2014 HONDA CR-Z Navigation Manual

24

Interface Settings
Color
System Setup
•Verbal Reminder : Turns the verbal reminders on or off.
On (factory default): Provides warning voice messages when:
– Driving with the parking brake on
– Driving without wearing the driv er and/or passenger seat belt
Off : Disables the feature.ColorHINFO button
 Setup
 Other
 Color
Choose the color of the navigation map and system menus. Select an item.
The following item s are available:
• Map : Sets the color of the map screen.
2Map Color
P. 25
• Menu : Sets the color of the menu screens.
2Menu Color
P. 25





25

Interface Settings
Color
System Setup
HINFO button
 Setup
 Other
 Color
 Map
Set separate map colors for Day and Night modes. Select a color for the map screen.
H INFO button
 Setup
 Other
 Color
 Menu
Set separate menu colors for Day and Night modes. Select a color for the menu screens.
■Map Color
1 Map Color
For Day mode
Set to White (factory default is Beige) to obtain
the best daytime display contrast.
For Night mode
Set to Black (factory default) to obtain the best
nighttime display contrast.
■ Menu Color
1 Menu Color
For Day mode
Set to Black (factory default is Blue) to obtain
the best daytime display contrast.
For Night mode
Set to Black (factory default is Blue) to obtain
the best nighttime display contrast.





26

Interface Settings
Color
System Setup
Set the screen brightness separately for Day and Night modes. Press the
a

(Display mode) button to cycle through the display modes (Day to Night to Off).
1. Press the a button.
The Brightness bar is displayed
for a few seconds.
2. Press the a button again.

Repeat the procedure to switch
the display modes.

Select b or n to adjust the
brightness.
■ Switching Display Mode Manually
1 Switching Display Mode Manually
A visual guide helps y ou see the difference
between Day an d Night modes.
2 Day or Night Mode P. 8
Recommended Settings•Select mid-range for the dash illumination.•Select White for the map Day display and
Black for the map Night display.





27

Interface Settings
Color
System Setup
Illumination control Priority Operationa
button
1
Selects Day, Night, or Off display mode. This button has
the highest priority and overrides all other display control
adjustments listed below.
Sunlight sensor
(see your
Owner’s Manual
for location) 2 If the sunlight sensor detects daylight and the headlights
are turned on, the system automatically overrides the
Night display and displays the Day display mode.
Remember : If desired, use the a button to override
this automatic choice.
Dash illumination
adjustment
buttons (see your
Owner’s Manual
for location)
3
When the headlights are turned on, and you wish to have
the Day display mode, adjust the illumination to full
brightness (beeps).
Remember : Adjust the dash brightness back to mid-range
to allow auto switching by sensing the headlights are on or
off.
Headlights
(Auto/On/Off) 4 When turned on, the display changes to Night display
mode. The previous three controls listed above can
“cancel” this function.
Remember : Use the a button, or adjust the dash
illumination to full brightness, to set the display to your
desired choice.
Screen color
choice
N/A
The user can select the color of the screen that will be
displayed for the Day and Night display modes described
above.
Remember : For best contrast, ensure that the map color is
white for Day and black for Night.





28

Interface Settings
Language
System Setup
LanguageHINFO button
 Setup
 Other
 Language
Set the system language used on all scr eens. You can choose from three languages:
English , Français (French), Español (Spanish).
Select the system language.
1Language
Voice confirmation of ci ties and streets only
occurs when English is the system language.
When Français or Español is selected, some
messages continue to be displayed in English.





29System Setup
Personal InformationHINFO button
 Setup
 Personal Information
Use the personal information menu to select and set your address books, home
addresses, and PINs. You can also delete unwanted destinations from the list of
previously routed destinations.
Select an item.
The following items are available:
• Address Book : Stores new addresses or edits your address book.
2Address Book
P. 30
• Home Address 1 : Sets or edits your home address.
2Home Addresses
P. 35
• Home Address 2 : Sets or edits another home address.
2Home Addresses
P. 35
• PIN Number : Sets or changes your PIN.
2PIN Numbers
P. 36
• User Name : Sets or changes your user name.
2User Name
P. 37
• Previous Destinations : Deletes the destination history.
2Previous Destinations
P. 38
1Personal Information
Personal information cannot be backed up or
moved to another navigation system.





30

Personal Information
Address Book
System Setup
Address BookHINFO button
 Setup
 Personal Information
 Address Book
Store up to 200 address entries in two address books (User 1 and User 2). You can
add, edit, and delete information in the address books. Select the user name to edit the user
address book.
Displays the address book.
Select the user name to change the
user address book.Select the category tab to display
only the address in the selected
category.
1Address Book
The number of addresses is shared by the two
address books. For example, if User 1 has 150
addresses, User 2 can only have 50.
If you have PIN-protec ted your address book,
enter your PIN when prompted. Select OK. PINs
are optional.
2 PIN Numbers P. 36
Any address book categories you create are also
displayed on the Select an Address screen.
2 Selecting an Address Book Category P. 33





31

Personal Information
Address Book
System Setup
HINFO button
 Setup
 Personal Information
 Address Book
This section explains how to enter the name and address. 1.Select New Address .
2. Select an item.
The following items are available:
• Edit Name : Edits the name of the entry.
• Edit Address : Edits the address of the entry.
• Edit Phone No. : Edits the phone number of the entry.
• Edit Category : Specifies the category of the entry.
• Delete : Deletes the entry.
■Adding an Address Book Entry
1 Adding an Address Book Entry
If you do not give the address a name, one is
automatically assigned (e.g., Address 001). You
can re-enter, edit, or make changes to any entry.
“Address” is the only required field.
Continued