2014 KIA SORENTO Navigation System Quick Reference Guide

Using the Navigation
Navigation l
3-15
POI Search is a feature that allows you to
search for POIs that are near your current
position, near a scroll mark, near the destina-
tion, or near the city center.
Categories are sub-categorized and the
selected area and category are displayed at
the top of the screen for user convenience.
Name Description
1 Near Current
PositionSearches POIs based on the
current vehicle position
2 Near Scroll Mark Searches POIs based on the
current map scroll position
3 Near
Destination Searches POIs nearby the
set destination (feature is dis-
abled when a destination has
not been set)
4 Near City
Center Searches POIs nearby a se-
lected area
i Information
• The searched location may not be the
exact location of a specific destination,
but displays a representative position of a
POI address.
• The ZAGAT Restaurant guide list is a rat-
ing system categorized into 0~9 Poor to
fair, 10~15 Fair to good , 16~19 Good to
very good , 20~25 Very good to excellent,

26~30 Extraordinary to perfection.
• Each category is sorted starting with high-
est ratings down to the lowest ratings.
Previous Destinations, Previous
Searches, and Previous Start Points
Press the DEST key ▶ Press
Previous Destination
.
Press the DEST
key ▶ Press
Previous Searches
.
1
2
3

3-16
Using the Navigation
Press the DEST key ▶ Press
Previous Start Point
.
These search features allow you to search
previous routes, previous searches and
start points.
Name Description
1 By DateSorts POIs and locations by
added date
2 By NameSorts POIs and locations by
name
3 Delete Items
From various entries, items
can be selected and deleted
all at once
i Information
• If the POI or region name is too long and
cannot be displayed within one screen,
pressing the

>
button will move the
name to the left to display the full name.
Address
Press the DEST key ▶ Press
Address
.
This search feature is used to search des-
tinations by addresses through state, city,
and street.
Enter the name of the Street, City and
State corresponding to the desired destina-
tion. Once search is complete, press the
Search button to select the desired loca-
tion from the list.
My Places
Press the DEST key ▶ Press
My Places
.
This search feature is used to search des-
tinations by selecting previously saved My
Places to set as destinations. My Places
can be placed in groups, and group names
can be edited within Setup.
1
2
3

Using the Navigation
Navigation l
3-17
Name Description
1 By Date Sort POIs and locations by date
2 By NameS o r t P O I s a n d l o c a t i o n s b y
name
3 By SymbolSort POIs and locations by sym-
bol
i Information
• If the POI or region name is too long and
cannot be displayed within one screen,
pressing the
> button will move the
name to the left.
• It is possible to save up to 100 My Places
per Group.
Intersection Search
Press the DEST key ▶ Press
Intersection Search .

This search feature is used to search des-
tinations by street intersections throughout
the map.
Enter the name of the Street, City and
State corresponding to the desired desti-
nation. Once search is complete, press the
Search button to select the desired loca-
tion from the list.
Map
Press the DEST key ▶ Press Map .
The map screen can be scrolled to display
other positions where you can set destinations.
Name Description
1 Set as
Destination Sets the POI or region where the
cursor is positioned as the new
destination
2 Add Waypoint Sets the POI or region where the
cursor is positioned as a waypoint
3 View
Destination Displays information for the set
destination
4 Cancel Route Cancels the currently set route
5 Call Calls the selected POI facility
6 DetailsDisplays details for the selected POI
facility with ZAGAT information
1
2
3
4
56

3-18
Using the Navigation
Emergency
Press the DEST key ▶ Press
Emergency .
This search feature is used to search for
police stations, hospitals, and dealerships
in emergency situations.
Name Description
1 Police
Station Displays list of Police Stations
closest to the current position
2 Hospital
Displays list of Hospitals clos-
est to the current position
3 Dealership
D i s p l a y s l i s t o f K I A M o t o r
Dealerships closest to the cur-
rent position
Coordinates
Press the DEST key
▶ Press
Coordinates .
This search feature is used to search desti-
nations by entering coordinates. Two coor-
dinate entry formats are supported. Select
the desired format upon starting search.
Phone Number
Press the DEST key ▶ Press
Phone Number .
This search feature is used to search the
locations of POIs by entering the phone
number of the desired POI destination.
• Area codes must be entered to complete
the search.
123

Using the Navigation
Navigation l
3-19
i Information
• The phone number and location may
differ for some POIs. In addition, the fol-
lowing types of facilities may be more
frequently located in other locations.
• Locations of department stores, muse-
ums, and amusement parks may some-
w h a t d i f f e r f r o m t h e s e t d e s t i n a t i o n .
Check the exact address when trying to
reach such destinations.
• Within general information newspapers,
there are cases when phone numbers of
concert halls actually list the numbers of
management companies. In such cases,
destination searches will be made to the
management companies.
• The telephone number and addresses
may change at any time.
Exit/Entrance
Press the DEST key ▶ Press
Exit.

This search feature is used to search
destinations by entering the Exits and
Entrances of corresponding expressways.
Enter the name of the Freeway corre-
sponding to the desired destination. Once
search is complete, press the
Search
button to select the desired location from
the list.
Setting a Destination
Press the DEST key ▶ Search for the
Destination ▶ Press
Set as Destination .

3-20
Using the Navigation
(Alternative Route)
(Route Overview)
• To conduct a destination search through
the desired search method, select the
desired destination from the list. (For
more information on destination search
m e t h o d s , r e f e r t o t h e ‘ D e s t i n a t i o n
Search’ section.)
• A f t e r v e r i f y i n g t h e l o c a t i o n o f t h e
s e a r c h e d d e s t i n a t i o n , p r e s s t h e
Set as Destination b u t t o n t o c a l c u -
late the route. The Route Overview or
Alternative Route screen will be the dis-
played.
• Press the Add Waypoint button to add
a waypoint destination.
• Within the Route Overview or Alternative
Route screen, press the
MAP
VOICE key
or the
Start Guidance button to start
route guidance.
i Information
• If you press the Set as Destination button
while a previous destination has already
been set, the pop-up ‘Replace destina-
tion?’ will be displayed.
• If you press Yes
, then the previous des-
tination is deleted and the new destination
will be set. Pressing the
Add Waypoint
button will add a waypoint destination.
One Touch Scroll Setting
The destination can be set to the current
map display.
• Within the map screen, touching a position
on the map will move the map to the center
of the selected position and display the
scroll mark.
• Press the Menu button to set the selected
position as a waypoint or destination.

Using the Navigation
Navigation l
3-21
Route Calculation
• Once you have set a destination, calculate
the route. The route overview and route
option menus will be displayed.
• After checking the Route Overview, press
the
MAP
VOICE key or the Start Guidance
button or just drive for over 3 mph or for
approximately 5 seconds to start guidance.
i Information
• To learn more about ‘Alternative Route’,
‘ R o u t e O v e r v i e w ’ , o r ‘ D e t a i l e d R o u t e
Settings’ refer to the ‘Route Menu’ section.
Demo
After a route has been calculated, press
the
Demo button to begin simulated
driving of the calculated route.
• Within the Route Overview screen, press
the
Demo button.
• During Demo, press the MAP
VOICE key
to end the demo and display the current
map position. If you start driving while
viewing the route demo, demo will end
and route guidance will start.
i Information
• Demo will not operate after starting route
guidance. To use the Demo feature, use
after route calculation but prior to starting
route guidance.
• During Demo the “Fast/Normal/Auto”
menus are displayed and it is possible to
adjust the demo speed.

3-22
Using the Navigation
Add Waypoint
After searching for waypoints, press the
Add Waypoint button to add the way-
point to the current route.
Route Recalculation
Once a route has been set, the Recalculate
button is displayed at the top of the menus.
Pressing the Recalculate button will dis-
play a pop-up that allows you to change route
options. Once the settings are changed,
the route is recalculated by reflecting the
changes.
i Information
• For more information on Faster Time,
Shorter Distance, and other route calcula-
tion options, refer to the route calculation
section.

Cancel Route
In the Map menu screen, press the
Cancel Route button.

i Information
• You can cancel the route by pressing
the
Cancel Route button that is dis-
played after pressing the
Menu button.