4 Vehicle literature
In addition to this Owner's Manual, your Audi
comes with a Warranty
& Maintenance book
l et.
Moreover, depending on the model and the
eq uip ment, there may be additiona l instruc
tion booklets delivered with your vehicle (for
examp le, Operating Instr uctions for your
Sound System, Navigation System, etc .).
If you are missing one of these publications,
or if you believe that the information is not
comp lete, contact your authorized Audi dea ler
for assistance .
The Warranty & Maintenance booklet
explains how yo u can keep you r Audi in top
driving condition by having it serviced regu lar
ly and contains detai led information about
the warranties covering your Audi. Always
have the booklet with you when you take your
vehicle to an author ized Audi dealer for serv
ice . Your Audi Service Advisor will record each
scheduled service and can answer any ques
tions you may have regarding how to maintain
your ve hicle.
In Canada,
the vehicle literature is also availab le in
French . To obtain a copy, contact your dealer
or write to:
Au Canada, on peut se procurer un exemplaire
en fran~ais de ce document aupres du conces
sionna ire ou de:
Volkswagen Canada, Inc.
Client Assistance
Assistance a la Clientele
777 Bayly Street, West,
Ajax, Ontario LIS 7G7
If you sell your Audi
all literature should be left in the veh icle to
make the Warranty terms as well as all oper
ating, safety and ma intenance information
ava ilable to the next owner.
If you change your address or if you
bought this Audi used
be sure to send in a "Notice of Address
Change"/ "Notice of Used Car Purchase" post
card. Th is card can be found in the Warranty
&
Maintenance booklet or obtained from your
authorized Aud i dealer .
It is in your own interest that we are able to
contact you should the need arise .
14 Instrum ent s and w arn ing /indic ato r light s
braking. Lock-up of the rear wheel brakes
can cause loss of vehicle control and an
accident. Have your vehicle repaired im
med iately by your authorized Audi dealer
or a qualified workshop. Drive slowly and
avo id sudden, hard brake applicat ion .
- If the brake warning/indicator light does
not go out after a few seconds and the
parking brake is released, or lights up
wh ile you are driving, the fluid level in
the brake fluid rese rvoir is too low. If you
believe that it is safe to do so, proceed
immediately at low speed to the nearest
authorized Audi dealer or qualified work
shop and have the brake system inspect
ed.
- Always keep in m ind that afte r several
brake applicat ions, yo u will need greater
pressure on the brake peda l to stop your
vehicle. Do not re ly on stra ined brakes to
respond w ith maximum stopp ing power
in c ritical situations. You must a llow for
increased bra king distances. The extra
dis tance used up by fad ing br akes could
lead to an acc ident .
~/ !lr Safety systems
The I (USA models)/ . (Canada models) in
dicator light monitors the safety systems e.g .
airbags, pretensioners and i llum inates for a
few seconds each time you switch the ignition
on.
I f t he
I (USA models) • (Canada models)
indicator light does not go out, or if it illumi
nates wh ile you are dr iv ing, or if it starts to
bli nk, then there is a ma lfunction somewhere
in the system . If the light does not illuminate
when you sw itch on the ignit ion, this also
means there is a ma lfunction .
A WARNING
If you have a malfunction in the safety sys
t ems, cont act your author ized Audi dealer
immediate ly. Otherw ise the sa fety sys
tems may not wo rk p roperly in an acci
dent.
4 Safety belt warning light
Applies to vehicles: with safety belt warning light
The warning light is a reminder to fasten
safety belts .
The warning light . comes on for a few sec
onds after the ignition is sw itched on as a re
minder to fasten your safety belt .
Additional informat ion on safety belts
¢ page 103.
' 0 Generator '
This warning/indicator light detects a mal
function in the generator or in the vehicle 's
electrical system.
The . warning/indicator light illuminates
when you switch on the ignition and must go
out after the eng ine has started.
If the . warning/indicator light illuminates
whi le you a re d riving, you shou ld contact yo ur
authorized Aud i dea ler. Since the vehicle bat
tery is discharging, you shou ld sw itch off any
unnecessary electr ica l consumers (for exam
ple, the air conditioner).
"l!:r. Engine oil pressure
The red engine oil pressure warning symbol
requires immediate service or repair .
If the . symbo l appears in the disp lay and
flashes, the o il pressure is too low . In add ition
to the symbol, the following message also ap
pears in the display:
Switch off engine! Oil pres sure is too low
.,. Pull off the road and stop the veh icle.
.. Shut the engine down.
.. Check the engine oil level¢
page 178 .
.. Contact your authorized A udi dealer for as-
sistance if necessary.
Engine oil level too low
If the engine oil leve l is too low, top off oil to
t h e proper level~
page 180 . 1J11>
is switched back on by moving the wind
shield wiper lever to any position.
- Worn or dirty windshield wiper blades
cause smearing, which can affect the op
eration of the light/rain sensor*. Check
the condition of your windshield wiper
blades regularly.
- The rain sensor is part of the interval
wiping system. Turning off the ignition
will also deactivate the rain sensor. To re
activate the sensor, switch off the inter
val wiping function, then switch it back
on again.
- Applies to vehicles with light/rain sen
sor: When the wipers are switched on
manually and in rain conditions, the au
tomatic headlights* turn on
c;> page 46,
Lights or off during the day when the
wipers are no longer operating. The au
tomatic headlights* function is available
in this case only when the light switch is
in the "AUTO" position
c;> page 46,
fig. 52.
-Make sure the washer fluid reservoir in
the engine compartment is topped off
before going on a long trip. Look up
c;> page 188 for checking and filling the
washer container.
- The wipers only operate with the hood
completely closed.
Service position
It is only possible to change wiper blades if
you move the wiper arms to the service posi
tion.
In order to use the windshield wipers, the
front lid must be completely closed.
Moving wiper blades to the service
position
.,. When there is a risk of frost, make sure that
the wiper blades are not frozen to the wind
shield .
.,. Switch the ignition on .
.,. Move the wiper lever to position
0
c;>page 51, fig. 60 .
Clear vision 53
.,. Press the I RESET ! button until the Display
type
menu appears in the Driver Informa
tion System display.
.,. Using the rocker switch and the
I RESET ! but
ton, select the
Set > Wipers > Front> Serv
ice position on
function. The windshield
wiper arms move to the service position.
Moving wiper blades to park position
.,. Make certain that the wiper arms are lying
against the windshield.
.,. Switch the ignition on and move the wiper
lever from position
O to 4 c;> page 51,
fig . 60. The wiper arms will move back to
the park position.
(D Note
Never drive your vehicle when the wind
shield wiper arms are in the service posi
tion and pulled away from the windshield.
When you drive faster than 4 mph (6 km/
h), the wiper arms automatically return to
the park position and could cause paint
damage to the front lid!
(D Tips
-You can also turn on the service position,
for example, if you want to protect the
windshield from icing by using a cover.
- The service position moves to
off auto
matically when you operate the wind
shield wiper lever, or speed exceeds
4 mph (6 km/h).
Cleaning windshield wiper blades
Clean the windshield wiper blades when they
begin to leave streaks .
.,. Place the windshield wiper arms in the serv
ice position. Refer to
c;> page 53.
.,. Use a soft cloth and glass cleaner to clean
the windshield wiper blades.
A WARNING
Dirty windshield wiper blades can impair
your view. This can lead to accidents.
Warm and cold Climate controls
Controls
W arm and cold 63
The climate controls automatically maintain the selected temperature in the vehicle interior
throughout each season .
Fig. 71 Climate contro ls
We recommend the following sett ing :
• Rotate the knob
c::> fig. 71 @ to the right to
switch on the air conditioning .
• Set the temperature to 72 °F (22 °() .
• Press the
!AUTO I c::> fig . 71 button .
Using the previously recommended setting is
the quickest way to achieve a comfortable cli
mate in the vehicle . Th is setting should there
fore only be changed when persona l comfort
l eve ls o r certain circumstances requ ire it .
The climate controls are a combination of au
tomatic heating and ventilation systems and a
coo ling system which dehum idifies and coo ls
the air inside the vehicle .
The climate controls automatically maintain a temperature once it has been set. The tempe rat ure of the air from the v ents, fan speed
(air vo lume) and ai r distribu tion are also auto
mat ica lly adjusted . The system also takes into
account strong sunshine so that manua l ad
justment is not necessary . So in almost all
cases,
automatic mode offers the best cond i
tions for the comfort of the occupants at all
times of the year
c::> page 66 .
Plea se note:
In cooling mode, relative humidity in the inte
rior is reduced . This prevents the w indows
from fogg ing up .
When relative hum idity and temperatures
outside are high,
condensation can drip from
the a ir cond ition ing evaporato r and form a
poo l of water under the veh icle. This is normal
and not an ind ication of a leak!
When outside temperatures are low, the fan
does not switch to a higher speed until the coolant has reached an adequate tempera
tu re , with the exception of the defrost set
t ing.
When accelerating at wide-open throttle, the
air condit ioning compressor is temporar ily
switched off to maintain full engine power.
In order to ensure engine cooling under ex
treme engine loads, the compressor is switch
ed off if coolant temperatures cl imb too high .
Funct ions are set by turn ing the rotary knob
or switched o n and off by tapp ing the buttons.
1111-
64 Warm and cold
The LED in the buttons i lluminates when the
function is active .
Button(s) Meaning Pag e
Rotary knob Temperature ¢page 64
CD selection
Switch air con-
Rotary knob ditioning on/
¢page 64
@ ~ off
Fan
Rotary knob Air distribu-
® tion
¢page 65
~ Defrost
Ii] Rea r window
defogge r ¢page 67
I Heated seat
1-J + ! driver/passen-
I ger side *
¢page 67
~ Recirculation ¢page 66
1
, A/CI
Switch on
cooling sys-
¢page 66
I tern
Pollutant filter
The pollutant filter (particle filter) ensures
that contaminants in the outs ide a ir (such as
dust o r pol len) are greatly reduced o r stop
ped. The ai r is also fi ltered in recircu lation
mode.
The po llutant filter eleme nt must be changed
according to the intervals spec ified in the
maintena nce schedule so that the ai r cond i
tioning sys tem's pe rforma nce is not adve rsely
a ffec ted.
If the filter's effect iveness is weakened by
d riving the vehicle in a reas with heavily pollut
ed outside air, the fi lter elemen t shou ld al so
be changed be twee n the liste d se rvices.
_8 WARNING
For safety reasons, it is importan t th at all
w indows are free of ice, snow, an d conde n
sation. Only then is good visib ility ensured .
Please fam iliarize yourse lf wit h the correct
operation of the air conditioning and how
to de humid ify/defrost the windows.
(D Note
- If you suspect that the climate controls
have been damaged, switch the system
off to avoid damaging it, and have it in
spected by an authorized Audi dealer.
-Audi cl imate control system repairs re
quire special expertise and the proper
tools. You should contact an author ized
Audi dea ler in the event of malfunct ions.
(D Tips
- To avoid adversely affecting heat ing and
cooling performance and to prevent c on
densation on the w indows, t he air i ntake
in front of the wi ndshield must be free of
ice, s now, and leaves.
- Climate cont ro l wor ks mos t effectively if
the windows a re closed. Howeve r, if the
inter io r of a par ked veh icle is ext reme ly
ho t from the sun's r ays, briefly openi ng
t he win dows c an spee d up the cooling
process .
Setting temperature
.,. Tur n the rotary knob CD¢ page 63, fig. 71
to the desired temperature setting.
T o set a lowe r temperature, turn the rota ry
knob to the left. To set a higher temperature,
turn the rotary knob to the r ight. There are
additional intermediate settings available to
adjust the tempe rature as needed .
Switching climate control on/off
Switching the climate control system on /
off
.,. Tu rn the knob@¢ page 63, fig. 71 to the
r igh t to swi tc h climate cont ro l on. The LED
nex t to the wor d OFF goes o ut.
.,. Turn the kn ob @ ¢
page 63, fig. 71 to the
left to switch the climate contro l system off.
The LED next to the wo rd OFF comes on . ..,_
66 Warm and cold
Defrost~
The w indshi eld and sid e windo ws ore defrost
e d or clear ed o f cond ensation as quickly as
possibl e.
• To turn on t he defogger/defroster , press t he
~ button <=> page 63, fig . 71 .
• To turn the d efogger/d efroste r off, press the
~ button again, o r th e IA UT OI butto n.
Temperatu re is co ntrolled automatically . The
maximum a mou nt of air flows ma in ly fr om
ve nts 1 <=>
pag e 65.
A sma ll amount of ai r flows from vents 2 - if
they are open <=>
page 65.
Pressing the ~ button switches off recircu la
ti on mode.
Automatic operation ~
Standard operating mode at all times of the
year .
Turning on automatic operation
• Set t he te mp erature you w ant.
• Press the
!AUTO ! button <=> page 63, fig. 71 .
Automatic opera tion e nsur es constant tem
pe ra tur es in the i nterio r a nd dehum idifies the
a ir i nside t he vehi cle. Ai r tem perature, vo l
ume, and dist ribution are controlled a utomat
ica lly to reach o r maintain the desired interio r
temperature as q uic kly as possib le. Fluct ua
ti ons in exterior temperature and the effects
of temperatu re from the position of the sun
are compensated fo r automat ica lly.
Manual air recirculation mode~
The recirculation mod e prevents polluted out
side air from entering the vehicle interior.
Switching on air recir culation
• Press the button I;]<=> page 63, fig. 71,
<=>A .
Switching off air recirculation
• Pres s the button ~ again , o r
• Press the
!AU TO ! bu tton, or •
Press the~ button .
In recir culation mode, air is drawn from t he
vehicle interi or, filtered, and re circula ted . We
re commend that yo u se lec t rec irculat io n
mode
briefly <=>.&. under the fo llowing condi
t ions:
When driving thro ugh a tunne l or in a t raff ic
jam so that exha ust fumes and odors canno t
enter the vehicle inte rior.
A WARNING
You sho uld not use the recirculation m ode
for an extended period s ince no fresh air is
drawn in, and with the air co ndit ioning
switched off t he windows can fog up - t his
i nc reases the r is k of an accident!
A/C operation ~
Switching on A/C
• Press the IA/Cl button <=> page 63 , fig . 71 .
Switching A /C off
• Press the IA/Cl button again.
T he cooli ng sys tem is swi tched on d uring A/C
opera tion -the heat ing and ven tilat ion sys tem
is contro lled automatically.
@ Tips
If th e L ED in the sw itch stays o n aft er A/C
opera tion has been switched off( = sw itch
i ng the A/C off) , there is a fault i n an air
conditioning component. P lease cons ult
an a uthorized Audi dealer when there is an
operating problem.
Using the climate controls economically
E conomical use of the climate controls helps
to save fuel.
When climate control is wo rking in cooling
mode, engine pe rformance is reduced and
f uel consumpt ion is affected. To keep the time
the a ir cond ition ing is on as short as poss ible,
you should do the following: .,,_
~ If you would like to save fuel, switch the air
conditio ning off.
~ If you open the w indows wh ile driving,
switch the air conditioning off.
~ If the vehicle is extremely hot due to the
heat of the sun, briefly open doo rs and win
dows .
@ For the sake of the environment
When you save fuel, you reduce em iss ions
from the vehicle.
Rear window defogger
The rear window defogger clears the rear win
dow of cond ensation .
~ Press the~ button ¢ page 63, fig . 71 to
turn the rear window defogge r on and off.
The rear w indow defogger works only when
the engine is ru nning. The indicator light in
the button illuminates when the rear w indow
defogger is tu rned on .
The window between the cockpit and engine
compa rtment is also cleared with the rear
w indow .
The rear w indow defogger is switched
off au
tomatically after approx. 10 minutes.
@ For the sake of the environment
As soon as the rea r win dow is clear, yo u
should switch the rear window defogger
off . The reduced power cons umption has a
be neficial effect on fuel consumption.
Heated seats
App lies to vehicles: with heated seats
The seat cushion and the seatback of the
front seats can be heated electrically.
~ Press the heated seats b utton I-J + I
c:> page 63, fig. 71 to set the level of heati ng
desired.
The range of controls goes from 1 to 3. The
heat sett ing selected is shown by LEDs above
the button.
Warm and c old 67
A WARNING
Individuals wit h reduced sensitivity to pai n
or temperature cou ld deve lop bur ns when
us ing the seat heat ing funct ion. To red uce
the r is k of injury, these ind ividuals should
not use seat heating.
Q) Note
To avoid damage to the heat ing e lements
i n the seats, do not kneel o n the sea ts or
p lace heavy loads o n a small area of the
seat.
_& WARNING
You should only return to the saved speed if it is not too fast for the current traffic
conditions - risk of an accident!
Audi magnetic ride
Damping can be adjusted to the driver's pref
erence and it adapts automatically to the cur
rent driving situation.
SPORT •
Fig. 81 Center conso le : Switch for Audi magnetic ride
.,. To turn sport setting on/off, press the
switch
¢fi g. 81 .
Aud i magnetic ride is an electronica lly con
trolled damping system . This chassis system
assists the driver by adapting to the particu lar
situation through imperceptible control proc
esses. The damping provides individual modu
lation of damping forces. For example, with
damping characteristics set to prov ide greater
comfort, damping is set somewhat harder for
a brief period only as required, when rounding
a curve and when brak ing.
Standard setting
Select the standard setting if you prefer a sus
pension setting emphasizing comfort.
Sport setting
Select the sport setting if you prefer a sporty
suspension setting. The LED in the button
II]
comes on to indicate sport setting.
@ Tips
The warning/indicator light Bin the instru
ment cluster comes on in the event of a
malfunction. Drive to the closest author-
On the road 75
ized Audi dealer as soon as possible and
have the malfunction repaired.
Sporty driving
Warming up and cooling down
By carefully warming up and cooling down
you r vehicle, you can help ensure that it is not
overstressed unnecessar ily during sporty driv
ing .
When warm ing up, the vehicle is driven at a
maximum engine speed of 6000 RPM
(Vl0 engine) or 7000 RPM (V8 engine) in or
der to raise the engine oil temperature to a
minimum of 140 °F (60 °C). The tires also on
ly reach their full road holding capability once
they have warmed up.
The cooling fan can cont inue to run in your ve
hicle after the engine is switched off. Howev
er, driving the vehicle to coo l it down is partic
ularly important. During sporty driving, the
engine and brakes, the exhaust system, and
the transmission all become extremely hot.
Before you park the vehicle, you should drive
it for a few m iles/kilometers at light load in
the low rpm range to allow it to cool down.
Driving on a track
Before you take your vehicle out on a track ,
ensure that it is in perfect condition. For ex
amp le, you should check the tire tread and the
brake pads. It is best to increase tire pressure
by about 0.3 bar.
When driving on a track, oil consumption may
be somewhat higher than in "normal" opera
tion
r=> page 178.
You should definitely inspect your vehicle af
ter subject ing it to severe conditions . Are the
brake pads OK? Is there anything unusual
about the tires, including the inner and outer
sidewalls (e.g. tread, blistering)? Are the air
intakes free of leaves and tire dust? Is the oil
level OK? .,,.