
2
3
1
2
3
4
5
CT200h_OM_OM76135E_(EE).book Page 143 Friday, May 30, 2014 1
1:14 AM
1483-3. Adjusting the seats
CT200h_OM_OM76135E_(EE)
■Recall procedureTurn the power switch to ON mode.
Check that the shift position is in P.
Press one of the buttons for the
driving position you want to recall
until the buzzer sounds.
■To stop the position recall operation part-way through
Perform any of the following:
●Press the “SET” button.
●Press button “1”, “2” or “3”.
●Operate any of the seat adjustment switches (only cancels seat position recall).
■Seat positions that can be memorized ( →P. 1 4 3 )
The adjusted positions other than the position adjusted by lumbar support switch can be
recorded.
■Operating the driving position memory after turning the power switch off
Recorded seat positions can be activated up to 180 seconds after the driver’s door is
opened and another 60 seconds after it is closed again.
■In order to correctly use the driving position memory function
If a seat position is already in the furthest possible position and the seat is operated in the
same direction, the recorded position may be slightly different when it is recalled.
1
2
3
CT200h_OM_OM76135E_(EE).book Page 148 Friday, May 30, 2014 1 1:14 AM
