2013 TOYOTA LAND CRUISER lock

[x] Cancel search: lock

Page 596 of 720

TOYOTA LAND CRUISER 2013 J200 Owners Manual 596 4-3. Do-it-yourself maintenance
LC200_OM_OM60F57U_(U)
CAUTION
■Discharge headlights
●Contact your Toyota dealer before replacing high-intensity discharge
headlights (including light bulbs).

Page 600 of 720

TOYOTA LAND CRUISER 2013 J200 Owners Manual 600 5-1. Essential information
LC200_OM_OM60F57U_(U)
■Emergency towing procedure
The engine must be in ACCESSORY mode (engine off) or IGNI-
TION ON mode (engine running).
Put the four-wheel drive co

Page 602 of 720

TOYOTA LAND CRUISER 2013 J200 Owners Manual 602 5-1. Essential information
LC200_OM_OM60F57U_(U)
Towing with a wheel lift-type truck
From front
Use a towing dolly under the rear
wheels.
From rear
Use a towing dolly under the
front wheels.
NOTIC

Page 611 of 720

TOYOTA LAND CRUISER 2013 J200 Owners Manual 5
When trouble arises
611 5-2. Steps to take in an emergency
LC200_OM_OM60F57U_(U)
■If the malfunction indicator lamp comes on while driving
First check the following:
●Is the fuel empty?
If it is

Page 618 of 720

TOYOTA LAND CRUISER 2013 J200 Owners Manual 618 5-2. Steps to take in an emergency
LC200_OM_OM60F57U_(U)
Have the vehicle inspected immediately.
Failure to investigate the cause of the following warnings may lead to
the system operating abnorma

Page 629 of 720

TOYOTA LAND CRUISER 2013 J200 Owners Manual 5
When trouble arises
629 5-2. Steps to take in an emergency
LC200_OM_OM60F57U_(U)
Once
(Flashes)• When the doors 
were unlocked with 
the mechanical 
key and then the 
“ENGINE START 
STOP” s

Page 630 of 720

TOYOTA LAND CRUISER 2013 J200 Owners Manual 630 5-2. Steps to take in an emergency
LC200_OM_OM60F57U_(U)
Once
(Flashes)A door was 
opened and closed 
with the “ENGINE 
START STOP” 
switch turned off 
and then the 
“ENGINE START 
STOP

Page 647 of 720

TOYOTA LAND CRUISER 2013 J200 Owners Manual 5
When trouble arises
647
5-2. Steps to take in an emergency
LC200_OM_OM60F57U_(U)
If the engine will not star t
If the engine still does not start after following the correct starting
procedure (P