2014 HONDA CR-Z Navigation Manual

56Navigation
Entering a DestinationHDEST button
This section describes how to enter a destination for route guidance. Select an item.
Select DEST Menu 2 to display
additional menu entries.
The following item s are available:
• Address : Sets a destination by entering an address.
2Address
P. 58
• Address Book : Sets a destination by selecting an address stored in your Address
Book.
2 Address Book
P. 63
• Previous Destinations : Sets a destination by selecting a previous destination.
2Previous Destinations
P. 64
1Entering a Destinationd
“Display Menu” ,
d
“Display Navigation”
If you press the DEST but ton when en route, the
Route Menu screen is displayed.
2 Changing Your Route P. 101
Prior to departure, you can set areas along your
route to avoid.
2 Avoiding Streets P. 102
Certain touchscreen functi ons are disabled while
the vehicle is moving.
2 Limitations for Manual Operation P. 18





57

Entering a Destination

Navigation
•Place Name : Sets a destination by entering a place name. 2Place Name
P. 65
• Place Category : Sets a destination by selecting a place/landmark.
2Place Category
P. 67
• Place Phone Number : Sets a destination by entering the phone number of a
place/landmark.
2 Place Phone Number
P. 72
• Coordinate: Sets a destination by entering latitude and longitude.
2 Coordinate
P. 73
• Intersection : Sets a destination (intersectio n) by entering two streets.
2Intersection
P. 74
• Map Input : Sets a destination by scrolling through the map.
2Map Input
P. 75
• Go Home 1 or 2 : Sets your home addres s as a destination.
2Going Home
P. 10





58

Entering a Destination
Address
Navigation
AddressHDEST button
 Address
Enter an address to use as th e destination. The state or pr ovince you are currently in
is displayed (e.g., California).
Select an item.
The following item s are available:
• City : Selects your destination city.
2Selecting a City
P. 60
• Street : Selects your destination street.
2Selecting a Street
P. 61
• Change State : Selects the state or province.
2Selecting the State or Province
P. 59





59

Entering a Destination
Address
Navigation
HDEST button
 Address
 Change State
1.Enter a state name.

Select List to display a list of
states.
2. Select a state from the list.
■Selecting the State or Province





60

Entering a Destination
Address
Navigation
HDEST button
 Address
 City
The name of the city where you are currently located is displayed. 1.Enter the name of a different city,
or select List for the current city.

Select List to display a list of
cities.
2. Select your destination city from
the list.

A list of matching hits is
automatically displayed after
you enter several letters, with
the closest match at the top of
the list.

Next, you are prompted to enter
a street name. 2 Selecting a Street
P. 61
■Selecting a City
1 Selecting a City by Name
Vehicle position may not be displayed when:•The automobile is traveling off-road.•The vehicle position data cannot be updated.
Using Voice Command (English only)
Say d “City ” on the Find address by screen, and
the following screen is displayed:
Say d “Current City” to select your current
location, or say the name of a different city.
2 Selecting a Street P. 61
If your city is not listed, it may be part of a larger
metropolitan area. Try entering the street first.
Non-detailed area mark: Try entering the
street first and then select the city.





61

Entering a Destination
Address
Navigation
HDEST button
 Address
 Street
1.Enter the name of your destination
street.

Do not enter the street type
(e.g., street, road, avenue) or
direction (e.g., north, south,
east, west).

Select List to display a list of
streets.
2. Select your destination street from
the list.

A list of matching hits is
automatically displayed after
you enter several letters, with
the closest match at the top of
the list.
■Selecting a Street
1 Selecting a Street
When entering the names of major freeways,
you can use the following abbreviations. For
interstates, use an “I ” (e.g., I-10). For U.S.
freeways, use “US” (e.g., US-18). For state
freeways, use the two-character state
designation (e.g., CA-101). For county roads, use
the appropriate desi gnation (e.g., G-2).
Using Voice Command (English only)
Say d “Street ” on the Find address by screen,
and the following screen is displayed:•Say the name of your destination street, and
say the street number as a string of individual
numbers.•Set the route to your destination.
2 Calculating the Route P. 77
Continued





62

Entering a Destination
Address
Navigation
3.Enter the street number. Select OK.
Only valid street numbers can be
entered.
4. Set the route to your destination.
2 Calculating the Route
P. 77
1Selecting a Street
If you did not select a city first and there is more
than one city with the specified street, a list of
cities is displayed.
Select the desired city from the list.





63

Entering a Destination
Address Book
Navigation
Address BookHDEST button
 Address Book
Select an address stored in your a ddress book to use as the destination.
1.Select your user name.
2. Select your destination from the
list.
3. Set the route to your destination.
2 Calculating the Route
P. 77

Select C or X to display only
the entries in a category: ALL,
BUSINESS, PERSONAL , or other
categories you have created. 2 Selecting an Address Book
Category
P. 33
1 Address Book
If you have PIN-protec ted your address book,
enter your PIN when prompted. Select OK. PINs
are optional.
2 PIN Numbers P. 36
You can select New Address on the Select an
address screen to add an entry to the address
book.
2 Adding an Address Book Entry P. 31
To switch the list between User 1 or User 2,
select the user name on the top right of the
screen.