2014.5 Citroen C4 DAG lock

75 
C4-2_en_Chap04_ouvertures_ed01-2014
Operating fault
When the ignition  is  switched  on,  fixed illumination
 of  the  indicator  lamp  in  the button

  indicates   a   fault   with   the   system.
Have
 
it
 
checked
 
by
 
a
 
CITROËN
 
dealer
 
or

  a   qualified   workshop.
Locking the vehicle with exterior
perimeter monitoring only
Deactivate the  interior  volumetric  and  anti-tilt
 monitoring  to  avoid  unwanted  
triggering

 
of
 
the
 
alarm
 
in
 
certain
 
cases
 
such

  as:
-
 
leaving
  a   pet   in   the   vehicle,
-
 
leaving
  a   window   partially   open,
-
 
washing
  your   vehicle,
-
 
changing
  a   wheel,
-
 
having
  your   vehicle   towed,
-
 
transport
  by   sea.
Deactivation of the interior
volumetric and anti-tilt monitoring
F
 
Switch
  off   the   ignition.
F
 
Within
 
ten
 
seconds,
 
press
 
the
 
but
-
ton
 
until
 
the
 
indicator
 
lamp
 
is
 
on
 
continuously

.
F
 
Get
  out   of   the   vehicle.
F
 
Press
 
the
 
locking
 
button
 
on
 
the
 
re
-
mote
  control   immediately. The
 
exterior
 
perimeter
 
monitoring
 
alone
 
is

 
activated:
 
the
 
indicator
 
lamp
 
in
 
the
 button
  flashes   once   per   second.
To  
be
 
ef
fective,  
this
 
deactivation
 
must

 
be
 
carried
 
out
 
each
 
time
 
the

  ignition   is   switched   off.
Reactivation of the interior
volumetric and anti-tilt monitoring
F
 
Press
 
the
 
unlocking
 
button
 
on
 
the
 
remote

 
control
 
to
 
deactivate
 
the
 
ex
-
terior
  perimeter   monitoring.
F
 
Press
 
the
 
locking
 
button
 
on
 
the
 
re
-
mote
 
control
 
to
 
activate
 
all
 
the
 
moni
-
toring
  functions.
The
 
indicator
 
lamp
 
in
 
the
 
button
 
again
 
flashes

  once   per   second.
Triggering of the alarm
This is indicated  by  sounding  of  the  si -
ren  and  flashing  of  the  direction  indica -
tors
  for   thirty   seconds.
The
 
monitoring
 
functions
 
remain
 
ac
-
tive
 
until
 
the
 
alarm
 
has
 
been
 
triggered
 
eleven

  times   in   succession.
When
 
the
 
vehicle
 
is
 
unlocked
 
using
 
the
 
remote

 
control,
 
rapid
 
flashing
 
of
 
the
 
in
-
dicator
 
lamp
 
in
 
the
 
button
 
informs
 
you
 
that

 
the
 
alarm
 
was
 
triggered
 
during
 
your
 
absence.

 
When
 
the
 
ignition
 
is
 
switched
 
on,

  this   flashing   stops   immediately.
Failure of the remote control
To deactivate the monitoring functions:
F  
unlock
 
the
 
vehicle
 
using
 
the
 
key
 
in
 
the

  driver's   door   lock,
F
 
open
 
the
 
door;
 
the
 
alarm
 
is
 
triggered,
F

 
switch
 
on
 
the
 
ignition;
 
the
 
alarm stops;

 
the
 
indicator
 
lamp
 
in
 
the
 
button goes

  off.
Locking the vehicle without
activating the alarm
F Lock or  deadlock  the  vehicle  using  the
  key   in   the   driver's   door   lock.
4
ACCESS

76 
C4-2_en_Chap04_ouvertures_ed01-2014
DOORS
Opening
F After unlocking  the  vehicle  com -
pletely  using  the  remote  control  or  
the

  key,   pull   the   door   handle.
From outside
When  
the
 
selective
 
unlocking
 
is
 
activated,

 
the
 
first
 
press
 
of
 
the
 
remote

 
control
 
unlocking
 
button
 
permits

 
unlocking
 
of
 
the
 
driver's
 
door

  only. F

Pull the
interior control lever of a
front  
door;
 
this
 
unlocks
 
the
 
vehicle
 
completely

.
From inside
With  
the
 
selective
 
unlocking
 
ac
-
tivated:
-
 
opening
 
the
 
the
 
driver's
 
door
 
unlocks

 
the
 
driver's
 
door
 
only
 
(if

 
the
 
vehicle
 
has
 
not
 
already
 
been

  completely   unlocked).
-
 
opening
 
one
 
of
 
the
 
passen
-
ger
 
doors
 
unlocks
 
the
 
rest
 
of
 
the

  vehicle.
Closing
When a door is not closed correctly:
-  
when the engine is run
-
ning,
 
this
 
warning
 
lamp
 
comes

 
on,
 
accompanied
 
by
 
an

 
alert
 
message
 
for
 
a
 
few
 
seconds,
-

 
when the vehicle is moving
 
(speed
 
higher

 
than
 
6
  mph  
(10
  km/h)),  
this
 
warning

 
lamp
 
comes
 
on,
 
accom
-
panied
 
by
 
an
 
alert
 
message
 
for
 
a
 

few

  seconds.
4
ACCESS

77 
C4-2_en_Chap04_ouvertures_ed01-2014
BOOT
Opening
F After unlocking  the  boot  or  the  ve -
hicle  using  the  remote  control  or  the  
key

,  
press
 
the
 
opening
 
control,
 
then
 
raise

  the   tailgate.
Closing
F Lower the  tailgate  using  the  interior  grab
  handle.
F
 
If
 
necessary
,  
press
 
down
 
on
 
the
 
tail
-
gate
  to   fully   close   it.
Tailgate release
System allowing the  mechanical  unlock -
ing  of  the  boot  in  the  event  of  a  battery  or central

  locking   system   malfunction.
Unlocking
F
 
Fold
 
back
 
the
 
rear
 
seats
 
to
 
gain
 
access

 
to
 
the
 
lock
 
from
 
inside
 
the
 
boot.
F

 
Insert
 
a
 
small
 
screwdriver
 
into
 
hole
 
A

of
  the   lock   to   unlock   the   tailgate.
F
 
Move
  the   latch   to   the   left.
If
 
the
 
tailgate
 
is
 
not
 
closed
 
correctly:
-
 
when

the engine is running,
this
 
warning

 
lamp

 
comes

 
on, accompanied

 
by

 
the

 
display of

 
an

 
alert

 
message

 
for

 
a

 
few seconds,
-

 
when the vehicle is moving

 
(speed above

 
6

 
mph
 
(10

 
km/h)),
 
this

 
warn

-
ing
 
lamp

 
comes

 
on,

 
accompanied

 
by an

 
audible

 
signal

 
and

 
the

 
display

 
of an

 
alert
 
message
 
for
 
a
 
few
 
seconds. Locking after closing
If
 
the
 
fault
 
persists
 
after
 
closing
 
again,
 
the

  boot   will   remain   locked.
4
ACCESS

78 
C4-2_en_Chap04_ouvertures_ed01-2014
ELECTRIC WINDOWS
Fitted with a  safety  anti-pinch  system  and
 a  deactivation  system  for  the  rear  
controls.
1.


Driver's electric window
.
2.

Passenger's electric window
.
3.

Rear right electric window
.
4.

Rear left electric window
.
5.

Deactivation of the rear electric
window controls. The

 
electric
 
window
 
controls
 
remain

 
operational
 
for
 
approxi
-
mately
 
45
 
seconds
 
after
 
the
 
i

 
gnition
 
is
 
switched
 
of
f  
or
 
until
 
the

 
vehicle
 
is
 
locked
 
after
 
a
 
door
 
is

  opened.
If
 
one
 
of
 
the
 
passenger
 
windows
 
cannot

 
be
 
operated
 
from
 
the
 
driver's

 
door
 
control
 
panel,
 
carry
 
out

 
the
 
operation
 
from
 
the
 
con
-
trol
 
panel
 
of
 
the
 
passenger
 
door
 
concerned,

  and   vice   versa.
After approximately ten  consecutive complete
 opening/closing  move -
ments
 
of
 
the
 
window
,  
a
 
protection function

 
is
 
activated
 
which
 
only
 
au
-
thorises
 
closing
 
of
 
the
 
window
 
to prevent

 
damage
 
to
 
the
 
electric
 
win
-
dow
  motor.
Once
 
the
 
window
 
is
 
closed,
 
the
 
con
-
trols
 
will
 
become
 
available
 
again
 
af
-
ter
  approximately   40   minutes.
If the window  cannot  be  closed  (for
 example,  in  the  presence  of  
ice),

 
once
 
the
 
window
 
has
 
low
-
ered:
F
 
press
 
and
 
hold
 
the
 
control
 
until

  the   window   opens   fully,
F
 
then
 
pull
 
the
 
control
 
immedi
-
ately
 
and
 
hold
 
it
 
until
 
the
 
win
-
dow
  closes,
F
 
continue
 
to
 
hold
 
the
 
control
 
for

 
approximately
 
one
 
sec
-
ond
 
after
 
the
 
window
 
has
 
closed.
The

safety anti-pinch func-
tion is not operational during
these operations.
There
 
are
 
two
 
options:
-
 
manual mode
F

 
Press

 
or

 
pull

 
the

 
control

 
gently

.
 
The window

 
stops

 
when

 
the

 
control

 
is released.
-

 
automatic mode
F

 
Press

 
or

 
pull

 
the

 
control

 
firmly

.
 
The

 
window

 
opens

 
or

 
closes

 
fully

 
when

 
the
 
control
 
is
 
released.
F
 
Pressing

 
the

 
control

 
again

 
stops

 
the

 
movement
 
of
 
the
 
window.
Safety anti-pinch
When 
the
 
window
 
rises
 
and
 
meets
 
an
 
obstacle,

 
it
 
stops
 
and
 
partially
 
lowers
 
again.
One-touch electric windows
4
ACCESS

55
86 
C4-2_en_Chap05_visibilite_ed01-2014
Switching off
The 
welcome
 
lighting
 
switches
 
of
f  
au
-
tomatically
 
after
 
a
 
programmed
 
time,
 
when

 
the
 
ignition
 
is
 
switched
 
on
 
or
 
on
 
locking

  the   vehicle.
Welcome lighting
Switching onF  
Press
 
the
 
open
 
padlock
 
on
 
the

 
remote
 
control;
 
your
 
ve
-
hicle
  is   unlocked.
The
 
remote
 
switching
 
on
 
of
 
the
 
light
-
ing  
makes
 
your
 
access
 
to
 
the
 
vehicle
 
easier

 
in
 
poor
 
light.
 
It
 
is
 
activated
 
de
-
pending  
on
 
the
 
light
 
level
 
detected
 
by
 
the

  sunshine   sensor.
The  
sidelamps
 
and
 
dipped
 
beam
 
head
-
lamps,
 
as
 
well
 
as
 
the
 
side
 
spotlamps,
 
lo
-
cated
  under   the   door   mirrors,   come   on.Programming
Activation  
or
 
deactivation,
 
as
 
well

 
as
 
the
 
duration
 
of
 
the
 
light
-
ing  
duration
 
for
 
the
 
welcome
 
lighting

 
can
 
be
 
set
 
via
 
the
 
ve
-
hicle   configuration   menu.
VISIBILITY

55
93 
C4-2_en_Chap05_visibilite_ed01-2014
1. Front courtesy lamp
2.
Front map reading lamps
3.


Rear courtesy lamp
4.


Rear map reading lamps
COURTESY LAMPS
- when  the   vehicle   is   unlocked,
-  
when
 
the
 
key
 
is
 
removed
 
from
 
the
 
ignition,
-

 
on
  opening   a   door,
-
 when

 
the
 
remote
 
control
 
locking
 
but
-
ton
  is   used   to   locate   your   vehicle.
Front and rear courtesy lamps
In this position, the courtesy
lamp  comes   on   gradually:
It
 
switches
 
off   gradually:
-
 
when

 
the   vehicle   is   locked,
-
 
when

 
the   ignition   is   switched   on,
-
 
30

 
seconds  
after
 
the
 
last
 
door
 
is
 
closed. T

o  
switch
 
of
f  
the
 
rear
 
courtesy
 
lamp,
 
put
 
it

  in   the   the   "permanently   off"   position.
Permanently
  off.
Permanent
  lighting. In
 
permanent
 
lighting
 
mode,
 
the
 lighting
 time  varies  according  to  the
  circumstances:
-
 
with
 
the
 
ignition
 
of
f,  
approxi
-
mately
  ten   minutes,
-
 in

 
energy
 
economy
 
mode,
 
ap
-
proximately
  thirty   seconds,
-
 
with
 
the
 
engine
 
running,
 
un
-
limited.
When
 
the
 
courtesy
 
lamp
 
is
 
in
 
the

 
"permanent
 
lighting"
 
posi
-
tion,
 
the
 
rear
 
courtesy
 
lamp
 
also
 
comes

 
on,
 
except
 
if
 
it
 
is
 
in
 
the
 
"permanently

  off"   position.
Front and rear map reading
lamps
Take care not  to  put  anything  in  contact
  with   the   courtesy   lamps.
F
 
With
 
the
 
ignition
 
on,
 
press
 
the

  corresponding   switch.
VISIBILITY

100 
C4-2_en_Chap06_amenagement_ed01-2014
FRONT ARMREST
Comfort and storage  device  for  the  driver and
  front   passenger.
The
 
length
 
of
 
the
 
armrest
 
cover
 
can
 
be
 
adjusted.
Longitudinal adjustment
F To move  forwards,  raise  the  lever .  The
 armrest  slides  forwards  to  its  
stop.
F

 
T
o  
stow
 
it,
 
slide
 
it
 
fully
 
back
 
and
 
press

  down   to   lock   it.
Storage
The armrest's compartment  can  hold  up
  to   6   CDs.
F
 
Raise
  the   cover   fully.
6
FITTINGS

77
120 
C4-2_en_Chap07_securite-enfants_ed01-2014
For optimum installation  of  the  "for -
ward-facing"  child  seat,  ensure  that  
the

 
back
 
of
 
the
 
child
 
seat
 
is
 
as
 
close
 
as

 
possible
 
to
 
the
 
backrest
 
of
 
the
 
ve
-
hicle's
  seat,   in   contact   if   possible.
You
 
mst
 
remove
 
the
 
head
 
restraint
 
before

 
installin
g  
a
 
child
 
seat
 
with
 
backrest

  to   a   passenger   seat.
Ensure
 
that
 
the
 
head
 
restraint
 
is
 
stored

 
or
 
attached
 
securely
 
to
 
pre
-
vent
 
it
 
from
 
being
 
thrown
 
around
 
the
 
vehicle

 
in
 
the
 
event
 
of
 
sharp
 
brak
-
ing.
 
Refit
 
the
 
head
 
restraint
 
when
 
the
 
child

  seat   is   removed.
ADVICE ON CHILD SEATS
Installing a booster seat
Children at the frontThe incorrect  installation  of  a  child  seat
 in  a  vehicle  compromises  the  
child's

 
protection
 
in
 
the
 
event
 
of
 
an
 
accident.
Ensure that there is no seat belt or
seat

 
belt
 
buckle
 
under
 
the
 
child
 
seat,
 
as

  this   could   destabilise   it.
Remember
 
to
 
fasten
 
the
 
seat
 
belts
 
or
 
the

 
child
 
seat
 
harnesses
 
keeping
 
the
 
slack

 
relative
 
to
 
the
 
child's
 
body
 
to
 
a
 
minimum,

  even   for   short   journeys.
When
 
installin
g  
a
 
child
 
seat
 
using
 
the
 
seat belt, ensure that the seat belt is
tightened

 
correctly
 
on
 
the
 
child
 
seat
 
and

 
that
 
it
 
secures
 
the
 
child
 
seat
 
firm
-
ly
 
on
 
the
 
seat
 
of
 
your
 
vehicle.
 
If
 
your
 
passenger

 
seat
 
is
 
adjustable,
 
move
 
it
 
forwards

  if   necessary. The
 
legislation
 
on
 
carrying
 
children
 
on the

 
front
 
passenger
 
seat
 
is
 
specific
 
to each

 
country
.  
Refer
 
to
 
the
 
legislation in

  force   in   your   country.
Deactivate
 
the
 
passenger
 
airbag
 
when

 
a
 
"rearward-facing"
 
child
 
seat
 
is

  installed   on   the   front   seat.
Otherwise,
 
the
 
child
 
would
 
risk
 
being
 
seriously

 
injured
 
or
 
kille
d  
if
 
the
 
airbag
 
were

  to   inflate.The
 
chest
 
part
 
of
 
the
 
seat
 
belt
 
must
 
be

 
positioned
 
on
 
the
 
child's
 
shoulder
 
without

  touching   the   neck.
Ensure that the lap part of the seat
belt
 
passes
 
correctly
 
over
 
the
 
child's
 
thighs.
CITROËN

 
recommends
 
the
 
use
 
of
 
a

 
booster
 
seat
 
which
 
has
 
a
 
back,
 
fit
-
ted
 
with
 
a
 
seat
 
belt
 
guide
 
at
 
shoulder
 
level.
As

  a   safety   precaution,   do   not   leave:
-
 
a
 
child
 
or
 
children
 
alone
 
and
 
un
-
supervised
  in   a   vehicle,
-
 
a
 
child
 
or
 
an
 
animal
 
in
 
a
 
vehicle
 
which

 
is
 
exposed
 
to
 
the
 
sun,
 
with
 
the

  windows   closed,
-
 
the
 
keys
 
within
 
reach
 
of
 
children
 
inside

  the   vehicle.
At
 
rear
 
seating
 
positions,
 
always
 
leave

 
sufficient
 
space
 
between
 
the
 
front

  seat   and:
-
 
a
  "rearward   facing"   child   seat,
-
 
the
 
child's
 
feet
 
for
 
a
 
child
 
seat
 
fit
-
ted
  "forward   facing".
To
 
do
 
this,
 
move
 
the
 
front
 
seat
 
for
-
wards
 
and,
 
if
 
necessary
,  
move
 
its
 
backrest

  into   the   upright   position. To
 
prevent
 
accidental
 
opening
 
of
 
the
 
doors

 
and
 
rear
 
windows,
 
use
 
the
 
"Child

  lock".
Take
 
care
 
not
 
to
 
open
 
the
 
rear
 
win
-
dows
  by   more   than   one   third.
To
 
protect
 
young
 
children
 
from
 
the
 
rays

 
of
 
the
 
sun,
 
fit
 
side
 
blinds
 
on
 
the
 
rear

  windows.
CHILD SAFETY