2014.5 Citroen C4 DAG ignition

23 
C4-2_en_Chap01_controle-de-marche_ed01-2014
Warning/indicator lampis onCause Action/Observations
AdBlue
®
additive
(BlueHDi Diesel) fixed,
  on  
switching

  on  
the

  ignition,  
accompanied

  by  
an

  audible   signal  
and

  a   message  
indicating

  the  
remaining

  driving  
range.
The
  remaining   driving  
range

  is   between   350   miles  
(600 km)

  and   1500   miles  
(2400

  km).
Have   the  
AdBlue® additive tank topped up
 
as
 
soon
 
as
 
possible:   go   to   a  
CITROËN

 
dealer

 
or
 
a
 
qualified
 
workshop,
 
or carry out this operation yourself by
referring

 
to
 
the
 
corresponding   section.
+
flashing associated with the SER VICE
warning
  lamp,  
accompanied

  by  
an

  audible   signal  
and

  a   message  
indicating

  the  
remaining

  driving  
range.
The remaining driving range is  between   0   and   375   miles  
(600

  km). You
  must   top-up the  AdBlue® additive tank
 
to
 
avoid a breakdown:
 
go   to   a  
CITROËN

 
delaer

 
or

 
a

 
qualified
 
workshop,
 
or carry out this operation yourself by
referring

 
to
 
the
 
corresponding
  section.
flashing,
 
associated

 
with
 
the SER

VICE
warning
 
lamp,
 
accompanied

 
by
 
an

 
audible
 
signal
 
and

 
a
 
message
 
indicating

 
that
 
starting

 
is
 
prevented. The

 
AdBlue® tank is empty: the
 
starting
 
inhibition   system  
required

 
by
 
legislation  
prevents

 
starting   of   the  
engine. T

o   be   able   to   start   the   engine,   you   must  top-up the
 AdBlue® additive tank: go to a CITROËN
 dealer
 or
 a  qualified  workshop,  
or carry out this operation yourself by
referring

 
to
 
the
 
corresponding   section.
It is essential
 
to
 
add   at   least   3.8   litres   of  
AdBlue® to the additive tank.
1
MONITORING

24 
C4-2_en_Chap01_controle-de-marche_ed01-2014
Warning/indicator lampis onCause Action/Observations
+
+ SCR emissions
control system
(BlueHDi Diesel)
fixed, on  switching  on
  the   ignition,  
associated

  with  
the

  SERVICE   and  
engine

  diagnostic  
warning

  lamps,  
accompanied

  by  
an

  audible   signal  
and

  a   message  
indicating

  an  
emissions

  control  
fault.
a fault with the SCR
emissions   control   system   has  
been

  detected. This
  alert   disappears   once   the   exhaust  
emissions

  return   to   normal   levels.
flashing, on switching  on  
the

  ignition,  
associated

  with  
the

  SERVICE   and  
engine

  diagnostic  
warning

  lamps,  
accompanied

  by   an  
audible

  signal   and   a  
message

  indicating  
the

  remaining  
driving

  range.
The remaining driving range is  between   0   and   650   miles  
(1
  100   km). Contact
  a   CITROËN   dealer   or   a   qualified  workshop
  without delay, to avoid a
breakdown.
flashing, on switching   on  
the

  ignition,  
associated

  with  
the

  SERVICE   and  
engine

  diagnostic  
warning

  lamps,  
accompanied

  by   an  
audible

  signal   and   a  
message

  indicating  
that

  starting   is  
prevented.
You have exceeded the authorised  driving   limit:   the  
starting

  inhibition   system  
prevents

  starting   of   the  
engine. T

o   be   able   to   start   the   engine,   you   must
call
  on   a   CITROËN   dealer   or   a   qualified  
workshop.
1
MONITORING

26 
C4-2_en_Chap01_controle-de-marche_ed01-2014
Warning/indicator lampis onCause Action/Observations
Parking brake fixed.The
 
parking
 
brake
 
is
 
applied
 
or

  not   properly   released.Release
  the   parking   brake   to   switch   off  
the

  warning   lamp,   keeping   your   foot   on  
the

  brake   pedal.
Observe
  the   safety   recommendations.
For
  more   information   on   the   parking  
brake,

  refer   to   the   "Parking   brake"   and  
"Electric

  parking   brake"   sections.
Electric
parking brake fixed.The
  electric   parking   brake   is  
applied.Release

  the   electric   parking   brake   to  
switch

  off   the   warning   lamp:   with   your  
foot

  on   the   brake   pedal,   pull   the   electric  
brake

  control.
Observe
  the   safety   recommendations.
For
  more   information   on   the   electric  
parking

  brake,   refer   to   the   "Driving"  
section.
Deactivation of the automatic functions of the electric
parking brake fixed.The

  "automatic   application"  
(on

  switching   off   the   engine)  
and

  "automatic   release"  
functions

  are   deactivated   or  
faulty

.Activate
  the   function   (according   to  
country)

  via   the   vehicle   configuration  
menu

  or   contact   a   CITROËN   dealer   or   a  
qualified

  workshop.
Diesel engine pre-heating fixed.The
  key   is   at   position   2  
(ignition

  on)   in   the   ignition  
switch.W

ait   until   the   warning   lamp   goes   off  
before

  starting.
The
  period   of   illumination   of   the   warning  
lamp

  is   determined   by   the   climatic  
conditions

  (up   to   about   thirty   seconds   in  
extreme

  climatic   conditions).
If
  the   engine   does   not   start,   switch   the  
ignition

  off   and   then   on,   wait   until   the  
warning

  lamp   goes   off   again,   then   start  
the

  engine.
1
MONITORING

30 
C4-2_en_Chap01_controle-de-marche_ed01-2014
Service indicator
System that informs  the  driver  when  the  next
 service  is  due,  in  accordance  with  
the

  manufacturer's   service   schedule.
The
 
point
 
at
 
which
 
the
 
service
 
is
 
due
 
is
 
calculated

 
from
 
the
 
last
 
service
 
indica
-
tor
 
zero
 
reset,
 
according
 
to
 
the
 
distance
 
covered

 
and
 
the
 
time
 
elapsed
 
since
 
the
 
last

  service.
For
b lueH d i d iesel versions, the level
of
 
deterioration
 
of
 
the
 
engine
 
oil
 
may
 
also

 
be
 
taken
 
into
 
account,
 
depending
 
on

  the   country   of   sale.
More than 1800 miles (3000 km)
remain before the next service is due
When the ignition  is  switched  on,  no  service
 information  appears  in  the  in -
strument
  panel   central   screen.
Between 600 miles (1 000 km) and
1800 miles (3 000 km) remain before
the next service is due
For a  few  seconds  after  the  ignition  is  switched
 on,  the  spanner  symbolising  
the

 
service
 
operations
 
comes
 
on.
 
The
 
distance

 
recorder
 
display
 
line
 
or
 
a
 
spe
-
cific
 
message
 
in
 
the
 
instrument
 
panel
 
central

 
screen
 
indicates
 
the
 
distance
 
re
-
maining
  before   the   next   service   is   due.
For example:
 
1
 
700
 
miles
 
(2
 
800
 
km)
 
remain

  before   the   next   service   is   due.
For
 
a
 
few
 
seconds
 
after
 
the
 
ignition
 
is
 
switched

  on,   the   screen   indicates:
Less than 600 miles (1 000 km)
remain before the next service is due
Example: 560 miles  (900  km)  remain  before
  the   next   service   is   due.
For
 
a
 
few
 
seconds
 
after
 
the
 
ignition
 
is
 
switched

  on,   the   screen   indicates:
A
 few

 
seconds

 
after

 
the

 
ignition

 
is

 
switched

 
on,

 
the spanner goes off

; the
distance
 
recorder

 
resumes

 
its

 
normal

 
operation.

 
The

 
screen

 
then

 
indicates

 
the

 
total
 
and
 
trip
 
distances. A
 few

 
seconds
 
after
 
the
 
ignition
 
is
 
switched

 
on,
 
the
 
distance
 
recorder
 
resumes

 
its
 
normal
 
operation.
 
The
spanner remains on

 
to
 
indicate
 
that
 
a
 
service

  must   be   carried   out   soon.
1
MONITORING

31 
C4-2_en_Chap01_controle-de-marche_ed01-2014
Service overdue
For 
a
 
few
 
seconds
 
after
 
the
 
ignition
 
is
 
switched

 
on,
 
the
spanner flashes to
indicate
 
that
 
the
 
service
 
must
 
be
 
car
-
ried
  out   as   soon   as   possible.
Example:
 
the
 
service
 
is
 
overdue
 
by
 
180

  miles   (300   km).
For
 
a
 
few
 
seconds
 
after
 
the
 
ignition
 
is
 
switched

  on,   the   screen   indicates:
A
 few

 
seconds
 
after
 
the
 
ignition
 
is
 
switched

 
on,
 
the
 
distance
 
recorder
 
re
-
sumes
 
its
 
normal
 
operation.
 
The span
-
ner remains on. The
 spanner  comes  on  if  you  
have

 
exceeded
 
the
 
specified
 
time

 
interval
 
since
 
the
 
last
 
ser
-
vice,
 
as
 
indicated
 
in
 
the
 
manu
-
facturer's
  service   schedule.
For
b lueH d i d iesel versions,
the
 
spanner
 
may
 
also
 
come
 
on
 
before

 
the
 
normal
 
service
 
point,
 
according

 
to
 
the
 
level
 
of
 
dete
-
rioration
 
of
 
the
 
engine
 
oil,
 
which
 
depends

 
on
 
the
 
driving
 
condi
-
tions
  of   the   vehicle.
Service indicator zero reset This operation cannot be car-
ried
 
out
 
while
 
a
 
reminder
 
of
 
the
 
servicing

 
information
 
is
 
being
 
displayed.
Following

 
this
 
operation,
 
if
 
you
 
wish

 
to
 
disconnect
 
the
 
battery
,  
lock

 
the
 
vehicle
 
and
 
wait
 
at
 
least
 
five

 
minutes
 
for
 
the
 
zero
 
reset
 
to
 
be

  registered.
Recalling the service information
You
 
can
 
recall
 
the
 
service
 
information
 
at

  any   time.
F
 
Briefly
 
press
 
the
 
".../000"
 
trip
 
dis
-
tance
  recorder   zero   reset   button.
 The

 
service
 
information
 
is
 
displayed
 
for

  a   few   seconds.
After
 
each
 
service,
 
the
 
service
 
indicator
 
must

  be   reset   to   zero.
If
 
you
 
have
 
carried
 
out
 
the
 
service
 
on
 
your

  vehicle   yourself:
F
 
switch
  off   the   ignition,
F
 
press
 
and
 
hold
 
the
 
".../000"
 
trip
 
dis
-
tance
  recorder   zero   reset   button,
F
 
switch
 
on
 
the
 
ignition;
 
the
 
distance
 
recorder

 
display
 
begins
 
a
 
count
-
down,
F
 
when
 
the
 
screen
 
indicates
 
"=/0"

and
 
the
 
spanner
 
disappears,
 
re
-
lease
  the   button.
For
b lueH d i d iesel versions, this alert
is
 
also
 
accompanied
 
by
 
the
 
fixed
 
illu-
mination

 
of
 
the
 
Service
 
warning
 
lamp
 
when

  the   ignition   is   switched   on.
1
MONITORING

32 
C4-2_en_Chap01_controle-de-marche_ed01-2014
Distance recorders
The total and  trip  distances  are  dis -
played  for  thirty  seconds  when  the  ig -
nition
 
is
 
switched
 
of
f,  
when
 
the
 
driver's
 
door

 
is
 
opened
 
and
 
when
 
the
 
vehicle
 
is
 
locked

  or   unlocked.
Trip distance recorder Total distance recorder
Setting the time and the time
format in the instrument panel
without audio system
On the  two-tone  instrument  panel  with -
out  audio  system,  to  adjust  the  time,  
use buttons

A  
and
 
B
then carry out the
operations
  in   the   following   order:
F

press buttons
A  
and
 
B
 
simultane
-
ously:
  the   minutes   flash,
F
press A
 
to
 
increase
 
the
 
minutes
 
or
 
B

  to   reduce   the   minutes,
F

press buttons
A  
and
 
B
 
simultane
-
ously:
  the   hours   flash,
F
press A to increase the hours or B
to
  reduce   the   hours,
F

press buttons
A  
and
 
B
 
simultane
-
ously:
 
24
 
H
 
or
 
12
 
H
 
is
 
displayed
 
and
 
flashes,
F


press button
A or B  
to
 
change
 
the
 
format,
F


press buttons
A  
and
 
B
 
simultane
-
ously
  to   exit   from   time   setting.
After approximately 30  seconds  without  any  ac -
tion,   the   screen   returns   to   the   normal   display.
Measures the total  distance  travelled  by
 the  vehicle  since  its  first  registration.
Measures
 
the
 
distance
 
travelled
 
since
 
it
 
was

  last   reset   to   zero   by   the   driver.
F
 
With
 
the
 
ignition
 
on,
 
press
 
and
 
hold
 
this

  button   until   zeros   appear. On
 
the
 
two-tone
 
instrument
 
panel
 
with
-
out  
audio
 
system,
 
to
 
change
 
the
 
display
 
units, use buttons

A  
and
 
B
then carry
out   the   operations   in   the   following   order:
F
press buttons
A  
and
 
B
 
simultane
-
ously  
for
 
three
 
seconds:
 
km/h
 
or
 
mph

  flashes,
F
press button
A or B  
to
 
change
 
the
 
units,
F

press buttons
A  
and
 
B
 
simultane
-
ously   to   exit   from   setting   units.
After  approximately  30  seconds  without  any action, the screen returns to the
normal
  display
Setting units in the instrument
panel without audio system
Setting the time and units in the
multifunction screen
The other instrument  panels  are  as -
sociated  with  an  audio  system  and  a  
multifunction

 
screen.
 
Refer
 
to
 
the
 
cor
-
responding
  screens.
1
MONITORING

34 
C4-2_en_Chap01_controle-de-marche_ed01-2014
In the instrument  panel,  you  can  change the
 colour  of  its  dials  (button  A)
 indepen -
dently
  from   that   of   the   screens   (button   B).
There
 
are
 
five
 
colour
 
variants,
 
from
 
white

  to   blue.
F

press
the appropriate button as
many
 
times
 
as
 
needed
 
to
 
obtain
 
the
 
desired

  colour. This
 
menu
 
allows
 
you
 
to
 
choose
 
a
 
fam
-
ily  
of
 
polyphonic
 
sounds
 
from
 
the
 
four
 
available.

 
These
 
sounds
 
are
 
grouped
 
together

 
in
 
a
 
family
 
and
 
are
 
adapted
 
to

 
suit
 
the
 
situation
 
and
 
context
 
(alert,
 
confirmation,

 
rejection,
 
direction
 
indica
-
tors,   lighting   left   on,   key   in   ignition...).
Customising the instrument
panel colours
Customising the polyphonic
sounds
For the customisable colour
instrument panel with audio or
navigation system
F

Press the
"MENU" button for ac-
cess
  to   the   main   menu.
F
 
Select
 
the
 
"Personalisation-confi
-
guration"

  menu   and   confirm.
F
 
Select
 
the
 
"Choice
 
of
 
sounds"
 
line
 
and

  confirm.
F
 
Select
 
the
 
desired
 
family
 
of
 
sounds
 
and

  confirm.
F
 
Save
 
the
 
modifications
 
by
 
confirm
-
ing
  "OK". For
 
safety
 
reasons,
 
the
 
driver must

 
only
 
carry
 
out
 
these
 
opera
-
tion   when   stationary.
1
MONITORING

22
40 
C4-2_en_Chap02_ecran-multifonction_ed01-2014
Choice of language
Once 
this
 
menu
 
has
 
been
 
selected,
 
you
 
can

 
choose
 
the
 
language
 
used
 
by
 
the
 
display

  from   a   pre-defined   list.
For
 
safety
 
reasons,
 
configura
-
tion
 
of
 
the
 
multifunction
 
screen
 
by

 
the
 
driver
 
must
 
only
 
be
 
done
 
when

  stationary.
Display configuration
This
 
menu
 
gives
 
access
 
to
 
the
 
following
 
settings:
-

 
"Choice
  of   units",
-
 
"Date
  and   time   adjustment",
-
 
"Display
  parameters",
-
 
"Brightness". Choice of sounds
This

 
menu
 
allows
 
you
 
to
 
choose
 
a
 
fam
-
ily
 
of
 
polyphonic
 
sounds
 
from
 
the
 
four
 
available.

 
These
 
sounds
 
are
 
grouped
 
together

 
in
 
a
 
family
 
and
 
are
 
adapted
 
to

 
suit
 
the
 
situation
 
and
 
context
 
(alert,
 
confirmation,

 
rejection,
 
direction
 
indica
-
tors,
  lighting   left   on,   key   in   ignition...).
Adjusting the date and time
F

Press
the "7" or "8" button to
display
 
the
 
"Display
 
configuration"
 
menu,

  then   press   "OK".
F

Press
the "5" or "6" button to se-
lect
 
the
 
"Date
 
and
 
time
 
adjustment"
 
button, then press

"OK".
F

Press
the "7" or "8" button to se-
lect
 
the
 
setting
 
to
 
modify
.  
Confirm
 
by

 
pressing
 
"OK"
,  
then
 
modify
 
the
 
setting

 
and
 
confirm
 
again
 
to
 
save
 
the

  modification.
F
 
Adjust
 
the
 
settings
 
one
 
by
 
one,
 
con
-
firming
  with   the   "OK"   button.
F

Press the "
5" or "6" button, then
the "OK" button to select the "OK"
box
 
and
 
confirm
 
or
 
the
 
"Back"
but-
ton
  to   cancel.
MULTIFUNCTION SCREENS