09-4
2. CAUTIONS
Note that the display does not show everything in the rear area. Always check nobody, especially
animals and children, is behind the vehicle when parking or reversing.
If you can not properly check the vehicle behind, get out of the vehicle and then visually check it.
The parking aid system is just a supplemental device to help your parking.
Always keep the safety precautions.
Do not press or shock the sensors by hitting or using a high-pressure water gun while washing,
since it may damage the sensors.
If the system is in normal operating condition, a short beep sounds when the shift lever is moved into
"R" position with the ignition key "ON". -
-
-
-
-
-
The parking aid system will not work or improperly work under following cases: ▶
1. Certain obstacles that sensors can not detect
Thin and narrow objects, such as wires, ropes, chains
Cotton, sponge, clothes, snow; that absorb ultrasonic waves
Obstacles lower than the bumper (ex. drain ditch or mud puddle) -
-
-
2. Not defective but improperly working
When the sensing portion is frozen (operates normally after thawed)
When the sensing portion is covered by rain, water drops, snow or mud (operates normally after
cleaned)
When receiving other ultrasonic signals (metal sound or air braking noises from heavy
commercial vehicles)
When a high-power radio is turned on -
-
-
-
3. Narrowed sensing area
When the sensing portion is partially covered by snow or mud (operates normally after cleaned)
<007a009c009900990096009c0095008b00900095008e0047009b008c00940097008c00990088009b009c0099008c00470096008d0047009a008c0095009a0096009900470090009a0047009b009600960047008f0090008e008f0047004f00880097009700
990096009f005500470096009d008c00990047005f005700b6>C) or too low (approx.
below -30°C) -
-
When driving on the rough roads, gravel road, hill and grass
When the bumper height is changed due to heavy load
When the sensing portion is frozen
When the sensing portion is covered by rain, water drops, snow or mud
When receiving other ultrasonic signals (metal sound or air braking noises from heavy
commercial vehicles)
When a high-power radio is turned on
When some accessories are attached in detecting ranges -
-
-
-
-
-
- 4. Not defective but may cause malfunction
10-38910-00
Unit Description Specification
Micro-pole antennaOperating current up to 150 mA
Operating voltage DC 10.5 ~ 16.0 V
Operating temperature-30˚C ~ 60˚C
Storage temperature-40˚C ~ 80˚C
Input/output impedence75Ω (FM)
1. SPECIFICATION
Unit Description Specification
GeneralRated voltage DC 14.4 V
Operating voltage 10.8 ~ 16.0 V
Operating temperature-20˚C ~ 70˚C
Storage temperature-40˚C ~ 80˚C
RadioFrequency rangeFM: 87.5 ~ 108 MHz (50 kHz STEP)
MW: 522 ~ 1620 kHZ (9 kHz STEP)
LW: 144 ~ 290 kHz (1 kHz STEP)
Channels FM1: 6, FM2: 6, MW: 6, LW: 6
PerformanceSpeaker output45 W/CH (4Ω)
Speaket impedence4Ω
Current consumption below 5 A, max. 10 A
Parasitic current below 3 mA
BluetoothPerformance HFP A2DP.AVRCP
Configuration MD-5XR
Technology Bluetooth 2.0 + EDR
LCDOperating voltage 9.0 V
Operating temperature-30˚C ~ 75˚C
Storage temperature-40˚C ~ 80˚C
DOT 132 x 36
