2014 KIA OPTIMA HYBRID Features and Functions Guide

7
ALWAYS CHECK THE OWNER’S MANUAL FOR COMPLETE OPERATING INFORMATION AND SAFET Y WARNINGS. *IF EQUIPPED
1
023 4 5 6rpm
x 1000
ODO
000456
miles
Active
ON
1
023 4 5 6rpm
x 1000
ODO
000456
miles
Active
ON
Active ECO System*
(ECODynamics)Active ECO helps to improve fuel
efficiency by controlling several
vehicle components. When
activated, it optimizes drivetrain
operations such as engine power
and transmission to help improve
fuel economy.
To turn ON, press the ECO button A. The button light will turn on and
the green ECO indicator light
B in
the instrument cluster will illuminate
(indicating that you are getting
optimal fuel efficiency).The Active
ECO System will remain on even
when the engine is turned off and
restarted.
To turn Active ECO OFF, press the
button
A again.


O
To help improve your fuel efficiency:


O

Drive at a moderate speed, accelerating smoothly and at a moderate rate


OKeep tires inflated to the recommended pressure


OBe sure the wheels are properly aligned
QUICK TIPS
For more information on the Active ECO System, refer to your Owner’s Manual or contact your local dealership.
SET
CANCEL OK
ECO
A
B

Active ECO System
Video
To view a video on your
mobile device, snap this
QR Code or visit the
listed website.
Refer to page 2 for more
information.
QR CODE
www.KuTechVideos.com/tf23/2014
(Eco button located on right
side of Steering Wheel)
INSTRUMENT CLUSTER

OPTIMA HYBRID
FEATURES & FUNCTIONS GUIDE
8
*IF EQUIPPED
INSTRUMENT CLUSTER
REMINDER: Appearance of Tripmeter display may differ as equipped.
REMINDER: All stored driving information (except Odometer and
Range) is reset if the battery is disconnected.Trip Computer / TripmeterThe Trip Computer is a driver
information system that
displays information related
to driving when the ENGINE
START/STOP button is in the
ON position.
To cycle through the LCD
modes, press the MENU/
MODE button
A.
When in the TRIP COMPUTER
mode, press the SELECT button
B to cycle through the screens.
When displaying TRIP A or
TRIP B screens, press and hold
the ENTER/RESET button
C to
reset the Tripmeter to zero.
LCD Controls and Modes* Press Mode button
A to scroll through different LCD modes.
Press Select button B to scroll through the menu items.
Press OK button
C to select the item.
CRUISECANCEL
RESSET
OK
A
(LCD Display Control buttons located on Steering Wheel)
B
C
Ty p e B
Trip Computer Mode:
Displays driving information for tripmeter, fuel
economy, etc. Hybrid Information Mode:
Displays the Eco Level and Hybrid Energy Flow status
Tu r n - by -Tu r n M o d e : Displays the state of the
Navigation System
Service Modes: Informs on upcoming service
intervals A/V Mode: Displays the state of the A/V System
User Settings Mode: Change settings of the doors,
lamps and other features
LCD modes:
.
Range
.
Average MPG
.
Instant MPG.
Trip A
.
Average MPH
.
Elapsed Time (E/T ).
Trip B
.
Average MPH
.
Elapsed Time (E/T )

9
ALWAYS CHECK THE OWNER’S MANUAL FOR COMPLETE OPERATING INFORMATION AND SAFET Y WARNINGS. *IF EQUIPPED INSTRUMENT CLUSTERTo enter Service
Mode, press the MENU
button
A, scroll to
the Service mode and
press SELECT button
B. Then press the OK
button
C . S y s t e m w i l l
display number of miles
remaining until next
service is due, and type
of service.
Service ModeTo reset the Service Mode system, press and hold
the OK button
C for more than 1 second. To turn
Service In OFF, go to User Settings. Service
To set up the maintenance schedule:


O.!//
O0$!
O

O100+*
O
A and
toggle to Service Interval


O
O.!//
O0$!
O
%
O100+*
O
C
to select the desired maintenance
schedule To enter the User Setting mode on the LCD* cluster, press the
MENU/MODE button
A when the vehicle is at a standstill and with
the ENGINE START/STOP button in the ON position or the engine
running.
You can navigate the selections on the
display by pressing the SELECT button
B,
and then selecting the item by pressing the
OK button
C.
Doors:
- Auto Door Lock*
- Auto Door Unlock*
- Two Press Unlock*
- Horn Feedback*
Lamps:
- One-Touch Turn Lamp*
- Headlamp Delay*
- Welcome Light*
User Settings Mode
P
Service in
0000
mi
00days
P
Service in
Off
P
Service IntervalBack
Off
On2500
mi.
36 month
P
User Settings
Door
Lamp
Convenient
Service
P
Service required
OK
CRUISECANCEL
RESSET
ACB
(located on Steering Wheel)
When service is required, the following screen
will be displayed: Service Required.Convenient:
- Language
- Temperature
- AVG Fuel Economy Reset
- Easy Seat Access*
- Steering Position*
Service:
- Service Interval On/Off
Driver Assist*:
- RCTA (Rear Cross Traffic Alert)

OPTIMA HYBRID
FEATURES & FUNCTIONS GUIDE
10
*IF EQUIPPED
Instrument Cluster - Energy FlowOptima Hybrid’s instrument cluster displays the following hybrid system modes to inform the driver of its status.HYBRID SYSTEM DISPLAYSEV Propulsion - The electric motor is
moving the vehicle.
Power Assist - Both the electric motor
AND the engine are moving the vehicle.Engine-Only Propulsion - The engine
is moving your vehicle.
Engine Generation - While the vehicle
is stopped, the engine is charging the
hybrid battery.

11
ALWAYS CHECK THE OWNER’S MANUAL FOR COMPLETE OPERATING INFORMATION AND SAFET Y WARNINGS. *IF EQUIPPED Instrument Cluster - Energy FlowOptima Hybrid’s instrument cluster displays the following hybrid system modes to
inform the driver of its status.

Optima Hybrid
Cluster Overview Video
To view a video on your
mobile device, snap this
QR Code or visit the
listed website.
Refer to page 2 for more
information.
QR CODE
www.KuTechVideos.com/tf23/2014
HYBRID SYSTEM DISPLAYSPower Reserve - While the engine
powers the vehicle, it is also recharging
the hybrid battery.
Vehicle Stop - The vehicle’s hybrid
system is standing by.Engine Brake/Regeneration -
The regenerative braking system is
recharging the hybrid battery.
Engine Generation/Regeneration -
The engine and the regenerative braking
system are both recharging the hybrid battery.

OPTIMA HYBRID
FEATURES & FUNCTIONS GUIDE
12
*IF EQUIPPED
Instrument Cluster - ECO LevelECO Level - The more economically you drive,
the more leaves/flowers appear. When the ECO
level reaches the top, the system registers a
point toward the saved ECO Score.
Range - Estimates how far you can go before
refueling is required.ECO Score - The Total ECO Score display indicates the
number of times the ECO Level has reached its maximum.
Average Fuel Consumption - Calculates average* fuel
consumption from the distance driven and amount of fuel
injected into the engine / total fuel used.Optima Hybrid’s instrument cluster displays the following hybrid system modes to inform the driver of its status.HYBRID SYSTEM DISPLAYS

13
ALWAYS CHECK THE OWNER’S MANUAL FOR COMPLETE OPERATING INFORMATION AND SAFET Y WARNINGS. *IF EQUIPPED Navigation System Display*When equipped, Optima Hybrid’s Navigation screen also provides information on
economical operation and hybrid system modes, including ECODynamics. To enter the
Hybrid display mode, press the Settings key on the audio control unit. Press the on-screen
INFO/UVO icon, then press HYBRID.
Energy Flow - Displays the current flow of
power between the Optima Hybrid’s main
powertrain components. It’s similar to
the Energy Flow Screen in the LCD in the
instrument cluster. Car Mode - The more economically you
drive, the more the ECO Level bars fill
up. As you continue to maintain high fuel
efficiency, leaves will appear and begin to
fly off the vehicle.
Average Fuel Economy - Displays the
average fuel economy over the duration
of a trip.
PM
ECO Level
50
40
30
20
10
MPG
NOW 30 min10 min 20 min
Average
Fuel Economy
13.4 MPGElectric
Gasoline
Average
Fuel Economy
PM

Optima Hybrid
Navigation System
ECODynamics Display
Video
To view a video on your
mobile device, snap this
QR Code or visit the
listed website.
Refer to page 2 for more
information.
QR CODE
www.KuTechVideos.com/tf23/2014
Earth Mode - The more economically you
drive, the more the ECO Level bars fill up,
and the earth becomes more blue. As you
continue to maintain high fuel efficiency,
the earth will start growing leaves.
PM
HYBRID SYSTEM DISPLAYS

OPTIMA HYBRID
FEATURES & FUNCTIONS GUIDE
14
*IF EQUIPPED
Hood Release Lever and Latch
B
Opening the Hood:
1 . Pull the Hood Release Lever
A to
unlatch the Hood
2 . In the front of the vehicle, lift
the Hood slightly, push the
secondary Latch
B to the left
inside of the Hood’s center and
lift the Hood
Closing the Hood:
Lower the Hood about halfway and then press down to
securely lock in place.Press the button
C to release the fuel door.
Pull the
button
D to open the trunk.
Fuel Door and Trunk Release Buttons
C
D
A
DRIVER’S PANEL
(Buttons located on Driver’s door panel)